<i>Pten</i> regulates neurogenic radial glia lineage progression and tunes neocortical astrocyte production in <i>Mapk1/3</i>-dependent pathway.
10 blocks of code here have a permanent identifier (oscr:b:…), listed with the matches below: citable for good, with a page of its own. Select a match and press Cite to copy it. What a block identifier is.
The 11 matches
- [1] § MATERIALS AND METHODS › Method details › scRNA-seq analysis ↔ scRNA-Seq/final/scripts/step02_analysis.R, lines 284 to 326 · score 0.90 · nCount_RNA, nFeature_RNA, percent.mt, FindClusters, FindNeighbors, RunUMAP · block
oscr:b:GHD6B0RBT2Q56-A· Report a mismatch - [2] § MATERIALS AND METHODS › Method details › scRNA-seq analysis ↔ scRNA-Seq/biorxiv/scripts/step02_analysis.R, lines 43 to 87 · score 0.90 · nCount_RNA, nFeature_RNA, percent.mt, FindClusters, FindNeighbors, RunUMAP · block
oscr:b:PE1S1GC7XBHME-T· Report a mismatch - [3] § MATERIALS AND METHODS › Method details › scRNA-seq analysis ↔ scRNA-Seq/final/scripts/step02_analysis.R, lines 765 to 806 · score 0.84 · Cell cycle scoring, start cluster, end cluster, Seurat clustering, Slingshot, Trajectory · block
oscr:b:B4A2HGHZMR9HM-S· Report a mismatch - [4] § MATERIALS AND METHODS › Method details › scRNA-seq analysis ↔ scRNA-Seq/biorxiv/scripts/step02_analysis.R, lines 225 to 272 · score 0.82 · Cell cycle scoring, FindClusters, FindNeighbors, RunUMAP, dims, resolution · block
oscr:b:XGMWFP1W4BG2J-S· Report a mismatch - [5] § MATERIALS AND METHODS › Method details › Processing and statistical analysis of bulk RNA-seq data on enriched astrocyte samples ↔ bulk_RNASeq/biorxiv/scripts/astro_DE_analysis.v6.R, lines 492 to 557 · score 0.74 · log2 fold change, DEGs connected, GO term, enriched, gliogenesis, bulk · block
oscr:b:7QPXW3GXDG6T5-M· Report a mismatch - [6] § MATERIALS AND METHODS › Method details › scRNA-seq analysis ↔ scRNA-Seq/final/scripts/step03_post_iDEA_analysis.R, lines 299 to 338 · score 0.74 · simplifyEnrichment, signaling pathway, iDEA, GO term, cut, log10 · block
oscr:b:KBWK48PJHJG62-L· Report a mismatch - [7] § MATERIALS AND METHODS › Method details › scRNA-seq analysis ↔ scRNA-Seq/biorxiv/scripts/step03_post_iDEA_analysis.R, lines 142 to 180 · score 0.71 · simplifyEnrichment, DEG heatmaps, iDEA, GO term, pheatmap · block
oscr:b:TQ9939S0K8QNA-K· Report a mismatch - [8] § MATERIALS AND METHODS › Method details › Processing and statistical analysis of bulk RNA-seq data on enriched astrocyte samples ↔ bulk_RNASeq/biorxiv/scripts/astro_DE_analysis.v6.R, lines 96 to 136 · score 0.70 · low alignment rate, biological replicates, correlation, STAR, variable, bulk · block
oscr:b:7AAE1N2Q5QVZT-B· Report a mismatch - [9] § MATERIALS AND METHODS › Method details › STRING network analysis ↔ scRNA-Seq/final/scripts/step03_post_iDEA_analysis.R, lines 257 to 297 · score 0.53 · GO terms, TOR, JAK, Notch, db, mm · block
oscr:b:537R0XYBPKE2P-2· Report a mismatch - [10] § RESULTS › Single-cell RNA sequencing reveals highly cell type–specific deregulation of gene expression upon loss of Pten and Egfr ↔ scRNA-Seq/biorxiv/scripts/step02_analysis.R, lines 1 to 41 · score 0.52 · PIP seq, scRNA, RNA seq, Pten MADM, Egfr, genotypes · block
oscr:b:XXM33TH6ZMDHS-A· Report a mismatch - [11] § RESULTS › Single-cell RNA sequencing reveals highly cell type–specific deregulation of gene expression upon loss of Pten and Egfr ↔ scRNA-Seq/biorxiv/scripts/step02_analysis.R, lines 1 to 41 · score 0.50 · PIP seq, scRNA, Pten MADM, sparse, Egfr, genotype · block
oscr:b:XXM33TH6ZMDHS-A· Report a mismatch
Paper
Loaded from Europe PMC by your browser; OSCR does not store it: doi.org · Europe PMC
The paper is loaded when this pane is shown.
The authors' code
R · 570 lines · 27 KB · no license · 4 matches
- # ===============================
- # second step of the analysis
- # analysis of Pten PIP-Seq data
- # ===============================
- library (Seurat)
- library (ggplot2)
- library (dplyr)
- library (data.table)
- library (clusterProfiler)
- library (org.Mm.eg.db)
- library (monocle3)
- library (SeuratWrappers)
- library (openxlsx)
- library (ggbeeswarm)
- library (RColorBrewer)
- library (cowplot)
- base <- "./scRNA-Seq/biorxiv"
- no_save_base <- "./Miranda_et_al_noSave" # folder for large files that are not necessary to backup
- count_base <- paste( base, "PIPSeeker_output/", sep="" ) # folder where PIPSeeker output is located
- set.seed(2401)
- # =========================================================
- # convert sample idx to genotype
- # KO: sparse KO, i.e. green cells in a Pten-MADM
- # DKO: double KO, sparse Pten ko in a Egfr cKO background
- # =========================================================
- conv_vec <- c("KO1", "KO2", "DKO1", "WT1", "KO3", "DKO2", "WT2", "KO4")
- # =================================
- # read raw data and do basic QC
- # and filtering
- # =================================
- seurat_obj_list <- list()
- # for nice plotting order later
- for (sample_idx in c(1:8) ) {
- message( paste("sample", sample_idx, sep=""))
- # we use sensitivity3 analysis option here
- # PIPSeeker pipeline produces a number of outputs - only one used here
- file_path <- paste( count_base, "sample", sample_idx, "/filtered_matrix/sensitivity_3", sep="" )
- message( file_path )
- counts <- Read10X( data.dir = file_path, )
- seurat_obj_list[[ sample_idx ]] <- CreateSeuratObject(counts = counts, project = conv_vec[ sample_idx ], min.cells = 3, min.features = 200)
- }
- # merging objects
- seurat.obj <- merge( x = seurat_obj_list[[ 1 ]], y = seurat_obj_list[ c(2:8) ] )
- message("preparing QC plots")
- # The [[ operator can add columns to object metadata. This is a great place to stash QC stats
- seurat.obj[["percent.mt"]] <- PercentageFeatureSet(seurat.obj, pattern = "^mt-")
- # ==========
- # QC plots
- # ==========
- vln_plot <- VlnPlot(seurat.obj, features = c("nFeature_RNA", "nCount_RNA", "percent.mt"), ncol = 3)
- ggsave( plot=vln_plot, file=paste (base, "/plots/QC/basicFeatures.Vln.raw.pdf", sep=""), width = 10, height = 7)
- message("filtering")
- seurat.obj <- subset(seurat.obj, subset = nFeature_RNA > 500 & nFeature_RNA < 6000 & nCount_RNA < 40000 & percent.mt < 15)
- vln_plot <- VlnPlot(seurat.obj, features = c("nFeature_RNA", "nCount_RNA", "percent.mt"), ncol = 3)
- ggsave( plot=vln_plot, file=paste (base, "/plots/QC/basicFeatures.Vln.filtered.pdf", sep=""), width = 12, height = 5)
- plot1 <- FeatureScatter(seurat.obj, feature1 = "nCount_RNA", feature2 = "percent.mt")
- plot2 <- FeatureScatter(seurat.obj, feature1 = "nCount_RNA", feature2 = "nFeature_RNA")
- QC_plot <- plot1 + plot2
- ggsave( plot=QC_plot, file=paste (base, "/plots/QC/combined.QC.pdf", sep=""), width = 10, height = 7)
- seurat.obj <- NormalizeData(seurat.obj, normalization.method = "LogNormalize", scale.factor = 10000)
- seurat.obj <- FindVariableFeatures(seurat.obj, selection.method = "vst", nfeatures = 2000)
- seurat.obj <- ScaleData(seurat.obj)
- seurat.obj <- RunPCA(seurat.obj, features = VariableFeatures(object = seurat.obj))
- elbowPlot <- ElbowPlot( object = seurat.obj, ndims = 30)
- seurat.obj <- FindNeighbors(seurat.obj, dims = 1:25)
- seurat.obj <- FindClusters(seurat.obj, resolution = 0.3)
- seurat.obj <- RunUMAP(seurat.obj, dims = 1:25)
- # for internal QC: no batch effects visible
- umap_replicates <- DimPlot( seurat.obj, group.by = c("orig.ident"), label=F )
- ggsave( filename = paste(base, "/plots/QC/replicate_umap.pdf", sep=""), plot = umap_replicates, width=5.5, height=5 )
- # for documentation purposes - one cluster will be removed, visualized here
- umap_clusters <- DimPlot( seurat.obj, group.by = c("seurat_clusters"), label=T) + NoLegend()
- ggsave( filename = paste(base, "/plots/QC/cluster_umap.pdf", sep=""), plot = umap_clusters, width=5, height=5 )
- # ====================
- # cluster removal
- # ====================
- seurat.obj <- JoinLayers( seurat.obj )
- # create a variable that is ordered in a convenient way
- [email hidden]$plot_id <- [email hidden]$orig.ident
- [email hidden]$plot_id <- factor( [email hidden]$plot_id, levels = c("WT1", "WT2", "KO1", "KO2", "KO3", "KO4", "DKO1", "DKO2") )
- # identify markers
- # internal QC to rationaize removal of Cluster7
- cluster_markers <- FindAllMarkers( seurat.obj, only.pos = T)
- cluster_markers %>%
- group_by(cluster) %>%
- dplyr::filter(avg_log2FC > 1) %>%
- slice_head(n = 10) %>%
- ungroup() -> top10
- heat_plot <- DoHeatmap( seurat.obj, features = top10$gene ) + NoLegend()
- ggsave( filename = paste(base, "/plots/QC/marker_heatmap.pdf", sep=""), plot = heat_plot, width=8, height=9 )
- # cluster 7 is not well localized and shows very few specific markers
- # remove from analysis
- seurat.obj <- subset(seurat.obj, seurat_clusters %in% c(7), invert=T)
- # ====================
- # QC for Supplement
- # ====================
- # add a factor for nice sample order
- [email hidden]$sampleID <- factor( [email hidden]$orig.ident, levels = c("WT1", "WT2", "KO1", "KO2", "KO3", "KO4", "DKO1", "DKO2") )
- # UMAP for supplement with replicates colored
- umap_replicates <- DimPlot( seurat.obj, group.by = c("sampleID"), label=F)
- ggsave( filename = paste(base, "/plots/Supplement/Sup8E_full_umap_filtered_replicates.pdf", sep=""), plot = umap_replicates, width=6, height=5 )
- # create a genotype variable
- [email hidden]$genotype <- [email hidden]$orig.ident
- [email hidden]$genotype <- sapply( [email hidden]$genotype, function (x) gsub(pattern = "1|2|3|4", replacement = "", x = x))
- # create a color code for genotypes
- color_palette <- c("WT" = "grey50", "DKO" = "cornflowerblue", "KO" = "white" )
- colors <- sapply( unique([email hidden]$genotype), function (x) {
- n_col <- length( unique( [email hidden]$orig.ident[ which([email hidden]$genotype == x) ] ) )
- color_list <- rep( color_palette[[x]], n_col )
- return(color_list)
- })
- # basic QC
- vln_plot <- VlnPlot(seurat.obj, features = c("nFeature_RNA", "nCount_RNA", "percent.mt"), ncol = 3, group.by = "sampleID")
- vln_plot <- vln_plot & scale_fill_manual( values = unlist(colors) )
- ggsave( plot=vln_plot, file=paste (base, "/plots/Supplement/Sup8B-D_basicFeatures.Vln.filtered.pdf", sep=""), width = 12, height = 5)
- # marker expression on UMAP
- marker_plot <- FeaturePlot( seurat.obj, features = c("Dcx", "Neurod1", "Gad2", "Fabp7"), order = T, min.cutoff = "q10" ) & NoLegend()
- ggsave( filename = paste(base, "/plots/Supplement/Sup8F_marker_expression_plots.pdf", sep=""), plot = marker_plot, width=9, height=9 )
- # give useful cell type names
- cluster2celltype <- c("iN", "Neurons", "aIP", "cProg", "oligo", "OBNB", "aIP")
- names( cluster2celltype ) <- c("0", "1", "2", "3", "4", "5", "6")
- [email hidden]$cell_type <- cluster2celltype[ as.character([email hidden]$seurat_clusters) ]
- # plot the cell number per sample
- total_cells <- table( [email hidden]$orig.ident)
- df2plot <- as.data.frame(total_cells)
- df2plot$Var1 <- factor( df2plot$Var1, levels = c("WT1", "WT2", "KO1", "KO2", "KO3", "KO4", "DKO1", "DKO2") )
- df2plot$group <- sapply( df2plot$Var1, function (x) gsub(pattern = "1|2|3|4", replacement = "", x = x))
- df2plot %>%
- group_by( group) %>%
- summarize( mean = mean(Freq), sum = sum(Freq) ) -> av_group
- df2plot$group <- factor( df2plot$group, levels = c("WT", "KO", "DKO") )
- cell_number_plot <- ggplot( df2plot, aes(x=group, y=Freq, fill=group)) +
- geom_bar( data = av_group, aes(x=group, y=mean), stat="identity", color="black") +
- geom_beeswarm( ) + theme_classic() + scale_fill_manual( values = c("WT" = "grey59", "DKO" = "cornflowerblue", "KO" = "white")) +
- ylab( "# of cells" ) + NoLegend()
- ggsave( filename = paste(base, "/plots/Supplement/Sup8A_cell_number_per_sample.pdf", sep=""), plot = cell_number_plot, width=3, height=5 )
- # write out the raw data for this plot
- wb <- createWorkbook()
- tmp <- df2plot
- sheetName <- "raw data point Fig5K"
- addWorksheet(wb, sheetName)
- writeData(wb, sheetName, tmp)
- addFilter(wb, sheetName, row = 1, cols = 1:ncol(tmp))
- setColWidths(wb, sheetName, cols = 1:ncol(tmp), widths="auto")
- tmp <- av_group
- sheetName <- "averages Fig5K"
- addWorksheet(wb, sheetName)
- writeData(wb, sheetName, tmp)
- addFilter(wb, sheetName, row = 1, cols = 1:ncol(tmp))
- setColWidths(wb, sheetName, cols = 1:ncol(tmp), widths="auto")
- saveWorkbook(wb, file = paste(base, "Supplement/Sup8A_data.xlsx", sep="/"), overwrite = T)
- # ==========================================================
- # cell type analysis
- # ==========================================================
- [email hidden]$super_group <- "proj_neuron"
- [email hidden]$super_group[ which( ![email hidden]$cell_type %in% c("Neurons", "iN")) ] <- "non_proj_neuron"
- plot2 <- DimPlot( seurat.obj, group.by = "super_group", label=T ) + NoLegend()
- ggsave( filename = paste(base, "/plots/Supplement/Sup8G_broad_cluster_umap.pdf", sep=""), plot = plot2, width=6, height=5 )
- # ================================
- # focus analysis on glia/OBNB
- # ================================
- Idents(seurat.obj) <- "cell_type"
- seurat_glia <- subset( seurat.obj, idents = c("aIP", "cProg", "OBNB", "oligo"))
- # remove all old analyses
- seurat_glia@assays$RNA$data <- NULL
- seurat_glia@assays$RNA$scale.data <- NULL
- seurat_glia@reductions$pca <- NULL
- seurat_glia@reductions$umap <- NULL
- seurat_glia <- NormalizeData(seurat_glia, normalization.method = "LogNormalize", scale.factor = 10000)
- seurat_glia <- FindVariableFeatures(seurat_glia, selection.method = "vst", nfeatures = 4000)
- # partially regress out cell cycle effects
- cell_cycle_phase_gene <- read.table(file = paste(base, "other_data/Mus_musculus.csv", sep=""), sep = ",", header = T)
- gene_conversion <- bitr(geneID = cell_cycle_phase_gene$geneID, fromType = "ENSEMBL", toType = "SYMBOL", OrgDb = org.Mm.eg.db)
- cell_cycle_phase_gene <- merge(cell_cycle_phase_gene, gene_conversion, by.x="geneID", by.y="ENSEMBL")
- seurat_glia <- CellCycleScoring (
- object = seurat_glia,
- g2m.features = cell_cycle_phase_gene[which(cell_cycle_phase_gene$phase == "G2/M"), "SYMBOL"],
- s.features = cell_cycle_phase_gene[which(cell_cycle_phase_gene$phase == "S"), "SYMBOL"]
- )
- seurat_glia$CC.Difference <- seurat_glia$S.Score - seurat_glia$G2M.Score
- all.genes <- rownames(seurat_glia)
- seurat_glia <- ScaleData(seurat_glia, vars.to.regress = c("CC.Difference") )
- seurat_glia <- RunPCA(seurat_glia, features = VariableFeatures(object = seurat_glia))
- elbowPlot <- ElbowPlot( object = seurat_glia, ndims = 30)
- seurat_glia <- FindNeighbors(seurat_glia, dims = 1:15)
- seurat_glia <- FindClusters(seurat_glia, resolution = 0.5)
- seurat_glia <- RunUMAP(seurat_glia, dims = 1:15)
- [email hidden]$gen2plot <- factor( [email hidden]$genotype, levels = c("WT", "KO", "DKO") )
- umap_df <- as.data.frame( Embeddings( object = seurat_glia, reduction = "umap") )
- umap_df$genotype <- seurat_glia$genotype
- umap_df$genotype <- factor( umap_df$genotype, levels = c("WT", "KO", "DKO") )
- ggplot( ) +
- geom_point(data = umap_df[ which(umap_df$genotype == "KO"), ], aes(x=umap_1, y=umap_2, fill = genotype), shape=21) +
- geom_point(data = umap_df[ which(umap_df$genotype == "DKO"), ], aes(x=umap_1, y=umap_2, fill = genotype), shape=21) +
- geom_point(data = umap_df[ which(umap_df$genotype == "WT"), ], aes(x=umap_1, y=umap_2, fill = genotype), shape=21) +
- scale_fill_manual( values = c("WT" = "grey10", "DKO" = "cornflowerblue", "KO" = "white") ) +
- theme_classic()
- ggsave( filename = paste(base, "/plots/QC/glia_umap_genotype.pdf", sep=""), width=6, height=5 )
- FeaturePlot( seurat_glia, features = c("Cdk1", "Mki67", "Gad2", "Dlx5", "Pdgfra", "Cspg4", "Aldh1l1", "Aldoc", "Gfap"), order = T, min.cutoff = "q15" ) & NoLegend()
- ggsave( filename = paste(base, "/plots/Supplement/Sup8H_glia_umap_marker_expression.pdf", sep=""), width=9, height=9 )
- ###
- # refine cell type annotation
- ###
- cluster2cellType <- c("cProg", "aIP", "iA", "iA", "iA", "iA", "oligo", "oligo", "OBNB")
- names(cluster2cellType) <- as.character( c(0, 1, 2, 5, 7, 8, 4, 6, 3) )
- [email hidden]$cell_type <- cluster2cellType[ as.character(seurat_glia$seurat_clusters) ]
- # sanity check for cell type assignment
- VlnPlot( seurat_glia, features = c( "Mki67", "Aldh1l1", "Gad2", "Pdgfra" ), group.by = "cell_type", ncol = 4)
- ggsave( filename = paste(base, "/plots/QC/marker_expression_glia.png", sep=""), width=8, height=3 )
- # figure plots
- DimPlot( seurat_glia, group.by = c("cell_type", "Phase"), split.by = "gen2plot", label=F, label.size = 6)
- ggsave( filename = paste(base, "/plots/Supplement/Sup8I_glia_umap_cellTypes.pdf", sep=""), width=9, height=8 )
- DimPlot( seurat_glia, group.by = "cell_type", label=F)
- ggsave( filename = paste(base, "/plots/main/Fig5B_umap.pdf", sep=""), width=6, height=5 )
- # ======================
- # trajectory analysis
- # ======================
- cds <- as.cell_data_set( seurat_glia )
- cds <- cluster_cells(cds)
- cds <- learn_graph(cds)
- cds <- order_cells(cds)
- cds@colData$cell_type <- cluster2cellType[ as.character(cds@colData$seurat_clusters) ]
- traj_plot_ct <- list()
- for (gen in c("WT", "KO", "DKO")) {
- traj_plot_ct[[ gen ]] <- plot_cells(cds[,rownames(cds@colData)[ which( cds@colData$genotype == gen ) ]], label_groups_by_cluster = FALSE, label_cell_groups = FALSE, cell_size = 1.5,
- label_leaves = FALSE, label_branch_points = FALSE, label_roots = FALSE,
- color_cells_by = "cell_type", group_label_size = 5, trajectory_graph_segment_size = 3)
- traj_plot_ct[[ gen ]] <- traj_plot_ct[[ gen ]] + ggtitle( gen )
- }
- traj_plot <- plot_grid( plotlist = traj_plot_ct, ncol = 3 )
- ggsave ( traj_plot, filename = paste(base, "plots/QC/glia_traj_plot_genotypes.pdf", sep=""), width=15, height=5)
- traj_plot_main <- plot_cells(cds, label_groups_by_cluster = FALSE, label_cell_groups = FALSE, cell_size = 1.5,
- label_leaves = FALSE, label_branch_points = FALSE, label_roots = FALSE,
- color_cells_by = "cell_type", group_label_size = 5, trajectory_graph_segment_size = 3)
- ggsave( plot = traj_plot_main, filename = paste(base, "/plots/main/Fig5C_traj_plot.pdf", sep=""), width=6, height=5 )
- # analyse abundance changes of non projection neuron cell types
- [email hidden] %>%
- group_by( orig.ident, cell_type ) %>%
- summarize( n = n()) -> cluster_count
- cluster_count$genotype <- sapply( cluster_count$orig.ident, function (x) gsub(pattern = "1|2|3|4", replacement = "", x = x))
- cluster_count$total <- total_cells[ cluster_count$orig.ident ]
- cluster_count$rel <- cluster_count$n / cluster_count$total
- cluster_count %>%
- group_by( genotype, cell_type ) %>%
- summarize( mean = median(rel), sd = sd(rel)) -> cluster_count_comb
- plot1 <- ggplot() +
- geom_bar( data = cluster_count_comb, aes( x=genotype, y=mean ), stat="identity", position="dodge", fill="white", color="black") +
- #geom_errorbar( data = cluster_count_comb, aes(x=genotype, ymin = mean-sd, ymax=mean+sd)) +
- geom_beeswarm( data = cluster_count, aes( x=genotype, y=rel ) ) +
- facet_wrap( ~ cell_type, scales = "free_y" ) + theme_classic()
- ggsave ( filename = paste(base, "plots/QC/glia_cellTypes_abundance.pdf", sep=""), plot = plot1, width=6, height=4)
- # arcsin transformation
- cluster_count$asin_rel <- asin(sqrt( cluster_count$rel ))
- anova <- aov( asin_rel ~ cell_type*genotype, data = cluster_count)
- summary(anova)
- # Df Sum Sq Mean Sq F value Pr(>F)
- # cell_type 4 0.07032 0.01758 5.685 0.002140 **
- # genotype 2 0.07629 0.03814 12.334 0.000188 ***
- # cell_type:genotype 8 0.04767 0.00596 1.927 0.100383
- # Residuals 25 0.07731 0.00309
- # ---
- # Signif. codes: 0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1
- # do a chisquare analysis of pooled relative abundances
- # due to the variation in the cell number direct comparisons might be less powerful
- # much more sensitive than the anova with multiple testing
- # do all pairwise comparisons
- pvalues <- data.frame()
- for (cell_type in unique(cluster_count$cell_type)) {
- tmp <- cluster_count[which(cluster_count$cell_type == cell_type),]
- tmp %>%
- group_by( genotype ) %>%
- summarize( sum_n = sum( n ), sum_total = sum( total ) ) -> tmp_comb
- ctrl_idx <- which(tmp_comb$genotype == "WT")
- for (genotype in c("KO", "DKO")) {
- idx <- which(tmp_comb$genotype == genotype)
- tmp_table <- as.table( rbind( c(as.numeric ( tmp_comb[ctrl_idx, "sum_n"] ) , as.numeric ( tmp_comb[ctrl_idx, "sum_total"] - tmp_comb[ctrl_idx, "sum_n"]) ),
- c(as.numeric ( tmp_comb[idx, "sum_n"] ), as.numeric ( tmp_comb[idx, "sum_total"] - tmp_comb[idx, "sum_n"] ) ) )
- )
- chisq_out <- chisq.test( tmp_table, correct = T, rescale.p = F, simulate.p.value = F )
- tmp_comb$rel <- tmp_comb$sum_n / tmp_comb$sum_total
- tmp_comb <- as.data.frame( tmp_comb )
- rownames(tmp_comb) <- tmp_comb$genotype
- dir_change <- tmp_comb[ genotype, "rel"] / tmp_comb[ "WT", "rel"]
- if (dir_change > 1) {
- dir_change <- "pos"
- } else {
- dir_change <- "neg"
- }
- pvalues <- rbind( pvalues, data.frame(cluster = cell_type, genotype = genotype,
- abs_genotype = tmp_comb[ genotype, "sum_n"], rel_genotype = tmp_comb[ genotype, "rel"],
- abs_wt = tmp_comb[ genotype, "sum_total"], rel_wt = tmp_comb[ "WT", "rel"],
- pvalue = chisq_out$p.value, dir = dir_change ) )
- }
- }
- pvalues$p.adjust <- p.adjust( pvalues$pvalue, method = "bonferroni" )
- pvalues$sig_stars <- sapply( pvalues$p.adjust, function (x) ifelse(x<0.05, "*", ""))
- pvalues$score <- log10(pvalues$p.adjust) * -1
- pvalues$score[ which(pvalues$score > 5 )] <- 5
- pvalues$score[ which( pvalues$dir == "neg") ] <- pvalues$score[ which( pvalues$dir == "neg") ] * -1
- # main figure heatmap
- ggplot( pvalues, aes(x=genotype, y=cluster, fill=dir, label=sig_stars)) + geom_tile( color = "black" ) +
- geom_text( size = 15) + scale_fill_manual( values = c( "neg" = "cornflowerblue", "pos" = "yellow" ) ) +
- theme_classic() + ylab( "cell type" )
- ggsave ( filename = paste(base, "/plots/main/Fig5D_abundance_change_p_plot.pdf", sep=""), width=4, height=4)
- # save analyses to sup exel sheet
- # save this analysis as exel
- wb <- createWorkbook()
- tmp <- pvalues
- sheetName <- "raw data Figure 5D"
- addWorksheet(wb, sheetName)
- writeData(wb, sheetName, tmp)
- addFilter(wb, sheetName, row = 1, cols = 1:ncol(tmp))
- setColWidths(wb, sheetName, cols = 1:ncol(tmp), widths="auto")
- saveWorkbook(wb, file = paste(base, "Supplement/Fig5D_rel_abundance_analysis.xlsx", sep="/"), overwrite = T)
- # ===========================================
- # DEG analysis
- # with MAST in preparation of iDEA analysis
- # ===========================================
- de_res <- list()
- cell_count <- list()
- comp <- list()
- comp[[ 1 ]] <- c("KO", "WT")
- comp[[ 2 ]] <- c("DKO", "WT")
- comp[[ 3 ]] <- c("DKO", "KO")
- Idents( seurat_glia ) <- 'genotype'
- for ( idx in c(1:3) ) {
- # give a descriptor to the analysis
- del_gen <- paste(comp [[ idx ]], collapse = "_")
- de_res[[del_gen]] <- list()
- cell_count[[del_gen]] <- list()
- test_diff <- subset(x = seurat_glia, idents = c( comp[[ idx ]][1], comp[[ idx ]][2]), invert = FALSE)
- for ( i in unique( seurat_glia$cell_type ) ) {
- message( del_gen, " ", i )
- Idents(test_diff) <- "cell_type"
- test_diff_cluster <- subset(x = test_diff, idents = i, invert = FALSE)
- Idents(test_diff_cluster) <- 'genotype'
- #testing for DE genes
- cell_count[[del_gen]][[i]] <- table(Idents(test_diff_cluster))
- #remove clusters with less than 9 cells
- if(cell_count[[del_gen]][[i]][1] > 9 & cell_count[[del_gen]][[i]][2] > 9) {
- de_res[[del_gen]][[i]] <- FindMarkers(test_diff_cluster, ident.1 = comp[[ idx ]][1], ident.2 = comp[[ idx ]][2], test.use = 'MAST', logfc.threshold = 0.01, assay = "RNA", slot = "data")
- } else {
- de_res[[del_gen]][[i]] <- NA
- }
- }
- }
- #write out DEGs - as Supplement
- wb <- createWorkbook()
- for (del_gen in names(de_res)) {
- for (comp in names(de_res[[del_gen]])) {
- if (!any(is.na(de_res[[del_gen]][[comp]]))) {
- tmp <- de_res[[del_gen]][[comp]]
- tmp$gene <- rownames(tmp)
- # modify cluster names to be compatible with EXEL tab naming conventions
- sheet_name_comp <- strsplit(x = comp, split = "\\ ")[[1]]
- sheet_name_comp <- sapply(sheet_name_comp, function (x) gsub(pattern = "\\(|\\)|\\[|\\]|-", replacement = "", x = x))
- sheet_name_comp <- paste(sheet_name_comp, collapse="_")
- sheetName <- paste(del_gen, sheet_name_comp, sep='_')
- addWorksheet(wb, sheetName)
- writeData(wb, sheetName, tmp)
- addFilter(wb, sheetName, row = 1, cols = 1:ncol(tmp))
- setColWidths(wb, sheetName, cols = 1:ncol(tmp), widths="auto")
- }
- }
- }
- saveWorkbook(wb, file = paste(base, "Supplement/DEG.analysis_MAST.xlsx", sep="/"), overwrite = T)
- # prepare a list suitable for iDEA
- de_res <- list()
- comparisons <- getSheetNames( paste(base, "Supplement/DEG.analysis_MAST.xlsx", sep="/") )
- for (comp in comparisons) {
- comp_parts <- strsplit(x = comp, split = "_")[[1]]
- if (length(comp_parts) == 3) {
- comp_parts[1] <- paste(comp_parts[1], comp_parts[2], sep='_')
- comp_parts[2] <- comp_parts[3]
- }
- if (length(de_res[[comp_parts[1]]]) == 0) {
- de_res[[comp_parts[1]]] <- list()
- }
- de_res[[comp_parts[1]]][[comp_parts[2]]] <- read.xlsx( xlsxFile = paste(base, "Supplement/DEG.analysis_MAST.xlsx", sep="/"), sheet = comp)
- }
- saveRDS(object = de_res, file = paste(base, "/iDEA_analysis/DEG_iDEA.RDS", sep = ""))
- sessionInfo()
- # R version 4.3.2 (2023-10-31)
- # Platform: x86_64-pc-linux-gnu (64-bit)
- # Running under: Ubuntu 22.04.5 LTS
- #
- # Matrix products: default
- # BLAS: /opt/R/4.3.2/lib/R/lib/libRblas.so
- # LAPACK: /usr/lib/x86_64-linux-gnu/lapack/liblapack.so.3.10.0
- #
- # locale:
- # [1] LC_CTYPE=en_GB.UTF-8 LC_NUMERIC=C LC_TIME=de_AT.UTF-8 LC_COLLATE=en_GB.UTF-8 LC_MONETARY=de_AT.UTF-8 LC_MESSAGES=en_GB.UTF-8
- # [7] LC_PAPER=de_AT.UTF-8 LC_NAME=C LC_ADDRESS=C LC_TELEPHONE=C LC_MEASUREMENT=de_AT.UTF-8 LC_IDENTIFICATION=C
- #
- # time zone: Europe/Vienna
- # tzcode source: system (glibc)
- #
- # attached base packages:
- # [1] stats4 stats graphics grDevices utils datasets methods base
- #
- # other attached packages:
- # [1] shiny_1.8.0 openxlsx_4.2.5.2 SeuratWrappers_0.3.5 monocle3_1.3.7 SingleCellExperiment_1.24.0 SummarizedExperiment_1.32.0
- # [7] GenomicRanges_1.54.1 GenomeInfoDb_1.38.8 MatrixGenerics_1.14.0 matrixStats_1.2.0 org.Mm.eg.db_3.18.0 AnnotationDbi_1.64.1
- # [13] IRanges_2.36.0 S4Vectors_0.40.2 Biobase_2.62.0 BiocGenerics_0.48.1 clusterProfiler_4.10.1 data.table_1.15.0
- # [19] dplyr_1.1.4 ggplot2_3.5.0 Seurat_5.0.1 SeuratObject_5.0.1 sp_2.1-3
- #
- # loaded via a namespace (and not attached):
- # [1] fs_1.6.3 spatstat.sparse_3.0-3 bitops_1.0-7 enrichplot_1.22.0 HDO.db_0.99.1 httr_1.4.7 RColorBrewer_1.1-3
- # [8] tools_4.3.2 sctransform_0.4.1 utf8_1.2.4 R6_2.5.1 lazyeval_0.2.2 uwot_0.1.16 withr_3.0.0
- # [15] prettyunits_1.2.0 gridExtra_2.3 progressr_0.14.0 textshaping_0.3.7 cli_3.6.2 spatstat.explore_3.2-6 fastDummies_1.7.3
- # [22] scatterpie_0.2.2 sass_0.4.8 labeling_0.4.3 spatstat.data_3.0-4 proxy_0.4-27 ggridges_0.5.6 pbapply_1.7-2
- # [29] systemfonts_1.0.6 yulab.utils_0.1.4 gson_0.1.0 DOSE_3.28.2 R.utils_2.12.3 parallelly_1.37.0 limma_3.58.1
- # [36] rstudioapi_0.16.0 RSQLite_2.3.6 generics_0.1.3 gridGraphics_0.5-1 ica_1.0-3 spatstat.random_3.2-2 zip_2.3.1
- # [43] GO.db_3.18.0 Matrix_1.6-5 ggbeeswarm_0.7.2 fansi_1.0.6 abind_1.4-5 R.methodsS3_1.8.2 lifecycle_1.0.4
- # [50] qvalue_2.34.0 SparseArray_1.2.4 Rtsne_0.17 grid_4.3.2 blob_1.2.4 promises_1.2.1 crayon_1.5.2
- # [57] miniUI_0.1.1.1 lattice_0.21-9 cowplot_1.1.3 KEGGREST_1.42.0 pillar_1.9.0 fgsea_1.28.0 boot_1.3-28.1
- # [64] future.apply_1.11.1 codetools_0.2-19 fastmatch_1.1-4 leiden_0.4.3.1 glue_1.7.0 packrat_0.9.2 leidenbase_0.1.27
- # [71] ggfun_0.1.4 remotes_2.5.0 vctrs_0.6.5 png_0.1-8 treeio_1.26.0 spam_2.10-0 gtable_0.3.4
- # [78] assertthat_0.2.1 cachem_1.0.8 S4Arrays_1.2.1 mime_0.12 tidygraph_1.3.1 survival_3.5-7 statmod_1.5.0
- # [85] ellipsis_0.3.2 fitdistrplus_1.1-11 ROCR_1.0-11 nlme_3.1-163 ggtree_3.10.1 bit64_4.0.5 progress_1.2.3
- # [92] RcppAnnoy_0.0.22 bslib_0.6.1 irlba_2.3.5.1 vipor_0.4.7 KernSmooth_2.23-22 colorspace_2.1-0 DBI_1.2.2
- # [99] ggrastr_1.0.2 tidyselect_1.2.1 bit_4.0.5 compiler_4.3.2 DelayedArray_0.28.0 plotly_4.10.4 shadowtext_0.1.3
- # [106] scales_1.3.0 lmtest_0.9-40 stringr_1.5.1 digest_0.6.34 goftest_1.2-3 presto_1.0.0 spatstat.utils_3.1-0
- # [113] minqa_1.2.6 XVector_0.42.0 htmltools_0.5.7 pkgconfig_2.0.3 lme4_1.1-35.3 fastmap_1.1.1 rlang_1.1.3
- # [120] htmlwidgets_1.6.4 jquerylib_0.1.4 farver_2.1.1 zoo_1.8-12 jsonlite_1.8.8 BiocParallel_1.36.0 GOSemSim_2.28.1
- # [127] R.oo_1.26.0 RCurl_1.98-1.14 magrittr_2.0.3 GenomeInfoDbData_1.2.11 ggplotify_0.1.2 dotCall64_1.1-1 patchwork_1.2.0
- # [134] munsell_0.5.0 Rcpp_1.0.12 ape_5.8 viridis_0.6.5 reticulate_1.35.0 stringi_1.8.3 ggraph_2.2.1
- # [141] zlibbioc_1.48.2 MASS_7.3-60 MAST_1.28.0 plyr_1.8.9 parallel_4.3.2 listenv_0.9.1 ggrepel_0.9.5
- # [148] deldir_2.0-2 Biostrings_2.70.3 graphlayouts_1.1.1 splines_4.3.2 tensor_1.5 hms_1.1.3 igraph_2.0.2
- # [155] spatstat.geom_3.2-8 RcppHNSW_0.6.0 reshape2_1.4.4 BiocManager_1.30.22 nloptr_2.0.3 tweenr_2.0.3 httpuv_1.6.14
- # [162] RANN_2.6.1 tidyr_1.3.1 purrr_1.0.2 polyclip_1.10-6 future_1.33.1 scattermore_1.2 ggforce_0.4.2
- # [169] rsvd_1.0.5 xtable_1.8-4 RSpectra_0.16-1 tidytree_0.4.6 later_1.3.2 viridisLite_0.4.2 ragg_1.3.0
- # [176] tibble_3.2.1 aplot_0.2.2 memoise_2.0.1 beeswarm_0.4.0 cluster_2.1.4 globals_0.16.2
step02_analysis.R at commit bfad256, no license · at the source
Overview
- Institute of Science and Technology Austria, Am Campus 1, 3400 Klosterneuburg, Austria
- Institut du Cerveau-Paris Brain Institute (ICM), Sorbonne Universite, Inserm, CNRS, Hopital Pitie-Salpetriere, Paris, France
- Section of Comparative Medicine, Yale School of Medicine, New Haven, CT 06520, USA
- Institute of Laboratory Animal Science, University of Veterinary Medicine Vienna, Vienna, Austria
Abstract
The cerebral cortex consists of immense numbers of diverse cell types derived from radial glial progenitor (RGP) cells. How RGPs generate appropriate quantities of distinct cell types to safeguard a brain of correct size is not well understood. However, genetic aberrations in human, including mutations in PTEN, lead to cortical malformation such as macrocephaly, albeit with unknown etiology. Here, we used mosaic analysis with double markers (MADM)–based clonal analysis and single-cell phenotyping to decipher the role of Pten in RGP lineage progression during cortical ontogeny. Although neurogenic RGP lineage progression was altered and projection neuron production doubled in the absence of Pten, cortical astrogenesis was drastically increased. Through epistasis experiments, we show that the loss of Pten uncouples astrogenesis from essential growth factor signaling hubs, funneling into MAPK (mitogen-activated protein kinase). Collectively, our results suggest that Pten regulates RGP lineage progression with distinct sequential functions in corticogenesis to safeguard the emergence of a correctly sized cortex.
Reproduced under the paper's license (CC BY), from the paper cited above.
Repositories
Its files are read in the Code ↔ Paper reader above, with 11 matches between paragraphs and lines of code.
fpauler/Role-of-Pten-in-RGP-Lineage-Progression
bfad256e5d384636e1dddd6f835477116ad3babe, 30 September 2026Availability: 1 check, the latest on 21 November 2026: the link answers
- 21 November 2026: the link answers
12 files
- bulk_RNASeq/
biorxiv/ , Perl, 20 linesSTAR_counts/ del_count/ count_reads.pl - bulk_RNASeq/
biorxiv/ , R, 557 lines, 2 matchesscripts/ astro_DE_analysis.v6.R - bulk_RNASeq/
final/ , R, 362 linesscripts/ deconvolution.R - scRNA-Seq/
biorxiv/ , Shell, 8 linesPIPSeeker_output/ pipseeker_run_info/ run_pipseeker.sh - scRNA-Seq/
biorxiv/ , R, 87 linesiDEA_analysis/ iDEA.analysis.cl.R - scRNA-Seq/
biorxiv/ , Shell, 10 linesiDEA_analysis/ run_idea.sh - scRNA-Seq/
biorxiv/ , R, 125 linesscripts/ step01_prepare_GO_iDEA.R - scRNA-Seq/
biorxiv/ , R, 570 lines, 4 matchesscripts/ step02_analysis.R - scRNA-Seq/
biorxiv/ , R, 412 lines, 1 matchscripts/ step03_post_iDEA_analysi s.R - scRNA-Seq/
final/ , R, 1,123 lines, 2 matchesscripts/ step02_analysis.R - scRNA-Seq/
final/ , R, 468 lines, 2 matchesscripts/ step03_post_iDEA_analysi s.R - readme.md, Text, 36 lines
Zenodo 23054365
Availability: 1 check, the latest on 21 November 2026: the link answers (HTTP 200)
- 21 November 2026: the link answers (HTTP 200)
12 files
- bulk_RNASeq/
biorxiv/ , Perl, 20 linesSTAR_counts/ del_count/ count_reads.pl - bulk_RNASeq/
biorxiv/ , R, 557 linesscripts/ astro_DE_analysis.v6.R - bulk_RNASeq/
final/ , R, 362 linesscripts/ deconvolution.R - scRNA-Seq/
biorxiv/ , Shell, 8 linesPIPSeeker_output/ pipseeker_run_info/ run_pipseeker.sh - scRNA-Seq/
biorxiv/ , R, 87 linesiDEA_analysis/ iDEA.analysis.cl.R - scRNA-Seq/
biorxiv/ , Shell, 10 linesiDEA_analysis/ run_idea.sh - scRNA-Seq/
biorxiv/ , R, 125 linesscripts/ step01_prepare_GO_iDEA.R - scRNA-Seq/
biorxiv/ , R, 570 linesscripts/ step02_analysis.R - scRNA-Seq/
biorxiv/ , R, 412 linesscripts/ step03_post_iDEA_analysi s.R - scRNA-Seq/
final/ , R, 1,123 linesscripts/ step02_analysis.R - scRNA-Seq/
final/ , R, 468 linesscripts/ step03_post_iDEA_analysi s.R - readme.md, Text, 36 lines
The paper's code and data availability statement is in the Data section.
Tracing map
Proposed by the machine: these links were found in the paper and verified at the source, without human review. The map will receive a Zenodo DOI once one of the paper's authors has validated it with their ORCID.
What the map holds:
- 2 repositories of the authors' code, each at its verified commit, with its license and how the link was found in the paper;
- 22 scripts, each with its path and the digest of its content;
- 11 matches between paragraphs of the paper and lines of the code (method lexical-v1);
- neither the text of the paper nor the code itself.
Its JSON (tracing-map.json) is deposited on Zenodo with its DOI once the map is validated.
Data
Datasets cited
- geo:GSE316544, at NCBI GEO; found in “Data, code, and materials availability:”
Data, code, and materials availability
All published reagents and mouse lines will be shared upon request within the limits of the respective material transfer agreements. The Jak1-floxed and Jak2-floxed mice used to generate MADM mice in this study can be provided by K.-U. Wagner pending scientific review and a completed material transfer agreement through the Wayne State University. Requests for those mice should be submitted to . All data and code needed to evaluate and reproduce the results in the paper are present in the paper and/
Reproduced under the paper's license (CC BY), from the paper cited above.
Versions
The history of this record: each version stored by the harvester or made by a correction of its authors or of the maintainers of its code, and what changed in its facts. The texts of the paper (its abstract, its availability statements) are not part of it; versions that changed only those are not listed.
Version 1, 21 November 2026: the first record
Recorded: type, language, journal, volume, issue, pages, dates, 13 authors, 13 MeSH terms, 6 funders, 106 references.
Cite
This paper
Miranda, O. A., Contreras, X., Pauler, F. M., Davaatseren, A., Amberg, N., Streicher, C., Villalba, A., Chen, Y., Heger, A., Marie, C., Hassan, B. A., Rülicke, T., & Hippenmeyer, S. (2026). &
BibTeX
@article{miranda2026lt,
author = {Miranda, Osvaldo A and Contreras, Ximena and Pauler, Florian M and Davaatseren, Amarbayasgalan and Amberg, Nicole and Streicher, Carmen and Villalba, Ana and Chen, Yuwei and Heger, Anna and Marie, Corentine and Hassan, Bassem A and Rülicke, Thomas and Hippenmeyer, Simon},
title = {{\&
journal = {Science advances},
year = {2026},
month = nov,
volume = {12},
number = {47},
pages = {eaeh1717},
publisher = {American Association for the Advancement of Science},
issn = {2375-2548},
doi = {10.1126/
url = {https://
pmid = {43050529},
pmcid = {PMC13781122}
}
RIS
TY - JOUR
AU - Miranda, Osvaldo A
AU - Contreras, Ximena
AU - Pauler, Florian M
AU - Davaatseren, Amarbayasgalan
AU - Amberg, Nicole
AU - Streicher, Carmen
AU - Villalba, Ana
AU - Chen, Yuwei
AU - Heger, Anna
AU - Marie, Corentine
AU - Hassan, Bassem A
AU - Rülicke, Thomas
AU - Hippenmeyer, Simon
TI - &
T2 - Science advances
J2 - Sci Adv
PY - 2026
DA - 2026/
VL - 12
IS - 47
SP - eaeh1717
SN - 2375-2548
PB - American Association for the Advancement of Science
DO - 10.1126/
UR - https://
LA - en
ER -
CSL-JSON
{
"id": "10.1126/
"type": "article-journal",
"title": "&
"container-title": "Science advances",
"author": [
{
"family": "Miranda",
"given": "Osvaldo A"
},
{
"family": "Contreras",
"given": "Ximena"
},
{
"family": "Pauler",
"given": "Florian M"
},
{
"family": "Davaatseren",
"given": "Amarbayasgalan"
},
{
"family": "Amberg",
"given": "Nicole"
},
{
"family": "Streicher",
"given": "Carmen"
},
{
"family": "Villalba",
"given": "Ana"
},
{
"family": "Chen",
"given": "Yuwei"
},
{
"family": "Heger",
"given": "Anna"
},
{
"family": "Marie",
"given": "Corentine"
},
{
"family": "Hassan",
"given": "Bassem A"
},
{
"family": "Rülicke",
"given": "Thomas"
},
{
"family": "Hippenmeyer",
"given": "Simon"
}
],
"container-title-short":
"volume": "12",
"issue": "47",
"page": "eaeh1717",
"DOI": "10.1126/
"PMID": "43050529",
"PMCID": "PMC13781122",
"ISSN": "2375-2548",
"publisher": "American Association for the Advancement of Science",
"URL": "https://
"language": "en",
"issued": {
"date-parts": [
[
2026,
11,
18
]
]
}
}
The tracing map gets a citation of its own once an author has validated it and it has a DOI.
Similar papers
The papers with a page that share the most with this one: the tools found in their code, their categories, datasets, cited references and authors, the rarest counting most.
- [1] doi:10.1126/sciadv.abq1263
- Tissue-wide genetic and cellular landscape shapes the execution of sequential PRC2 functions in neural stem cell lineage progression.Journal: Science advancesIn common: 21 references, 3 authors
- [2] doi:10.1126/sciadv.adw5487 [code]
- Early fate diversification of radial glial progenitors during corticogenesis.Journal: Science advancesIn common: Monocle 3, SingleCellExperiment, Seurat, 2 other tools, mouse, 14 references, 2 authors
- [3] doi:10.1016/j.xpro.2024.103168 [code]
- Protocol for mapping cell lineage and cell-type identity of clonally-related cells in situ using MADM-CloneSeq.Journal: STAR protocolsIn common: Monocle 3, SingleCellExperiment, clusterProfiler, 7 other tools, mouse, cellular / molecular, 7 references, author Simon Hippenmeyer
- [4] doi:10.1038/s44318-026-00806-z [code]
- Interspecific diversity in the neuronal composition of the mammalian cortex arises from heterochrony in neurogenesis.Journal: The EMBO journalIn common: Monocle 3, SingleCellExperiment, clusterProfiler, 9 other tools, 5 references
- [5] doi:10.1371/journal.pbio.3001563 [code]
- Pax6 limits the competence of developing cerebral cortical cells to respond to inductive intercellular signals.Journal: PLoS biologyIn common: Monocle 3, SingleCellExperiment, DESeq2, 7 other tools, 6 references
- [6] doi:10.1093/oons/kvac009 [code]
- Tissue-Wide Effects Override Cell-Intrinsic Gene Function in Radial Neuron Migration.Journal: Oxford open neuroscienceIn common: cellular / molecular, 9 references, author Simon Hippenmeyer
- [7] doi:10.1016/j.isci.2023.106242
- Bulk and mosaic deletions of <i>Egfr</
i> reveal regionally defined gliogenesis in the developing mouse forebrain. Journal: iScienceIn common: mouse, 12 references - [8] doi:10.1038/s41586-026-10214-2 [code]
- Multidimensional profiling of heterogeneity in supratentorial ependymomas.Journal: NatureIn common: Monocle 3, SingleCellExperiment, clusterProfiler, 9 other tools, mouse, 1 reference
- [9] doi:10.1186/s40478-023-01568-z [code]
- Brain matters: unveiling the distinct contributions of region, age, and sex to glia diversity and CNS function.Journal: Acta neuropathologica communicationsIn common: Monocle 3, SingleCellExperiment, clusterProfiler, 8 other tools, mouse, cellular / molecular, 2 references
- [10] doi:10.1126/sciadv.adn9998 [code]
- Multiple parallel cell lineages in the developing mammalian cerebral cortex.Journal: Science advancesIn common: igraph, pheatmap, Seurat, 4 other tools, mouse, 6 references
Contribute
The authors of this paper can claim it, correct its record and validate its tracing map, and the maintainers of its code (its owner, or a public member of its organization) correct what it says of their repository; anyone signed in can ask for its removal. Every request goes to OSCR's own machine, which answers it; your account page follows them.
Sign in with ORCID to claim this paper as one of its authors, correct its record or validate its tracing map: when the paper's metadata lists your ORCID iD, you are recognized at once. Maintainers of its code: sign in with GitHub, then claim the repository on your account page.
Claim this paper
Correct its record
Say what each link of this record is, remove the ones that are not the paper's, add the ones that are missing. The correction becomes a new version of the record, in its Versions section.
Validate its tracing map
You validate the map as this page shows it: 2 repositories of the authors' code, each at its verified commit and with its license, 22 scripts, and 11 matches between paragraphs and code (see the Code and Map sections). It then receives a DOI on Zenodo, with you (your ORCID iD) and OSCR as its creators; the code itself is not deposited.
The map's fingerprint: sha256:0860e622ca8698ee…
Add the badge to the code's README
If you are an author or a maintainer of this paper's code, you can add this badge. It says what OSCR knows of the paper (its code, its validated tracing map) and links the code to this page. Paste one of these snippets under the README's title. Keep the two marks around it, so that the badge can be replaced in place and is never added twice. OSCR changes nothing in your repository.
Markdown
<!-- oscr-badge:start -->
[](https://openscicode.org/badge/doi/10.1126/sciadv.aeh1717)
<!-- oscr-badge:end -->reStructuredText
.. oscr-badge:start
.. image:: https://openscicode.org/badge/doi/10.1126/sciadv.aeh1717.svg
:target: https://openscicode.org/badge/doi/10.1126/sciadv.aeh1717
:alt: OSCR
.. oscr-badge:endHTML
<!-- oscr-badge:start -->
<a href="https://openscicode.org/badge/doi/10.1126/sciadv.aeh1717"><img src="https://openscicode.org/badge/doi/10.1126/sciadv.aeh1717.svg" alt="OSCR"></a>
<!-- oscr-badge:end -->On GitHub, open the README, choose Edit (the pencil), paste the snippet under the title, then "Commit changes".
If you choose to, you can have the badge kept up to date for you, with oscr badge --write from the command line or with the GitHub Action in your repository's workflows. Every other form and option (a card, AsciiDoc, LaTeX, shields.io) is on the badge page.
Request its removal
To ask OSCR to remove this record, the copies of its authors' scripts or its tracing map, use the removal request page: signed in, you say who you are, what to remove and why, then review and confirm the request. Published rules decide every request (how).
Discussion, reproductions, activity
Discussion: code errors and mismatches between the code and the paper about this paper and its code, from readers and its authors, beside the paper and its tracing map.
Report a mismatch between the code and the paper · Report a code error (signed in)
Reproductions: reports from readers who ran the authors' code and did not get the paper's result, what they ran, with which environment, commit and data.
Report a reproduction failure (signed in)
Versions of its code: the releases of its code tied to a version of this paper (the preprint, the accepted manuscript, the version of record…), each with the tracing map versioned with it.
Activity: what happens around this paper: new versions of its record, its map's validation, discussions and reproductions. It opens with sign-in.
