Forward model of rat electroencephalogram: influence of inhomogeneous and anisotropic skull.
One block of code here has a permanent identifier (oscr:b:…), listed with the matches below: citable for good, with a page of its own. Select a match and press Cite to copy it. What a block identifier is.
The 2 matches
- [1] § Methods › Sensing electrodes and modelling of neural activity of the brain ↔ plot_summary_figure.py, lines 1 to 45 · score 0.54 · head model, dipole orientation, inhomogeneity, anisotropy · block
oscr:b:2SGRB2A1W5275-0· Report a mismatch - [2] § Methods › Leadfield comparisons on a volumetric grid ↔ plot_summary_figure.py, lines 1 to 45 · score 0.51 · head model, dipole orientations, vector, Leadfield · block
oscr:b:2SGRB2A1W5275-0· Report a mismatch
Paper
Loaded from Europe PMC by your browser; OSCR does not store it: doi.org · Europe PMC
The paper is loaded when this pane is shown.
The authors' code
Python · 321 lines · 13 KB · no license · 2 matches
- """
- Step 2 of 2 — Generate the leadfield contrast summary figure.
- Prerequisites
- -------------
- 1. Install dependencies:
- pip install -r requirements.txt
- 2. Run compute_metrics.py first (or use the pre-computed files in data/).
- Usage
- -----
- python plot_summary_figure.py
- Output
- ------
- lf_summary_figure.png (filename controlled by config.OUTPUT_FILE)
- What the figure shows
- ---------------------
- Each row corresponds to one leadfield contrast (L0 vs L1, L0 vs L4, L1 vs L4).
- Within each row there are two sub-rows:
- • Top sub-row — XY / XZ / YZ projection maps of the normalised Euclidean
- distance between the two leadfield models, overlaid with
- arrows indicating the dipole orientation that maximises that
- distance (max-contrast direction).
- • Bottom sub-row — scatter plots of each spatial coordinate (X, Y, Z) against
- the corresponding component of the unit max-contrast
- direction vector.
- Level codes
- -----------
- L0 — homogeneous head model
- L1 — inhomogeneous head model
- L4 — anisotropic head model
- """
- import sys
- import os
- from pathlib import Path
- import numpy as np
- import matplotlib
- import matplotlib.pyplot as plt
- import matplotlib.gridspec as gridspec
- from scipy.interpolate import griddata
- # ── locate config / data relative to this script ─────────────────────────────
- _HERE = Path(os.path.abspath(__file__)).parent
- sys.path.insert(0, str(_HERE))
- import config as cfg
- DATA_DIR = _HERE / cfg.OUTPUT_PATH
- # Contrasts to include, in display order.
- # Each entry is (forward_level, inverse_level) — must match the .npz filenames.
- CONTRASTS = cfg.LEADFIELD_CONTRASTS
- # ─────────────────────────────────────────────────────────────────────────────
- # Helper: 2-D projection with optional interpolation
- # ─────────────────────────────────────────────────────────────────────────────
- def _aggregate_projection(dip_pos, values, axis, agg_func='mean', interpolate=True):
- """
- Collapse a 3-D scatter of (dipole positions, scalar values) onto a 2-D plane
- by removing one axis and aggregating duplicate positions.
- Parameters
- ----------
- dip_pos : (N, 3) array of dipole positions [mm]
- values : (N,) scalar value per dipole
- axis : int axis to project out (0=x, 1=y, 2=z)
- agg_func : str 'mean', 'min', or 'max'
- interpolate: bool fill missing grid cells with linear interpolation
- Returns
- -------
- coords_0, coords_1 : 1-D arrays with unique coordinates on the two kept axes
- projection : (len(coords_0), len(coords_1)) aggregated grid
- """
- axes = [0, 1, 2]
- axes.remove(axis)
- coords_0 = np.unique(dip_pos[:, axes[0]])
- coords_1 = np.unique(dip_pos[:, axes[1]])
- X_grid, Y_grid = np.meshgrid(coords_0, coords_1, indexing='ij')
- projection = np.full(X_grid.shape, np.nan)
- agg = {'mean': np.mean, 'max': np.max, 'min': np.min}[agg_func]
- for i, c0 in enumerate(coords_0):
- for j, c1 in enumerate(coords_1):
- mask = (dip_pos[:, axes[0]] == c0) & (dip_pos[:, axes[1]] == c1)
- if np.any(mask):
- projection[i, j] = agg(values[mask])
- if interpolate:
- valid = ~np.isnan(projection)
- if np.any(valid) and np.any(~valid):
- pts = np.column_stack([X_grid[valid], Y_grid[valid]])
- vals_v = projection[valid]
- pts_all = np.column_stack([X_grid.ravel(), Y_grid.ravel()])
- projection = griddata(pts, vals_v, pts_all, method='linear').reshape(X_grid.shape)
- return coords_0, coords_1, projection
- # ─────────────────────────────────────────────────────────────────────────────
- # Main figure
- # ─────────────────────────────────────────────────────────────────────────────
- def plot_summary_figure(dip_pos, all_metrics, elec_pos, contrasts, clim_euclid, output_file):
- """
- Build and save the leadfield-contrast summary figure.
- Parameters
- ----------
- dip_pos : (nDip, 3) decimated dipole positions [mm]
- all_metrics : dict {(level_a, level_b): (corr, euclid, rel_diff, mc_vecs)}
- elec_pos : (nElec, 3) electrode positions [mm]
- contrasts : list of (level_a, level_b) pairs
- clim_euclid : (vmin, vmax) or None for auto colour limits
- output_file : Path where to write the figure
- """
- n = len(contrasts)
- h_comb = cfg.MEGA_FIGURE_H_COMBINED
- h_scat = cfg.MEGA_FIGURE_H_SCATTER
- h_ratios = [val for _ in range(n) for val in (h_comb, h_scat)]
- fig_w = cfg.FIGSIZE_PROJECTION[0]
- fig_h = n * (h_comb + h_scat)
- fig = plt.figure(figsize=(fig_w, fig_h))
- gs = gridspec.GridSpec(
- 2 * n, 3,
- height_ratios=h_ratios,
- hspace=cfg.MEGA_FIGURE_HSPACE,
- wspace=0.35,
- figure=fig,
- )
- vmin, vmax = clim_euclid if clim_euclid is not None else (None, None)
- contour_lvls = (
- np.linspace(vmin, vmax, cfg.CONTOUR_LEVELS)
- if vmin is not None and vmax is not None
- else cfg.CONTOUR_LEVELS
- )
- coord_labels = ['X [mm]', 'Y [mm]', 'Z [mm]']
- comp_labels = ['X', 'Y', 'Z']
- scatter_colors = ['tab:red', 'tab:blue', 'tab:green']
- # (horiz_axis, vert_axis, xlabel, ylabel)
- proj_specs = [
- (0, 1, 'X [mm]', 'Y [mm]'),
- (0, 2, 'X [mm]', 'Z [mm]'),
- (1, 2, 'Y [mm]', 'Z [mm]'),
- ]
- last_cf = None
- for row_idx, (level_a, level_b) in enumerate(contrasts):
- _, euclid, _, mc_vecs = all_metrics[(level_a, level_b)]
- # Scale arrows so the longest arrow = QUIVER_SCALE_LF_CONTRAST [mm]
- mags = np.linalg.norm(mc_vecs, axis=1)
- max_mag = np.nanmax(mags) if np.nanmax(mags) > 1e-12 else 1.0
- scaled = mc_vecs / max_mag * cfg.QUIVER_SCALE_LF_CONTRAST
- # 2-D projections of normalised Euclidean distance
- Xp, Yp, XY = _aggregate_projection(dip_pos, euclid, 2, cfg.AGG_FUNC)
- Xp, Zp, XZ = _aggregate_projection(dip_pos, euclid, 1, cfg.AGG_FUNC)
- Yp, Zp, YZ = _aggregate_projection(dip_pos, euclid, 0, cfg.AGG_FUNC)
- proj_grids = [
- (Xp, Yp, XY),
- (Xp, Zp, XZ),
- (Yp, Zp, YZ),
- ]
- combined_row = 2 * row_idx
- scatter_row = 2 * row_idx + 1
- panel_label = chr(ord('A') + row_idx)
- # ── Top sub-row: contourf + quiver ────────────────────────────────────
- for col, ((xi, yi, xlabel, ylabel), (cx, cy, cgrid)) in enumerate(
- zip(proj_specs, proj_grids)):
- ax = fig.add_subplot(gs[combined_row, col])
- if col == 0:
- ax.text(
- -0.18, 1.0, panel_label,
- transform=ax.transAxes,
- fontsize=cfg.FONTSIZE_TITLE + 2,
- fontweight='bold',
- va='top', ha='right', clip_on=False,
- )
- cf = ax.contourf(
- cx, cy, cgrid.T,
- levels=contour_lvls,
- cmap=cfg.COLORMAP_LF_EUCLIDEAN,
- vmin=vmin, vmax=vmax,
- )
- ax.quiver(
- dip_pos[:, xi], dip_pos[:, yi],
- scaled[:, xi], scaled[:, yi],
- color='black', scale=1, scale_units='xy',
- width=0.003, alpha=0.7,
- )
- ax.scatter(
- elec_pos[:, xi], elec_pos[:, yi],
- c='b', s=30, zorder=5,
- label='Electrodes' if col == 0 else None,
- )
- ax.grid(True, alpha=0.3)
- ax.xaxis.set_major_formatter(plt.FormatStrFormatter('%.1f'))
- ax.yaxis.set_major_formatter(plt.FormatStrFormatter('%.1f'))
- ax.set_aspect('equal')
- ax.set_xlabel(xlabel, fontsize=cfg.FONTSIZE_AXIS_LABEL)
- if col == 0:
- ax.set_ylabel(
- f'L{level_a} vs L{level_b}\n{ylabel}',
- fontsize=cfg.FONTSIZE_AXIS_LABEL,
- )
- ax.legend(fontsize=7, markerscale=1.2)
- else:
- ax.set_ylabel(ylabel, fontsize=cfg.FONTSIZE_AXIS_LABEL)
- ax.tick_params(labelsize=cfg.FONTSIZE_TICK_LABEL)
- last_cf = cf
- # ── Bottom sub-row: coordinate vs direction component scatter ─────────
- norms = np.linalg.norm(mc_vecs, axis=1)
- valid = norms > 1e-12
- directions = np.full_like(mc_vecs, np.nan)
- directions[valid] = mc_vecs[valid] / norms[valid, np.newaxis]
- for col in range(3):
- ax = fig.add_subplot(gs[scatter_row, col])
- coord_vals = dip_pos[:, col]
- ax.scatter(
- coord_vals[valid], directions[valid, col],
- c=scatter_colors[col], s=cfg.SCATTER_MARKER_SIZE, alpha=0.25,
- )
- ax.set_xlabel(coord_labels[col], fontsize=cfg.FONTSIZE_AXIS_LABEL)
- ax.set_ylabel(f'dir {comp_labels[col]}', fontsize=cfg.FONTSIZE_AXIS_LABEL)
- ax.set_ylim(-1.05, 1.05)
- ax.axhline(0, color='gray', linewidth=0.8, linestyle='--')
- ax.xaxis.set_major_formatter(plt.FormatStrFormatter('%.1f'))
- ax.yaxis.set_major_formatter(plt.FormatStrFormatter('%.2f'))
- ax.grid(True, alpha=0.3)
- ax.tick_params(labelsize=cfg.FONTSIZE_TICK_LABEL)
- # ── Shared horizontal colorbar ────────────────────────────────────────────
- if cfg.SHOW_COLORBAR and last_cf is not None:
- fig.subplots_adjust(bottom=0.06)
- cbar_ax = fig.add_axes([0.1, 0.02, 0.8, 0.008])
- cbar = fig.colorbar(last_cf, cax=cbar_ax, orientation='horizontal')
- cbar.set_label('LF Normalised Euclidean', fontsize=cfg.FONTSIZE_COLORBAR_LABEL)
- if vmin is not None and vmax is not None:
- cbar.set_ticks(np.arange(vmin, vmax + 0.01, 0.1))
- cbar.ax.xaxis.set_major_formatter(plt.FormatStrFormatter('%.1f'))
- cbar.ax.tick_params(labelsize=cfg.FONTSIZE_TICK_LABEL)
- plt.savefig(output_file, dpi=cfg.IMAGE_DPI, bbox_inches='tight')
- plt.close()
- print(f"Saved: {output_file}")
- # ─────────────────────────────────────────────────────────────────────────────
- # Entry point
- # ─────────────────────────────────────────────────────────────────────────────
- def main():
- matplotlib.rcParams.update({
- 'axes.labelsize': cfg.FONTSIZE_AXIS_LABEL,
- 'xtick.labelsize': cfg.FONTSIZE_TICK_LABEL,
- 'ytick.labelsize': cfg.FONTSIZE_TICK_LABEL,
- 'axes.titlesize': cfg.FONTSIZE_TITLE,
- 'legend.fontsize': cfg.FONTSIZE_LEGEND,
- })
- print("Loading pre-computed data from:", DATA_DIR)
- dip_pos = np.load(DATA_DIR / 'dipole_positions.npy')
- elec_pos = np.load(DATA_DIR / 'electrode_positions.npy')
- print(f" dipole_positions: {dip_pos.shape}")
- print(f" electrode_positions: {elec_pos.shape}")
- all_metrics = {}
- for (la, lb) in CONTRASTS:
- fname = DATA_DIR / f'metrics_L{la}vsL{lb}.npz'
- if not fname.exists():
- raise FileNotFoundError(
- f"Missing data file: {fname}\n"
- "Run compute_metrics.py first (see README.md)."
- )
- d = np.load(fname)
- all_metrics[(la, lb)] = (
- d['correlations'],
- d['euclidean_dists'],
- d['rel_diffs'],
- d['max_contrast_vecs'],
- )
- print(f" metrics_L{la}vsL{lb}.npz "
- f"(euclid mean={np.nanmean(d['euclidean_dists']):.4f})")
- clim = cfg.CLIM_LF_EUCLIDEAN
- if clim is None:
- all_euclid = np.concatenate([all_metrics[k][1] for k in all_metrics])
- clim = (float(np.nanmin(all_euclid)), float(np.nanmax(all_euclid)))
- print(f" Auto colour limits: {clim}")
- else:
- print(f" Colour limits (from config): {clim}")
- output_file = _HERE / cfg.OUTPUT_FILE
- plot_summary_figure(dip_pos, all_metrics, elec_pos, CONTRASTS, clim, output_file)
- if __name__ == '__main__':
- main()
plot_summary_figure.py at commit f780e22, no license · at the source
Overview
- Faculty of Electrical Engineering and Communication, Brno University of Technology, Brno, 61600 Czech Republic
- National Institute of Mental Health, Klecany, 250 67 Czech Republic
- Faculty of Chemistry, Brno University of Technology, Brno, 61200 Czech Republic
- Nencki Institute of Experimental Biology of Polish Academy of Sciences, 02-093 Warsaw, Poland
- Third Faculty of Medicine, Charles University, Prague, 10000 Czech Republic
Abstract
The abstract is not reproduced here: the paper's license (CC BY-NC-ND) does not allow it. Read it in the paper, at the publisher or on Europe PMC.
Repository
Its files are read in the Code ↔ Paper reader above, with 2 matches between paragraphs and lines of code.
VlastaKoudelka/skull-leadfield
f780e223dff6faadc53f209d3b4fba61698481f9, 11 June 2026Availability: 1 check, the latest on 27 September 2026: the link answers
- 27 September 2026: the link answers
4 files
- compute_metrics.py, Python, 356 lines
- config.py, Python, 70 lines
- plot_summary_figure.py, Python, 321 lines, 2 matches
- README.md, Text, 103 lines
The paper's code and data availability statement is in the Data section.
Tracing map
Proposed by the machine: these links were found in the paper and verified at the source, without human review. The map will receive a Zenodo DOI once one of the paper's authors has validated it with their ORCID.
What the map holds:
- 1 repository of the authors' code, each at its verified commit, with its license and how the link was found in the paper;
- 3 scripts, each with its path and the digest of its content;
- 2 matches between paragraphs of the paper and lines of the code (method lexical-v1);
- neither the text of the paper nor the code itself.
Its JSON (tracing-map.json) is deposited on Zenodo with its DOI once the map is validated.
Data
Datasets cited
- zenodo:17975304, at Zenodo; found in “Data availability”
Code and data availability statement
The paper has a code and data availability statement. Its license (CC BY-NC-ND) does not allow reproducing it here; in short, from what the harvester recognized in it:
- it points to a dataset: Zenodo 17975304
- it points to the authors' code: VlastaKoudelka/
skull-leadfield - it says that the data are available on request
Read it in the paper: doi.org/10.1038/s41598-026-58885-1.
Versions
The history of this record: each version stored by the harvester or made by a correction of its authors or of the maintainers of its code, and what changed in its facts. The texts of the paper (its abstract, its availability statements) are not part of it; versions that changed only those are not listed.
Version 1, 27 September 2026: the first record
Recorded: type, language, journal, volume, issue, pages, dates, 8 authors, 3 keywords, 8 MeSH terms, 1 funder, 52 references.
Cite
This paper
Kuratko, D., Koudelka, V., Vejmola, C., Dusek, F., Kucera, F., Wójcik, D. K., Palenicek, T., & Lacik, J. (2026). Forward model of rat electroencephalogram: influence of inhomogeneous and anisotropic skull. Scientific reports, 16(1), 28626. https://
BibTeX
@article{kuratko2026forw
author = {Kuratko, David and Koudelka, Vlastimil and Vejmola, Cestmir and Dusek, Filip and Kucera, Frantisek and Wójcik, Daniel K and Palenicek, Tomas and Lacik, Jaroslav},
title = {{Forward model of rat electroencephalogram: influence of inhomogeneous and anisotropic skull}},
journal = {Scientific reports},
year = {2026},
month = jun,
volume = {16},
number = {1},
pages = {28626},
publisher = {Nature Publishing Group},
issn = {2045-2322},
doi = {10.1038/
url = {https://
pmid = {42331932},
pmcid = {PMC13575132}
}
RIS
TY - JOUR
AU - Kuratko, David
AU - Koudelka, Vlastimil
AU - Vejmola, Cestmir
AU - Dusek, Filip
AU - Kucera, Frantisek
AU - Wójcik, Daniel K
AU - Palenicek, Tomas
AU - Lacik, Jaroslav
TI - Forward model of rat electroencephalogram: influence of inhomogeneous and anisotropic skull
T2 - Scientific reports
J2 - Sci Rep
PY - 2026
DA - 2026/
VL - 16
IS - 1
SP - 28626
SN - 2045-2322
PB - Nature Publishing Group
DO - 10.1038/
UR - https://
LA - en
ER -
CSL-JSON
{
"id": "10.1038/
"type": "article-journal",
"title": "Forward model of rat electroencephalogram: influence of inhomogeneous and anisotropic skull",
"container-title": "Scientific reports",
"author": [
{
"family": "Kuratko",
"given": "David"
},
{
"family": "Koudelka",
"given": "Vlastimil"
},
{
"family": "Vejmola",
"given": "Cestmir"
},
{
"family": "Dusek",
"given": "Filip"
},
{
"family": "Kucera",
"given": "Frantisek"
},
{
"family": "Wójcik",
"given": "Daniel K"
},
{
"family": "Palenicek",
"given": "Tomas"
},
{
"family": "Lacik",
"given": "Jaroslav"
}
],
"container-title-short":
"volume": "16",
"issue": "1",
"page": "28626",
"DOI": "10.1038/
"PMID": "42331932",
"PMCID": "PMC13575132",
"ISSN": "2045-2322",
"publisher": "Nature Publishing Group",
"URL": "https://
"language": "en",
"issued": {
"date-parts": [
[
2026,
6,
22
]
]
}
}
The tracing map gets a citation of its own once an author has validated it and it has a DOI.
Similar papers
The papers with a page that share the most with this one: the tools found in their code, their categories, datasets, cited references and authors, the rarest counting most.
- [1] doi:10.3390/bioengineering11111071 [code]
- Improving EEG Forward Modeling Using High-Resolution Five-Layer BEM-FMM Head Models: Effect on Source Reconstruction Accuracy.Journal: Bioengineering (Basel, Switzerland)In common: pandas, Matplotlib, NumPy, EEG, 10 references
- [2] doi:10.1016/j.neuroimage.2022.119851
- Brainstorm-DUNEuro: An integrated and user-friendly Finite Element Method for modeling electromagnetic brain activity.Journal: NeuroImageIn common: EEG, 11 references
- [3] doi:10.3390/brainsci12010114
- Validating EEG, MEG and Combined MEG and EEG Beamforming for an Estimation of the Epileptogenic Zone in Focal Cortical Dysplasia.Journal: Brain sciencesIn common: EEG, 9 references
- [4] doi:10.1016/j.dcn.2022.101092 [code]
- Cortical Source Analysis of Event-Related Potentials: A Developmental Approach.Journal: Developmental cognitive neuroscienceIn common: EEG, 7 references
- [5] doi:10.3389/fnins.2024.1443752
- Investigating the effect of template head models on Event-Related Potential source localization: a simulation and real-data study.Journal: Frontiers in neuroscienceIn common: EEG, 6 references
- [6] doi:10.1007/s10548-026-01178-7
- The Impact of Brain Tumors and Craniotomy Lesions on Scalp EEG.Journal: Brain topographyIn common: EEG, 6 references
- [7] doi:10.3389/fninf.2022.970372
- Effects of individualized brain anatomies and EEG electrode positions on inferred activity of the primary auditory cortex.Journal: Frontiers in neuroinformaticsIn common: EEG, 6 references
- [8] doi:10.1162/imag.a.1073 [code]
- Data-driven head model individualization from digitized electrode positions or photogrammetry improves M/
EEG source localization accuracy. Journal: Imaging neuroscience (Cambridge, Mass.)In common: SciPy, NumPy, EEG, 5 references - [9] doi:10.3389/fnins.2024.1237245 [code]
- CiftiStorm pipeline: facilitating reproducible EEG/
MEG source connectomics. Journal: Frontiers in neuroscienceIn common: SciPy, Matplotlib, EEG, 5 references - [10] doi:10.1073/pnas.2315167121 [code]
- Space wandering in the rodent default mode network.Journal: Proceedings of the National Academy of Sciences of the United States of AmericaIn common: pandas, SciPy, Matplotlib, 1 other tool, rat, 2 references
Contribute
The authors of this paper can claim it, correct its record and validate its tracing map, and the maintainers of its code (its owner, or a public member of its organization) correct what it says of their repository; anyone signed in can ask for its removal. Every request goes to OSCR's own machine, which answers it; your account page follows them.
Sign in with ORCID to claim this paper as one of its authors, correct its record or validate its tracing map: when the paper's metadata lists your ORCID iD, you are recognized at once. Maintainers of its code: sign in with GitHub, then claim the repository on your account page.
Claim this paper
Correct its record
Say what each link of this record is, remove the ones that are not the paper's, add the ones that are missing. The correction becomes a new version of the record, in its Versions section.
Validate its tracing map
You validate the map as this page shows it: 1 repository of the authors' code, each at its verified commit and with its license, 3 scripts, and 2 matches between paragraphs and code (see the Code and Map sections). It then receives a DOI on Zenodo, with you (your ORCID iD) and OSCR as its creators; the code itself is not deposited.
The map's fingerprint: sha256:54ad5feafbdc69df…
Add the badge to the code's README
If you are an author or a maintainer of this paper's code, you can add this badge. It says what OSCR knows of the paper (its code, its validated tracing map) and links the code to this page. Paste one of these snippets under the README's title. Keep the two marks around it, so that the badge can be replaced in place and is never added twice. OSCR changes nothing in your repository.
Markdown
<!-- oscr-badge:start -->
[](https://openscicode.org/badge/doi/10.1038/s41598-026-58885-1)
<!-- oscr-badge:end -->reStructuredText
.. oscr-badge:start
.. image:: https://openscicode.org/badge/doi/10.1038/s41598-026-58885-1.svg
:target: https://openscicode.org/badge/doi/10.1038/s41598-026-58885-1
:alt: OSCR
.. oscr-badge:endHTML
<!-- oscr-badge:start -->
<a href="https://openscicode.org/badge/doi/10.1038/s41598-026-58885-1"><img src="https://openscicode.org/badge/doi/10.1038/s41598-026-58885-1.svg" alt="OSCR"></a>
<!-- oscr-badge:end -->On GitHub, open the README, choose Edit (the pencil), paste the snippet under the title, then "Commit changes".
If you choose to, you can have the badge kept up to date for you, with oscr badge --write from the command line or with the GitHub Action in your repository's workflows. Every other form and option (a card, AsciiDoc, LaTeX, shields.io) is on the badge page.
Request its removal
To ask OSCR to remove this record, the copies of its authors' scripts or its tracing map, use the removal request page: signed in, you say who you are, what to remove and why, then review and confirm the request. Published rules decide every request (how).
Discussion, reproductions, activity
Discussion: code errors and mismatches between the code and the paper about this paper and its code, from readers and its authors, beside the paper and its tracing map.
Report a mismatch between the code and the paper · Report a code error (signed in)
Reproductions: reports from readers who ran the authors' code and did not get the paper's result, what they ran, with which environment, commit and data.
Report a reproduction failure (signed in)
Versions of its code: the releases of its code tied to a version of this paper (the preprint, the accepted manuscript, the version of record…), each with the tracing map versioned with it.
Activity: what happens around this paper: new versions of its record, its map's validation, discussions and reproductions. It opens with sign-in.
