Real-time volumetric imaging of cells and molecules in deep tissues with Takoyaki ultrasound.
7 blocks of code here have a permanent identifier (oscr:b:…), listed with the matches below: citable for good, with a page of its own. Select a match and press Cite to copy it. What a block identifier is.
The 9 matches
- [1] § Methods › Takoyaki AM/B-mode sequences ↔ Code/SetupMatrix1024_15MHz_Takoyaki_LiveImaging.m, lines 1 to 38 · score 0.87 · sparse random apertures, full amplitude, half amplitude, transmission aperture, receive apertures, 3.3 mm · block
oscr:b:DBAQW52J10XP8-G· Report a mismatch - [2] § Methods › Takoyaki BURST sequence ↔ Code/SetupMatrix1024_15MHz_Takoyaki_BURST.m, lines 1 to 47 · score 0.85 · BURST scheme, BURST script, half cycles, transmit aperture, receive aperture, accumulated · block
oscr:b:MCTQ9Z24AT6MR-V· Report a mismatch - [3] § Methods › Image similarity analysis ↔ Data/Fig2/a-h/similarity_analysis.m, lines 22 to 73 · score 0.81 · multi scale SSIM, MS SSIM, bounding box, transformation matrices, mask, phantoms · block
oscr:b:RQ5ET5Z7ASTAH-7· Report a mismatch - [4] § Results › The Takoyaki sequence allows efficient acquisition of 3D volumes ↔ Code/SetupMatrix1024_15MHz_Takoyaki_LiveImaging.m, lines 1 to 38 · score 0.80 · sparse random apertures, full amplitude, half amplitude, transmit aperture, receive apertures, complementary · block
oscr:b:DBAQW52J10XP8-G· Report a mismatch - [5] § Results › The Takoyaki sequence allows efficient acquisition of 3D volumes ↔ Code/SetupMatrix1024_15MHz_Takoyaki_BURST.m, lines 1 to 47 · score 0.80 · full amplitude, half amplitude, Takoyaki BURST, transmit aperture, receive apertures, sparse · block
oscr:b:MCTQ9Z24AT6MR-V· Report a mismatch - [6] § Methods › Image similarity analysis ↔ Data/Fig2/a-h/similarity_analysis.m, lines 1 to 19 · score 0.70 · Medical Registration, transformation matrices, registered mask, phantom, axis · block
oscr:b:Y00DJWK2H2KP1-4· Report a mismatch - [7] § Methods › Takoyaki AM/B-mode sequences ↔ Code/SetupMatrix1024_15MHz_Takoyaki_LiveImaging.m, lines 112 to 171 · score 0.61 · longer jump caused, Frustum, compensate, gap, Takoyaki, depth · block
oscr:b:4XQE1RHM4Q78X-Q· Report a mismatch - [8] § Methods › Contrast-to-background ratio (CBR) calculation for in vitro experiments ↔ Data/Fig2/a-h/CBR_anisotropy.m, lines 54 to 153 · score 0.56 · eroded masks, rectangular, interspace, box, slice, CBR · block
oscr:b:AJ2Z47Y4PR1CK-Y· Report a mismatch - [9] § Results › The Takoyaki sequence allows efficient acquisition of 3D volumes ↔ Code/SetupMatrix1024_15MHz_Takoyaki_LiveImaging.m, lines 234 to 302 · score 0.52 · delay laws, focused beams, translated, matrix, Takoyaki, apertures · block
oscr:b:MDEGAZ9F8D4BX-2· Report a mismatch
Paper
Loaded from Europe PMC by your browser; OSCR does not store it: doi.org · Europe PMC
The paper is loaded when this pane is shown.
The authors' code
MATLAB · 1,007 lines · 34 KB · no license · 4 matches
- %% Takoyaki live imaging script
- % This script scans multiple focal points simultaneously using the 1024 element 15 MHz
- % 2D matrix array probe from Vermon with the UTA 1024-MUX adapter on a
- % Vantage 256 system. All 4 banks are used for transmission. For receive apertures,
- % one complementary set of 4 sparse random apertures are used. The 4
- % receive apertures are synthesized for each transmit aperture.
- %
- % P.nCode = 3, Takoyaki AM / P.nCode = 1, Takoyaki Bmode
- % At the beginning, the sequence shows live imaging without saving images.
- % After clicking "save the images", it starts to store the images.
- %
- % To run this script, there are two required files:
- % computeTrans_MatrixProbeIncluded.m
- % saved100CompRndApod.mat
- %
- % written by Sunho Lee
- % Parameter settings
- clear;
- P.pathName = 'D:\Sunho\TakoyakiAM' ;
- P.numberImagesToSave = 2;
- P.startDepth_mm = 3.3;
- P.endDepth_mm = 10;
- P.Voltage = 1.6;
- P.numFrames = 2 ;
- P.numSyntheticRcvs = 4; % 4 receives for Fully-Sampled Array
- P.txFocus_mm = 7; % focal depth
- P.aperpatch = 8;
- P.numRays = 32 - P.aperpatch + 1; % no. of Rays (for each dimension)
- P.nCode = 3; % 3 = 1 full amplitude + 2 half amplitude
- Display_output = 20; %Display mode only: 20 gives a power of 1.0 for a linear output, 40 gives a power of 0.5 for a square root compression
- RcvProfile.AntiAliasCutoff = 15; % 10, 15, 20, 30
- %% Specify system parameters.
- Resource.Parameters.numTransmit = 256; % number of transmit channels.
- Resource.Parameters.numRcvChannels = 256; % number of receive channels.
- Resource.Parameters.verbose = 2; % 2: warnings and status 1: warnings 0: errors only
- Resource.Parameters.speedOfSound = 1540; % set speed of sound in m/sec before calling computeTrans
- Resource.Parameters.speedCorrectionFactor = 1.0;
- Resource.Parameters.fakeScanhead = 0; % allow system HW operation with nothing connected
- Resource.Parameters.simulateMode = 0;
- % Resource.Parameters.simulateMode = 1 forces simulate mode, even if hardware is present.
- % Resource.Parameters.simulateMode = 2 stops sequence and processes RcvData continuously.
- Resource.Parameters.Connector = 1;
- %% Specify Trans structure array.
- Trans.name = 'Matrix1024-15';
- Trans.units = 'mm';
- Trans = computeTrans_MatrixProbeIncluded(Trans);
- Trans.HVMux = computeUTAMux1024; % add the HV Mux programming for the UTA 1024-MUX
- % this files contains 100 sets of 4 Rnd Apertures that are complementary.
- % CompRndApod is matrix of 100x4x1024. The sum of every 4 matrices (of the
- % second dimention) account for the full aperture.
- load('saved100CompRndApod'); %This file has 100x4x1024
- CompRndApod=CompRndApod(1,:,:); % for rcv aperture - will use only one set
- % patch-like aperture
- Papod = zeros(P.numRays^2, 5, 1024);
- for i = 1:P.numRays
- for j = 1:P.numRays
- center1 = floor(P.aperpatch/2)+i-1;
- center2 = floor(P.aperpatch/2)+j-1;
- M = zeros(32); % initialize 32 x 32 matrix
- M(center1-floor(P.aperpatch/2)+1:center1+ceil(P.aperpatch/2),...
- center2-floor(P.aperpatch/2)+1:center2+ceil(P.aperpatch/2)) = 1;
- Papod((i-1)*P.numRays + j, 1, :) = reshape(M, [1, 1024]);
- Papod((i-1)*P.numRays + j,2:5,:) = CompRndApod;
- end
- end
- Papod2 = Papod;
- Papod(:,1,:) = ones(size(Papod,1),1,1024);
- % create aperture index for each Papod
- for i = 1:size(Papod, 1)
- for j = 1:size(Papod, 2)
- Paper(i,j) = computeMuxAperture(squeeze(Papod(i,j,:))', Trans);
- end
- end
- % Intermediate Variables
- waveLength = (Resource.Parameters.speedOfSound/1000)/Trans.frequency;
- if strcmp(Trans.units,'mm')
- Trans.ElementPosMm = Trans.ElementPos;
- Trans.ElementPosWL = Trans.ElementPos./waveLength;
- else
- Trans.ElementPosMm = Trans.ElementPos.*waveLength;
- Trans.ElementPosWL = Trans.ElementPos;
- end
- ElementPosx = unique(Trans.ElementPosWL(:,1));
- ElementPosy = unique(Trans.ElementPosWL(:,2)); % y direction has a gap
- % Convert mm to wavelength
- demodFreq = Trans.frequency; % demodulation frequency
- P.startDepth = P.startDepth_mm/waveLength; % Acquisition depth in wavelengths
- P.endDepth = P.endDepth_mm/waveLength; % This should preferrably be a multiple of 128 samples
- P.txFocus = P.txFocus_mm/waveLength;
- %% PData
- PData(1).PDelta = [1 1 1]/2;
- PData(1).Size(1) = ceil(((P.numRays+3)*Trans.spacing)/PData(1).PDelta(1)); % +3 compensates for gaps
- PData(1).Size(2) = ceil(((P.numRays)*Trans.spacing)/PData(1).PDelta(2));
- PData(1).Size(3) = ceil((P.endDepth-P.startDepth)/PData(1).PDelta(3));
- PData(1).Origin = [-((PData(1).Size(2)-1)/2)*PData(1).PDelta(2), ((PData(1).Size(1)-1)/2)*PData(1).PDelta(1), P.startDepth];
- P.lateral_voxel_size = PData(1).PDelta(1)*100e-6 ;
- P.axial_voxel_size = PData(1).PDelta(3)*100e-6 ;
- % specify Region structures.
- PData(1).Region = repmat(struct('Shape',struct( ...
- 'Name','Frustum',...
- 'Position',[0,0,P.startDepth],...
- 'l1',Trans.spacing,...
- 'w1',Trans.spacing,...
- 'height',P.endDepth-P.startDepth,...
- 'l2',Trans.spacing,...
- 'w2',Trans.spacing)),1,P.numRays^2);
- for i = 1:P.numRays
- for j = 1:P.numRays
- PData.Region((i-1)*P.numRays + j).Shape.Position(1) = (ElementPosx(i)+ElementPosx(i+P.aperpatch-1))/2;
- PData.Region((i-1)*P.numRays + j).Shape.Position(2) = -(ElementPosy(j)+ElementPosy(j+P.aperpatch-1))/2;
- if ismember(j, [2:8:P.numRays])
- PData.Region((i-1)*P.numRays + j).Shape.Position(2) = -(ElementPosy(j)+ElementPosy(j+8-1)-Trans.spacing/2)/2;
- PData.Region((i-1)*P.numRays + j).Shape.w1 = 1.5*Trans.spacing; % to compensate longer jump caused by gaps
- PData.Region((i-1)*P.numRays + j).Shape.w2 = 1.5*Trans.spacing;
- end
- if ismember(j, [8:8:P.numRays])
- PData.Region((i-1)*P.numRays + j).Shape.Position(2) = -(ElementPosy(j)+ElementPosy(j+8-1)+Trans.spacing/2)/2;
- PData.Region((i-1)*P.numRays + j).Shape.w1 = 1.5*Trans.spacing;
- PData.Region((i-1)*P.numRays + j).Shape.w2 = 1.5*Trans.spacing;
- end
- end
- end
- PData(1).Region = computeRegions(PData(1));
- for i = 1:8
- for j = 1:8
- PData.Region(P.numRays^2 + (i-1)*8 + j).Shape.Name = 'Custom';
- center_idx = (j:8:P.numRays)' + P.numRays*((i:8:P.numRays)-1); center_idx = center_idx(:);
- pixels_set = PData.Region(center_idx(1)).PixelsLA;
- for set_n = 2:length(center_idx)
- pixels_set = union(pixels_set, PData.Region(center_idx(set_n)).PixelsLA);
- end
- PData.Region(P.numRays^2 + (i-1)*8 + j).PixelsLA = pixels_set;
- PData.Region(P.numRays^2 + (i-1)*8 + j).numPixels = length(PData.Region(P.numRays^2 + (i-1)*8 + j).PixelsLA);
- end
- end
- PData.Region = PData.Region(end-8^2+1:end);
- %% Specify Media. Use point targets in middle of PData.
- Media.MP(1,:) = [0,0,60,1.0]; % single point.
- Media.numPoints = size(Media.MP,1);
- %% Resources
- % Resource.VDAS.el2ChMapDisable = 1;
- Resource.RcvBuffer(1).datatype = 'int16';
- Resource.RcvBuffer(1).rowsPerFrame = 4096*8^2*P.nCode*P.numSyntheticRcvs ;
- Resource.RcvBuffer(1).colsPerFrame = 256;
- Resource.RcvBuffer(1).numFrames = P.numFrames;
- Resource.ImageBuffer(1).numFrames = P.numFrames;
- % Resource.ImageBuffer(2).numFrames = P.numFrames;
- Resource.InterBuffer(1).datatype = 'complex';
- Resource.InterBuffer(1).numFrames = 1;
- Resource.DisplayWindow(1).Type = 'Verasonics';
- Resource.DisplayWindow(1).Title = '3D Flash Image - XZ plane';
- Resource.DisplayWindow(1).pdelta = 0.25;
- Resource.DisplayWindow(1).Position = [0,580, ...
- ceil(PData(1).Size(2)*PData(1).PDelta(2)/Resource.DisplayWindow(1).pdelta), ... % width
- ceil(PData(1).Size(3)*PData(1).PDelta(3)/Resource.DisplayWindow(1).pdelta)]; % height
- Resource.DisplayWindow(1).Orientation = 'xz';
- Resource.DisplayWindow(1).ReferencePt = [PData(1).Origin(1),-15,PData(1).Origin(3)];
- Resource.DisplayWindow(1).Colormap = gray(256);
- Resource.DisplayWindow(1).AxesUnits = 'mm';
- % Resource.DisplayWindow(2).mode = '2d';
- Resource.DisplayWindow(2).Type = 'Verasonics';
- Resource.DisplayWindow(2).Title = '3D Flash Image - YZ plane';
- Resource.DisplayWindow(2).pdelta = Resource.DisplayWindow(1).pdelta;
- Resource.DisplayWindow(2).Position = [430,580, ...
- ceil(PData(1).Size(1)*PData(1).PDelta(1)/Resource.DisplayWindow(2).pdelta), ... % width
- ceil(PData(1).Size(3)*PData(1).PDelta(3)/Resource.DisplayWindow(2).pdelta)]; % height
- Resource.DisplayWindow(2).Orientation = 'yz';
- Resource.DisplayWindow(2).ReferencePt = [-15,-PData(1).Origin(2),PData(1).Origin(3)];
- Resource.DisplayWindow(2).Colormap = gray(256);
- Resource.DisplayWindow(2).AxesUnits = 'mm';
- % Resource.DisplayWindow(3).mode = '2d';
- Resource.DisplayWindow(3).Type = 'Verasonics';
- Resource.DisplayWindow(3).Title = '3D Flash Image - XY plane';
- Resource.DisplayWindow(3).pdelta = Resource.DisplayWindow(1).pdelta;
- Resource.DisplayWindow(3).Position = [0,40, ...
- ceil(PData(1).Size(2)*PData(1).PDelta(2)/Resource.DisplayWindow(3).pdelta), ... % width
- ceil(PData(1).Size(1)*PData(1).PDelta(1)/Resource.DisplayWindow(3).pdelta)]; % height
- Resource.DisplayWindow(3).Orientation = 'xy';
- Resource.DisplayWindow(3).ReferencePt = [PData(1).Origin(1),-PData(1).Origin(2),60];%PData.Region(end).Shape.oPAIntersect];
- Resource.DisplayWindow(3).Colormap = gray(256);
- Resource.DisplayWindow(3).AxesUnits = 'mm';
- % Resource.DisplayWindow(3).mode = '2d';
- %% Specify Transmit waveform structure.
- TW.type = 'parametric';
- TW.Parameters = [Trans.frequency,.67,2,1]; % A, B, C, D
- P.TW = TW;
- % Specify TPC structure.
- TPC(1).hv = P.Voltage;
- %% Specify TX structure array.
- TX = repmat(struct('waveform', 1, ...
- 'Origin', [0.0,0.0,0.0], ...
- 'focus', P.txFocus, ...
- 'Steer', [0.0,0.0], ...
- 'Apod', ones(1,1024), ...
- 'Delay', zeros(1,256),...
- 'peakCutOff', 2,...
- 'peakBLMax', 20,...
- 'Angle', 0,...
- 'aperture',1,...
- 'TXPD',[]), 1,P.numRays^2);
- % generate parabolic delay law for each patch
- for i=1:P.numRays
- for j = 1:P.numRays
- TX((i-1)*P.numRays+j).Apod = squeeze(Papod2((i-1)*P.numRays+j,1,:))';
- TX((i-1)*P.numRays+j).aperture = Paper((i-1)*P.numRays+j,1);
- TX((i-1)*P.numRays+j).Origin = [(ElementPosx(i)+ElementPosx(i+P.aperpatch-1))/2, -(ElementPosy(j)+ElementPosy(j+P.aperpatch-1))/2, 0];
- TX((i-1)*P.numRays+j).Delay = computeTXDelays(TX((i-1)*P.numRays+j));
- % TX((i-1)*P.numRays+j).TXPD = computeTXPD(TX((i-1)*(P.numRays-1)+j),PData(1));
- end
- end
- k = P.numRays^2;
- Paper_real = zeros(1,64);
- % multiple focused points
- for i = 1:8
- for j = 1:8
- delay_matrix = reshape(TX(j+25*(i-1)).Delay, [32 32]);
- delay_matrix = repmat(delay_matrix(i:i+7,j:j+7),4,4);
- translated_D = reshape(circshift(delay_matrix, [i-1, j-1]), 1, 1024);
- Ap = ones(32);
- % remove truncated unit arrays that do not fully form focused beams
- if i > 1; Ap([1:i-1, 32-8+i:32], :) = 0; end
- if j > 1; Ap(:, [1:j-1, 32-8+j:32]) = 0; end
- Ap = reshape(Ap, 1, 1024);
- TX(k+j+8*(i-1)) = TX(1);
- TX(k+j+8*(i-1)).Delay = translated_D;
- TX(k+j+8*(i-1)).focus = 0.0;
- TX(k+j+8*(i-1)).Origin = [0.0, 0.0, 0.0];
- TX(k+j+8*(i-1)).Apod = Ap;
- Paper_real(j+(i-1)*8) = computeMuxAperture(Ap, Trans);
- TX(k+j+8*(i-1)).aperture = Paper_real(j+(i-1)*8);
- if P.nCode > 1
- TX(k+(i-1)*8+j+8^2) = TX(k+j+8*(i-1));
- TX(k+(i-1)*8+j+2*8^2) = TX(k+j+8*(i-1));
- % checkerboard masking for AM
- mask = repmat([repmat([1 0], 1, 16) repmat([0 1], 1, 16)], 1, 16);
- TX(k+(i-1)*8+j+8^2).Apod = TX(k+j+8*(i-1)).Apod.*mask;
- TX(k+(i-1)*8+j+2*8^2).Apod = TX(k+j+8*(i-1)).Apod.*(~mask);
- end
- end
- end
- TX = TX(end-8^2*P.nCode+1:end);
- % showTXPD
- %% allows to visualize the TX in 3D (similar to the EventAnalysisTool)
- % f = figure;
- %
- % for i=1:64
- % plot3(Trans.ElementPos(find(TX(i).Apod==1),1),Trans.ElementPos(find(TX(i).Apod==1),2),TX(i).Delay(find(TX(i).Apod==1)),'k*');
- % zlim([0 5]);
- % xlim([min(Trans.ElementPos(:,1)) max(Trans.ElementPos(:,1))]);
- % ylim([min(Trans.ElementPos(:,2)) max(Trans.ElementPos(:,2))]);
- % view(gca,-40,49);grid on;
- % zlabel('Delay (wavelength)'); xlabel('X (mm)'); ylabel('Y (mm)')
- %
- % pause(.5);
- %
- % end
- %% Specify TGC Waveform structure.
- TGC(1).CntrlPts = [100 1010 1023 1023 1023 1023 1023 1023];
- TGC(1).rangeMax = 128;
- TGC(1).Waveform = computeTGCWaveform(TGC);
- maxAcqLength = sqrt(P.endDepth^2 + (32*Trans.spacing)^2 + (35*Trans.spacing)^2 );
- %% Receive
- Receive = repmat(struct(...
- 'Apod', zeros(1,Trans.numelements), ...
- 'startDepth', P.startDepth, ...
- 'endDepth', 128/(4*2)*ceil(maxAcqLength/(128/(4*2))), ...
- 'TGC', 1, ...
- 'mode', 0, ...
- 'bufnum', 1, ...
- 'framenum', 1, ...
- 'acqNum', 1, ...
- 'aperture',0, ...
- 'sampleMode', 'NS200BW', ...
- 'callMediaFunc', 0), 1, P.numFrames*P.numSyntheticRcvs*P.nCode*8^2);
- for j = 1:P.numFrames
- k=P.numSyntheticRcvs*8^2*P.nCode*(j-1);
- for n = 1:P.nCode
- kk = P.numSyntheticRcvs*8^2*(n-1);
- for i = 1:8^2
- kkk=P.numSyntheticRcvs*(i-1);
- for w=1:P.numSyntheticRcvs
- Receive(w+kkk+kk+k).acqNum = w+kkk;
- Receive(w+kkk+kk+k).framenum = j;
- Receive(w+kkk+kk+k).aperture = Paper(i,w+1);
- if n==1
- Receive(w+kkk+kk+k).Apod = squeeze(Papod(i,w+1,:))';
- else % for AM
- Receive(w+kkk+kk+k).Apod = -squeeze(Papod(i,w+1,:))'; % subtract
- Receive(w+kkk+kk+k).mode = 1; % accumulate
- end
- end
- end
- end
- end
- %% Recon
- senscutoff = 0.6;
- Recon(1) = struct('senscutoff', senscutoff, ...
- 'pdatanum', 1, ...
- 'rcvBufFrame', -1, ...
- 'IntBufDest', [1,1],...
- 'ImgBufDest', [1,-1], ...
- 'RINums', 1:8^2*P.numSyntheticRcvs) ;
- % Define ReconInfo structures.
- ReconInfo = repmat(struct('mode', 'accumIQ', ...
- 'txnum', 1, ...
- 'rcvnum', 1, ...
- 'scaleFactor', 1, ...
- 'regionnum', 1), 1, 8^2*P.numSyntheticRcvs);
- ReconInfo(1).mode = 3;
- for w=1:8^2
- k= P.numSyntheticRcvs*(w-1);
- for i = 1:P.numSyntheticRcvs
- ReconInfo(i+k).txnum = w;
- ReconInfo(i+k).rcvnum = i+k;
- ReconInfo(i+k).regionnum = w;
- if i == 1
- ReconInfo(i+k).mode = 3;
- end
- if i == P.numSyntheticRcvs
- ReconInfo(i+k).mode = 5;
- end
- end
- end
- ReconInfo(end).mode = 5;
- %% Specify Process structure arrays.
- pgain=20;
- Process(1).classname = 'Image';
- Process(1).method = 'imageDisplay';
- Process(1).Parameters = {'imgbufnum',1,...
- 'framenum',-1,...
- 'pdatanum',1,...
- 'srcData','intensity3D',...
- 'pgain', pgain,...
- 'persistMethod','none',...
- 'persistLevel',30,...
- 'interpMethod','4pt',...
- 'compressMethod','power',...
- 'compressFactor',75,...
- 'mappingMethod','full',...
- 'display',1,...
- 'displayWindow',1};
- Process(2).classname = 'Image';
- Process(2).method = 'imageDisplay';
- Process(2).Parameters = {'imgbufnum',1,...
- 'framenum',-1,...
- 'pdatanum',1,...
- 'srcData','intensity3D',...
- 'pgain', pgain,...
- 'persistMethod','none',...
- 'persistLevel',30,...
- 'interpMethod','4pt',...
- 'compressMethod','power',...
- 'compressFactor',75,...
- 'mappingMethod','full',...
- 'display',1,...
- 'displayWindow',2};
- Process(3).classname = 'Image';
- Process(3).method = 'imageDisplay';
- Process(3).Parameters = {'imgbufnum',1,...
- 'framenum',-1,...
- 'pdatanum',1,...
- 'srcData','intensity3D',...
- 'pgain', pgain,...
- 'persistMethod','none',...
- 'persistLevel',30,...
- 'interpMethod','4pt',...
- 'compressMethod','power',...
- 'compressFactor',75,...
- 'mappingMethod','full',...
- 'display',1,...
- 'displayWindow',3};
- Process(4).classname = 'External';
- Process(4).method = 'volumetricPlot';
- Process(4).Parameters = {'srcbuffer','image',...
- 'srcbufnum',1,...
- 'srcframenum',-1,...
- 'dstbuffer','none'};
- % Save Image Data
- Process(5).classname = 'External';
- Process(5).method = 'saveImageData';
- Process(5).Parameters = {'srcbuffer','image',... % name of buffer to process.
- 'srcbufnum',1,...
- 'srcframenum',-1,... % process the most recent frame.
- 'dstbuffer','none'};
- Process(6).classname = 'External';
- Process(6).method = 'vstic';
- Process(6).Parameters = {'srcbuffer','none'};
- Process(7).classname = 'External';
- Process(7).method = 'vstoc';
- Process(7).Parameters = {'srcbuffer','none'};
- % Save RF Data
- Process(8).classname = 'External';
- Process(8).method = 'saveRFData';
- Process(8).Parameters = {'srcbuffer','receive',... % name of buffer to process.
- 'srcbufnum',1,...
- 'srcframenum',-1,... % process the most recent frame.
- 'dstbuffer','none'};
- %external function
- EF(1).Function = vsv.seq.function.ExFunctionDef('volumetricPlot', @volumetricPlot);
- EF(2).Function = vsv.seq.function.ExFunctionDef('saveImageData', @saveImageData);
- EF(3).Function = vsv.seq.function.ExFunctionDef('vstic', @vstic);
- EF(4).Function = vsv.seq.function.ExFunctionDef('vstoc', @vstoc);
- EF(5).Function = vsv.seq.function.ExFunctionDef('saveRFData', @saveRFData);
- % Specify SeqControl structure arrays.
- SeqControl(1).command = 'jump'; % jump back to start
- SeqControl(1).argument = 1;
- SeqControl(2).command = 'timeToNextAcq'; % time between synthetic aperture acquisitions
- SeqControl(2).argument = 250;
- SeqControl(3).command = 'timeToNextAcq'; % time between frames
- % SeqControl(3).argument = 20000; % 20 msec
- SeqControl(3).argument = 1000000; % 2s
- SeqControl(3).condition = 'ignore'; %Recon processing time
- SeqControl(4).command = 'returnToMatlab';
- SeqControl(5).command = 'triggerOut';
- SeqControl(6).command = 'loopCnt'; % - Set loop count. for looping on blocs
- SeqControl(6).argument = P.numberImagesToSave/P.numFrames-1; %
- SeqControl(6).condition = 'counter1';
- SeqControl(7).command = 'loopTst'; % loop test
- SeqControl(7).argument = []; % set apres
- SeqControl(7).condition = 'counter1';
- nsc = 8; % nsc is count of SeqControl objects
- %% Specify Event Structure arrays
- n = 1; % start index for Events
- for j = 1:Resource.RcvBuffer(1).numFrames
- v=P.numSyntheticRcvs*8^2*P.nCode*(j-1);
- for w=1:8^2
- k= P.numSyntheticRcvs*(w-1);
- for i = 1:P.numSyntheticRcvs
- for m = 1:P.nCode
- Event(n).info = 'Transmit/Receive.';
- Event(n).tx = w + (m-1)*8^2;
- Event(n).rcv = i+k+v+(m-1)*8^2*P.numSyntheticRcvs;
- Event(n).recon = 0; % no reconstruction.
- Event(n).process = 0; % no processing
- Event(n).seqControl = [2,5]; %
- n = n+1;
- end
- end
- end
- Event(n-1).seqControl = [3,5];
- Event(n).info = 'Transfer To Host';
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0; % no reconstruction.
- Event(n).process = 0; % no processing
- Event(n).seqControl = [nsc,nsc+1]; % set wait time and transfer data
- SeqControl(nsc).command = 'transferToHost';
- nsc = nsc + 1;
- SeqControl(nsc).command = 'waitForTransferComplete';
- SeqControl(nsc).argument = nsc-1;
- nsc = nsc + 1;
- n = n+1;
- Event(n).info = ['3D Reconstruct Frame ' num2str(i)];
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 1;
- Event(n).process = 0;
- Event(n).seqControl = 0;
- n = n+1;
- Event(n).info = ['Process XZ - Frame ' num2str(i)];
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 1;
- Event(n).seqControl = 0;
- n = n+1;
- Event(n).info = ['Process YZ - Frame ' num2str(i)];
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 2;
- Event(n).seqControl = 0;
- n = n+1;
- Event(n).info = ['Process XY - Frame ' num2str(i)];
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 3;
- Event(n).seqControl = 0;
- n = n+1;
- Event(n).info = ['3D Process - Frame' num2str(i)];
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 4;
- Event(n).seqControl = 0;
- n = n+1;
- Event(n).info = 'Return to Matlab';
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 0;
- Event(n).seqControl = 4;
- n = n+1;
- Event(n).info = 'HW/SW Sync';
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 0;
- Event(n).seqControl = nsc;
- SeqControl(nsc).command = 'sync';
- nsc = nsc + 1;
- n = n+1;
- end
- Event(n).info = 'Jump';
- Event(n).tx = 0; % no TX structure.
- Event(n).rcv = 0; % no Rcv structure.
- Event(n).recon = 0; % no reconstruction.
- Event(n).process = 0; % call processing function
- Event(n).seqControl = 1; %
- n = n+1;
- % Acquire Image Data
- nStartAcquire = n;
- Event(n).info = 'tic ';
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 6;
- Event(n).seqControl = 0;
- n = n+1;
- % set loop count
- Event(n).info = 'start counter';
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0; % no reconstruction.
- Event(n).process = 0; % no processing
- Event(n).seqControl = 6;
- n = n+1;
- SeqControl(7).argument = n;
- for j = 1:Resource.RcvBuffer(1).numFrames
- v=P.numSyntheticRcvs*8^2*P.nCode*(j-1);
- for w=1:8^2
- k= P.numSyntheticRcvs*(w-1);
- for i = 1:P.numSyntheticRcvs
- for m = 1:P.nCode
- Event(n).info = 'Transmit/Receive.';
- Event(n).tx = w + (m-1)*8^2;
- Event(n).rcv = i+k+v+(m-1)*8^2*P.numSyntheticRcvs;
- Event(n).recon = 0; % no reconstruction.
- Event(n).process = 0; % no processing
- Event(n).seqControl = [2,5]; %
- n = n+1;
- end
- end
- end
- Event(n-1).seqControl = [3,5];
- Event(n).info = 'Transfer To Host';
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0; % no reconstruction.
- Event(n).process = 0; % no processing
- Event(n).seqControl = [nsc, nsc+1]; % set wait time and transfer data [nsc,nsc+1]
- SeqControl(nsc).command = 'transferToHost';
- nsc = nsc + 1;
- SeqControl(nsc).command = 'waitForTransferComplete';
- SeqControl(nsc).argument = nsc-1;
- nsc = nsc + 1;
- n = n+1;
- Event(n).info = ['3D Reconstruct Frame ' num2str(i)];
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 1;
- Event(n).process = 0;
- Event(n).seqControl = 0;
- n = n+1;
- Event(n).info = ['Process XZ - Frame ' num2str(i)];
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 1;
- Event(n).seqControl = 0;
- n = n+1;
- Event(n).info = ['Process YZ - Frame ' num2str(i)];
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 2;
- Event(n).seqControl = 0;
- n = n+1;
- Event(n).info = ['Process XY - Frame ' num2str(i)];
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 3;
- Event(n).seqControl = 0;
- n = n+1;
- Event(n).info = ['3D Process - Frame' num2str(i)];
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 4;
- Event(n).seqControl = 0;
- n = n+1;
- %
- Event(n).info = 'Return to Matlab';
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 0;
- Event(n).seqControl = 4;
- n = n+1;
- Event(n).info = 'HW/SW Sync';
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 0;
- Event(n).seqControl = nsc;
- SeqControl(nsc).command = 'sync';
- nsc = nsc + 1;
- n = n+1;
- Event(n).info = 'save Image Data';
- Event(n).tx = 0; % no transmit
- Event(n).rcv = 0; % no rcv
- Event(n).recon = 0; % no reconstruction
- Event(n).process = 5; % process
- Event(n).seqControl = 0;
- n = n+1;
- % Event(n).info = 'save RF Data';
- % Event(n).tx = 0; % no transmit
- % Event(n).rcv = 0; % no rcv
- % Event(n).recon = 0; % no reconstruction
- % Event(n).process = 8; % process
- % Event(n).seqControl = 0;
- % n = n+1;
- Event(n).info = 'toc ';
- Event(n).tx = 0;
- Event(n).rcv = 0;
- Event(n).recon = 0;
- Event(n).process = 7;
- Event(n).seqControl = 0;
- n = n+1;
- end
- % Event(n).info = 'save Image Data';
- % Event(n).tx = 0; % no transmit
- % Event(n).rcv = 0; % no rcv
- % Event(n).recon = 0; % no reconstruction
- % Event(n).process = 5; % process
- % Event(n).seqControl = 0;
- % n = n+1;
- Event(n).info = 'Loop back until all images are acquired';
- Event(n).tx = 0; % no transmit
- Event(n).rcv = 0; % no rcv
- Event(n).recon = 0; % no reconstruction
- Event(n).process = 0; % process
- Event(n).seqControl = 7;
- n = n+1;
- %% User specified UI Control Elements
- import vsv.seq.uicontrol.VsSliderControl;
- % - Sensitivity Cutoff
- UI(1).Control = VsSliderControl('LocationCode','UserB7','Label','Sens. Cutoff',...
- 'SliderMinMaxVal',[0,1.0,Recon(1).senscutoff],...
- 'SliderStep',[0.025,0.1],'ValueFormat','%1.3f', ...
- 'Callback', @SensCutoffCallback );
- % - Section number change
- UI(2).Control = VsSliderControl('LocationCode','UserB1','Label','Z-Section',...
- 'SliderMinMaxVal',[1,P.endDepth,Resource.DisplayWindow(3).ReferencePt(3)],...
- 'SliderStep',[1/(P.endDepth-1) 10/(P.endDepth-1)],'ValueFormat','%3.0f', ...
- 'Callback', @ZSectionChange );
- % - Section number change
- UI(3).Control = VsSliderControl('LocationCode','UserB2','Label','Y-Section',...
- 'SliderMinMaxVal',[PData(1).Origin(2)-(PData(1).Size(1)-1)*PData(1).PDelta(1), PData(1).Origin(2), Resource.DisplayWindow(1).ReferencePt(2)],...
- 'SliderStep',[1/((PData(1).Size(2)-1)*PData(1).PDelta(2)-1) 10/((PData(1).Size(2)-1)*PData(1).PDelta(2)-1)],'ValueFormat','%3.0f', ...
- 'Callback', @YSectionChange);
- % - Section number change
- UI(4).Control = VsSliderControl('LocationCode','UserB3','Label','X-Section',...
- 'SliderMinMaxVal',[PData(1).Origin(1), PData(1).Origin(1)+(PData(1).Size(2)-1)*PData(1).PDelta(2), Resource.DisplayWindow(2).ReferencePt(1)],...
- 'SliderStep',[1/((PData(1).Size(1)-1)*PData(1).PDelta(1)-1) 10/((PData(1).Size(1)-1)*PData(1).PDelta(1)-1)],'ValueFormat','%3.0f', ...
- 'Callback', @XSectionChange);
- % - compression
- CompressionFactor=1.3;
- UI(5).Control = VsSliderControl('LocationCode','UserA2','Label','CompressionP',...
- 'SliderMinMaxVal',[1,11,CompressionFactor],...
- 'SliderStep',[1/40,4/40],'ValueFormat','%1.1f', ...
- 'Callback', @CompressionP );
- UI(6).Control = {'UserC1','Style','VsPushButton','Label','Save Image'};
- UI(6).Callback = text2cell('%StartSaving');
- % Specify factor for converting sequenceRate to frameRate.
- frameRateFactor = 3;
- % Save all the structures to a .mat file.
- filename = 'SetupMatrix1024_15MHz_Takoyaki_LiveImaging';
- save(['MatFiles/',filename]);
- VSX
- return
- %StartSaving
- display('Start Saving')
- Control = repmat(struct('Command','set&Run','Parameters',[]),1,1);
- nStartAcquire = evalin('base','nStartAcquire');
- Control(1).Parameters = {'Parameters',1,'startEvent',nStartAcquire};
- evalin('base','Resource.Parameters.startEvent = nStartAcquire;');
- assignin('base','Control', Control);
- %StartSaving
- %% **** Callback routines used by UIControls (UI) ****
- function SensCutoffCallback(~,~,UIValue)
- %SensCutoff - Sensitivity cutoff change
- ReconL = evalin('base', 'Recon');
- for i = 1:size(ReconL,2)
- ReconL(i).senscutoff = UIValue;
- end
- assignin('base','Recon',ReconL);
- Control = evalin('base','Control');
- Control.Command = 'update&Run';
- Control.Parameters = {'Recon'};
- assignin('base','Control', Control);
- end
- function YSectionChange(~,~,UIValue)
- %YSectionChange
- RS = evalin('base','Resource');
- RefPt = RS.DisplayWindow(1).ReferencePt;
- RefPt(2) = UIValue;
- RS.DisplayWindow(1).ReferencePt = RefPt;
- assignin('base','Resource',RS);
- PDataT = evalin('base','PData');
- P = evalin('base','P');
- PDataT(1).Region(1).Shape.oPAIntersect = RefPt(2);
- PDataT(1).Region = computeRegions(PDataT(1));
- assignin('base','PData',PDataT);
- Control = repmat(struct('Command',[],'Parameters',[]),1,2);
- Control(1).Command = 'set&Run';
- Control(1).Parameters = {'DisplayWindow',1,'ReferencePt',RefPt};
- Control(2).Command = 'update&Run';
- Control(2).Parameters = {'PData'};
- assignin('base','Control', Control);
- end
- function XSectionChange(~,~,UIValue)
- %XSectionChange
- RS = evalin('base','Resource');
- RefPt = RS.DisplayWindow(2).ReferencePt;
- RefPt(1) = UIValue;
- RS.DisplayWindow(2).ReferencePt = RefPt;
- assignin('base','Resource',RS);
- PDataT = evalin('base','PData');
- P = evalin('base','P');
- PDataT(1).Region(1).Shape.oPAIntersect = RefPt(1);
- PDataT(1).Region = computeRegions(PDataT(1));
- assignin('base','PData',PDataT);
- Control = repmat(struct('Command',[],'Parameters',[]),1,2);
- Control(1).Command = 'set&Run';
- Control(1).Parameters = {'DisplayWindow',2,'ReferencePt',RefPt};
- Control(2).Command = 'update&Run';
- Control(2).Parameters = {'PData'};
- assignin('base','Control', Control);
- end
- function ZSectionChange(~,~,UIValue)
- %ZSectionChange
- RS = evalin('base','Resource');
- RefPt = RS.DisplayWindow(3).ReferencePt;
- RefPt(3) = UIValue;
- RS.DisplayWindow(3).ReferencePt = RefPt;
- assignin('base','Resource',RS);
- PDataT = evalin('base','PData');
- P = evalin('base','P');
- PDataT(1).Region(1).Shape.oPAIntersect = RefPt(3);
- PDataT(1).Region = computeRegions(PDataT(1));
- assignin('base','PData',PDataT);
- Control = repmat(struct('Command',[],'Parameters',[]),1,2);
- Control(1).Command = 'set&Run';
- Control(1).Parameters = {'DisplayWindow',3,'ReferencePt',RefPt};
- Control(2).Command = 'update&Run';
- Control(2).Parameters = {'PData'};
- assignin('base','Control', Control);
- end
- function CompressionP(~,~,UIValue)
- %CompressionP
- CompressionFactor = UIValue;
- assignin('base','CompressionFactor',CompressionFactor);
- end
- %% **** Callback routines used by External function definition (EF) ****
- function volumetricPlot(ImgData)
- persistent handle3D
- PData = evalin('base','PData');
- Trans = evalin('base','Trans');
- P = evalin('base','P');
- v_depth = 1;
- CFactor = evalin('base','CompressionFactor');
- ImgData=ImgData.^(1/CFactor);
- ImgData(:,:,1:v_depth)=0;
- ImgData = flipdim(ImgData,3);
- if isempty(handle3D) || ~ishandle(handle3D)
- figure('Position', [430, 50, 450, 450]);
- handle3D = axes;
- end
- set(handle3D,'NextPlot','replacechildren');
- vol3d('cdata', ImgData,'texture', '2D','Parent', handle3D);
- grid(handle3D, 'on'); colormap(handle3D,'gray');
- set(handle3D,'NextPlot','add');
- xl=PData(1).Size(2);
- yl=PData(1).Size(1);
- zl=PData(1).Size(3);
- dx=PData(1).PDelta(2);
- dy=PData(1).PDelta(1);
- dz=PData(1).PDelta(3);
- plot3(handle3D,Trans.ElementPosWL(:,1)./dx+(xl-1)/2,Trans.ElementPosWL(:,2)./dy+(yl-1)/2,(Trans.ElementPosWL(:,3)+P.endDepth)./dz,'k.');
- view(handle3D,-45,30);
- end
- function saveImageData(ImgData)
- persistent bloc_count;
- if isempty(bloc_count)
- bloc_count = 1;
- end
- P = evalin('base','P');
- Path = P.pathName;
- if bloc_count == 1
- mkdir(Path)
- save([Path '\P.mat'],'P');
- end
- eval(['pAM3D_',num2str(bloc_count),' = squeeze(ImgData);']);
- save([Path '\pAM3D_' num2str(bloc_count) '.mat'],['pAM3D_',num2str(bloc_count)]);
- display(['Saved image #',num2str(bloc_count) '!'])
- bloc_count = bloc_count+1;
- if bloc_count == P.numberImagesToSave + 1
- display('End of the acquisition!')
- end
- end
- function vstic(varargin)
- tic
- end
- function vstoc(varargin)
- persistent Tend;
- if isempty(Tend)
- Tend = toc;
- disp(['Elapsed time is ', num2str(Tend), ' seconds.'])
- else
- Tend(end+1) = toc;
- disp(['Elapsed time is ', num2str(Tend(end)), ' seconds.'])
- end
- P = evalin('base','P');
- if length(Tend) == P.numberImagesToSave
- Path = P.pathName;
- save([Path '\timelog.mat'],'Tend');
- end
- end
- function saveRFData(RFData)
- persistent RF_count;
- if isempty(RF_count)
- RF_count = 1;
- end
- P = evalin('base','P');
- Path = P.pathName;
- if RF_count == 1
- mkdir(Path)
- save([Path '\P.mat'],'P');
- end
- eval(['RFData_',num2str(RF_count),' = squeeze(RFData);']);
- save([Path '\RFData_' num2str(RF_count) '.mat'],['RFData_',num2str(RF_count)]);
- display(['Saved RFData #',num2str(RF_count) '!'])
- RF_count = RF_count+1;
- if RF_count == P.numberImagesToSave + 1
- display('End of the acquisition!')
- end
- end
SetupMatrix1024_15MHz_Takoyaki_LiveImaging.m at commit e3bab2d, no license · at the source
Overview
- Andrew and Peggy Cherng Department of Medical Engineering, California Institute of Technology, Pasadena, CA USA
- Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, CA USA
- Howard Hughes Medical Institute, Pasadena, CA USA
Abstract
Acoustic contrast agents and reporter genes play a critical role in allowing ultrasound to visualize blood flow, map molecules and track cellular function in optically opaque living organisms. However, many advanced agents requiring high acoustic pressures have been imaged primarily in 2D, while biological phenomena of interest unfurl in three dimensions. Here, we introduce a method for efficient, dynamic imaging of contrast agents and reporter genes in 3D using multiplexed matrix array transducers. Our “Takoyaki” pulse sequence uses the simultaneous scanning of multiple focal points to excite contrast agents with sufficient acoustic pressure for nonlinear imaging while efficiently covering 3D space. We first characterize and benchmark Takoyaki imaging performance with gas vesicle contrast agents in vitro. Then we establish utility in cellular imaging by visualizing acoustic reporter gene expression in a mouse model of glioblastoma. Finally, we demonstrate real-time volumetric imaging by tracking the dynamics of fluid motion in mouse brain ventricles during and after intraventricular contrast injection. Takoyaki imaging enables a more comprehensive understanding of biological processes by providing spatiotemporal information in 3D within the constraints of accessible multiplexed matrix-array systems.
Reproduced under the paper's license (CC BY), from the paper cited above.
Repositories
Its files are read in the Code ↔ Paper reader above, with 9 matches between paragraphs and lines of code.
shapiro-lab/Takoyaki-imaging
e3bab2d2b11eee2aaeb479eaf530bf6efea03ef2, 19 March 2026Availability: 1 check, the latest on 28 September 2026: the link answers
- 28 September 2026: the link answers
12 files
- Code/
SetupMatrix1024_15MHz_Ta , MATLAB, 1,157 lines, 2 matcheskoyaki_BURST.m - Code/
SetupMatrix1024_15MHz_Ta , MATLAB, 1,007 lines, 4 matcheskoyaki_LiveImaging.m - Code/
computeTrans_MatrixProbe , MATLAB, 1,829 linesIncluded.m - Data/
Fig2/ , MATLAB, 153 lines, 1 matcha-h/ CBR_anisotropy.m - Data/
Fig2/ , MATLAB, 59 linesa-h/ phantom_visualization.m - Data/
Fig2/ , MATLAB, 84 lines, 2 matchesa-h/ similarity_analysis.m - Data/
Fig3/ , Python, 92 linesvisualize_tumor.py - Data/
Fig4/ , MATLAB, 34 linesvisualize_signaldensity. m - Data/
Fig4/ , Python, 88 linesvisualize_ventricles.py - Data/
Fig5/ , Python, 84 linesBrain_tumor/ visualize_BURST_tumor.py - Data/
Fig5/ , Python, 38 linesVentricle/ visualize_BURST_ventricl es.py - README.md, Text, 15 lines
Zenodo 19124225
Availability: 1 check, the latest on 28 September 2026: the link answers (HTTP 200)
- 28 September 2026: the link answers (HTTP 200)
12 files
- Code/
SetupMatrix1024_15MHz_Ta , MATLAB, 1,157 lineskoyaki_BURST.m - Code/
SetupMatrix1024_15MHz_Ta , MATLAB, 1,007 lineskoyaki_LiveImaging.m - Code/
computeTrans_MatrixProbe , MATLAB, 1,829 linesIncluded.m - Data/
Fig2/ , MATLAB, 153 linesa-h/ CBR_anisotropy.m - Data/
Fig2/ , MATLAB, 59 linesa-h/ phantom_visualization.m - Data/
Fig2/ , MATLAB, 84 linesa-h/ similarity_analysis.m - Data/
Fig3/ , Python, 92 linesvisualize_tumor.py - Data/
Fig4/ , MATLAB, 34 linesvisualize_signaldensity. m - Data/
Fig4/ , Python, 88 linesvisualize_ventricles.py - Data/
Fig5/ , Python, 84 linesBrain_tumor/ visualize_BURST_tumor.py - Data/
Fig5/ , Python, 38 linesVentricle/ visualize_BURST_ventricl es.py - README.md, Text, 11 lines
Code availability
The ultrasound sequence scripts and data analysis codes used to generate key figures and results are available on GitHub (https://
Reproduced under the paper's license (CC BY), from the paper cited above.
Tracing map
Proposed by the machine: these links were found in the paper and verified at the source, without human review. The map will receive a Zenodo DOI once one of the paper's authors has validated it with their ORCID.
What the map holds:
- 2 repositories of the authors' code, each at its verified commit, with its license and how the link was found in the paper;
- 22 scripts, each with its path and the digest of its content;
- 9 matches between paragraphs of the paper and lines of the code (method lexical-v1);
- neither the text of the paper nor the code itself.
Its JSON (tracing-map.json) is deposited on Zenodo with its DOI once the map is validated.
Data
No dataset and no data link were found in the paper.
Data availability
Primary image data have been deposited in the CaltechDATA repository at 10.22002/
Reproduced under the paper's license (CC BY), from the paper cited above.
Versions
The history of this record: each version stored by the harvester or made by a correction of its authors or of the maintainers of its code, and what changed in its facts. The texts of the paper (its abstract, its availability statements) are not part of it; versions that changed only those are not listed.
Version 1, 28 September 2026: the first record
Recorded: type, language, journal, volume, issue, pages, dates, 5 authors, 5 keywords, 12 MeSH terms, 6 funders, 58 references.
Cite
This paper
Lee, S., Wu, D., Malounda, D., Rabut, C., & Shapiro, M. G. (2026). Real-time volumetric imaging of cells and molecules in deep tissues with Takoyaki ultrasound. Nature communications, 17(1), 7281. https://
BibTeX
@article{lee2026real,
author = {Lee, Sunho and Wu, Di and Malounda, Dina and Rabut, Claire and Shapiro, Mikhail G},
title = {{Real-time volumetric imaging of cells and molecules in deep tissues with Takoyaki ultrasound}},
journal = {Nature communications},
year = {2026},
month = may,
volume = {17},
number = {1},
pages = {7281},
publisher = {Nature Portfolio},
issn = {2041-1723},
doi = {10.1038/
url = {https://
pmid = {42168209},
pmcid = {PMC13402839}
}
RIS
TY - JOUR
AU - Lee, Sunho
AU - Wu, Di
AU - Malounda, Dina
AU - Rabut, Claire
AU - Shapiro, Mikhail G
TI - Real-time volumetric imaging of cells and molecules in deep tissues with Takoyaki ultrasound
T2 - Nature communications
J2 - Nat Commun
PY - 2026
DA - 2026/
VL - 17
IS - 1
SP - 7281
SN - 2041-1723
PB - Nature Portfolio
DO - 10.1038/
UR - https://
LA - en
ER -
CSL-JSON
{
"id": "10.1038/
"type": "article-journal",
"title": "Real-time volumetric imaging of cells and molecules in deep tissues with Takoyaki ultrasound",
"container-title": "Nature communications",
"author": [
{
"family": "Lee",
"given": "Sunho"
},
{
"family": "Wu",
"given": "Di"
},
{
"family": "Malounda",
"given": "Dina"
},
{
"family": "Rabut",
"given": "Claire"
},
{
"family": "Shapiro",
"given": "Mikhail G"
}
],
"container-title-short":
"volume": "17",
"issue": "1",
"page": "7281",
"DOI": "10.1038/
"PMID": "42168209",
"PMCID": "PMC13402839",
"ISSN": "2041-1723",
"publisher": "Nature Portfolio",
"URL": "https://
"language": "en",
"issued": {
"date-parts": [
[
2026,
5,
21
]
]
}
}
The tracing map gets a citation of its own once an author has validated it and it has a DOI.
Similar papers
The papers with a page that share the most with this one: the tools found in their code, their categories, datasets, cited references and authors, the rarest counting most.
- [1] doi:10.1126/sciadv.adk7957
- Four-dimensional computational ultrasound imaging of brain hemodynamics.Journal: Science advancesIn common: other, mouse, 7 references
- [2] doi:10.1016/j.ebiom.2024.105457 [code]
- 3D ultrasound localization microscopy of the nonhuman primate brain.Journal: EBioMedicineIn common: Image Processing Toolbox, other, 5 references
- [3] doi:10.1016/j.ebiom.2022.103995 [code]
- In vivo whole brain microvascular imaging in mice using transcranial 3D Ultrasound Localization Microscopy.Journal: EBioMedicineIn common: other, mouse, 5 references
- [4] doi:10.1126/sciadv.adt9778
- Ultrasound matrix imaging for 3D transcranial in vivo localization microscopy.Journal: Science advancesIn common: other, 4 references
- [5] doi:10.1111/ejn.70582 [code]
- Multifiber Array-Based Photometry System for Multiregional Functional Mapping in the Mouse Brain.Journal: The European journal of neuroscienceIn common: scikit-image, SciPy, NumPy, mouse, 3 references
- [6] doi:10.64898/2025.12.23.696162 [code]
- Multi-fiber array-based photometry system for multi-regional functional mapping in the mouse brainJournal: bioRxiv (preprint)In common: scikit-image, SciPy, NumPy, mouse, 3 references
- [7] doi:10.1093/gigascience/giad035 [code]
- FriendlyClearMap: an optimized toolkit for mouse brain mapping and analysis.Journal: GigaScienceIn common: napari, scikit-image, Image Processing Toolbox, 2 other tools, mouse, 1 reference
- [8] doi:10.1038/s41598-021-04676-9 [code]
- Accurate determination of marker location within whole-brain microscopy images.Journal: Scientific reportsIn common: napari, scikit-image, Image Processing Toolbox, 2 other tools, mouse, 1 reference
- [9] doi:10.3389/fncel.2024.1408607 [code]
- Astrocytic Calcium Signaling Toolkit (astroCaST): efficient analysis of dynamic astrocytic calcium events.Journal: Frontiers in cellular neuroscienceIn common: napari, scikit-image, SciPy, 1 other tool, cellular / molecular, 1 reference
- [10] doi:10.1038/s41593-023-01500-7 [code]
- Decoding motor plans using a closed-loop ultrasonic brain-machine interface.Journal: Nature neuroscienceIn common: Image Processing Toolbox, other, 3 references
Contribute
The authors of this paper can claim it, correct its record and validate its tracing map, and the maintainers of its code (its owner, or a public member of its organization) correct what it says of their repository; anyone signed in can ask for its removal. Every request goes to OSCR's own machine, which answers it; your account page follows them.
Sign in with ORCID to claim this paper as one of its authors, correct its record or validate its tracing map: when the paper's metadata lists your ORCID iD, you are recognized at once. Maintainers of its code: sign in with GitHub, then claim the repository on your account page.
Claim this paper
Correct its record
Say what each link of this record is, remove the ones that are not the paper's, add the ones that are missing. The correction becomes a new version of the record, in its Versions section.
Validate its tracing map
You validate the map as this page shows it: 2 repositories of the authors' code, each at its verified commit and with its license, 22 scripts, and 9 matches between paragraphs and code (see the Code and Map sections). It then receives a DOI on Zenodo, with you (your ORCID iD) and OSCR as its creators; the code itself is not deposited.
The map's fingerprint: sha256:4b095865f6ff201a…
Add the badge to the code's README
If you are an author or a maintainer of this paper's code, you can add this badge. It says what OSCR knows of the paper (its code, its validated tracing map) and links the code to this page. Paste one of these snippets under the README's title. Keep the two marks around it, so that the badge can be replaced in place and is never added twice. OSCR changes nothing in your repository.
Markdown
<!-- oscr-badge:start -->
[](https://openscicode.org/badge/doi/10.1038/s41467-026-72961-0)
<!-- oscr-badge:end -->reStructuredText
.. oscr-badge:start
.. image:: https://openscicode.org/badge/doi/10.1038/s41467-026-72961-0.svg
:target: https://openscicode.org/badge/doi/10.1038/s41467-026-72961-0
:alt: OSCR
.. oscr-badge:endHTML
<!-- oscr-badge:start -->
<a href="https://openscicode.org/badge/doi/10.1038/s41467-026-72961-0"><img src="https://openscicode.org/badge/doi/10.1038/s41467-026-72961-0.svg" alt="OSCR"></a>
<!-- oscr-badge:end -->On GitHub, open the README, choose Edit (the pencil), paste the snippet under the title, then "Commit changes".
If you choose to, you can have the badge kept up to date for you, with oscr badge --write from the command line or with the GitHub Action in your repository's workflows. Every other form and option (a card, AsciiDoc, LaTeX, shields.io) is on the badge page.
Request its removal
To ask OSCR to remove this record, the copies of its authors' scripts or its tracing map, use the removal request page: signed in, you say who you are, what to remove and why, then review and confirm the request. Published rules decide every request (how).
Discussion, reproductions, activity
Discussion: code errors and mismatches between the code and the paper about this paper and its code, from readers and its authors, beside the paper and its tracing map.
Report a mismatch between the code and the paper · Report a code error (signed in)
Reproductions: reports from readers who ran the authors' code and did not get the paper's result, what they ran, with which environment, commit and data.
Report a reproduction failure (signed in)
Versions of its code: the releases of its code tied to a version of this paper (the preprint, the accepted manuscript, the version of record…), each with the tracing map versioned with it.
Activity: what happens around this paper: new versions of its record, its map's validation, discussions and reproductions. It opens with sign-in.
