SOX12 and DELTA mediate ecdysone-driven adult neural cell proliferation during metamorphosis
The 1 match
- [1] § Experimental Procedures › RNA-seq data analysis ↔ src/process_argv.cpp, lines 1013 to 1150 · score 0.52 · SOAPnuke, contamination, adapters, threshold, quality, raw · Report a mismatch
Paper
Loaded from Europe PMC by your browser; OSCR does not store it: doi.org · Europe PMC
The paper is loaded when this pane is shown.
The authors' code
C++ · 1,638 lines · 53 KB · GPL-3.0 · 1 match
- #include "process_argv.h"
- #include <stdlib.h>
- #include <iostream>
- #include <stdio.h>
- #include <getopt.h>
- #include <map>
- #include <fstream>
- #include "global_parameter.h"
- #include "sys/sysinfo.h"
- // #include <string>
- using namespace ::std;
- #define ADA_RATIO 0.4
- map<string, vector<string>> wrong_paras;
- void check_module(int argc, char *argv[])
- {
- if (argc < 2)
- {
- printModule();
- }
- else
- {
- set<string> modules;
- modules.insert("filter");
- modules.insert("filtersRNA");
- modules.insert("filterMeta");
- #ifdef _PROCESSHTS
- modules.insert("filterHts");
- #endif
- modules.insert("filterStLFR");
- string module = argv[1];
- if (modules.find(module) == modules.end())
- {
- if (module == "-h" || module == "--help")
- {
- printModule();
- }
- else if (module == "-v" || module == "--version")
- {
- printVersion();
- }
- else
- {
- if (module == "filterHts")
- {
- cout
- << "Error:filterHts module not installed, please re-make after set USEHTS true in Makefile, details see Install part in Readme"
- << endl;
- }
- cerr << "Error:no such module,type -h/--help for help" << endl;
- exit(1);
- }
- }
- else
- {
- if (argc == 2)
- {
- if (module == "filterHts")
- {
- printHtsUsage();
- }
- else
- {
- printUsage(module);
- }
- }
- }
- }
- }
- int global_parameter_initial(int argc, char *argv[], C_global_parameter &gp)
- {
- // const char *shortOptions = "f:r:1:2:K:M:A:l:T:q:n:m:p:d3in:N:t:e:c:SO:P:Q:L:I:G:a:o:C:D:R:W:5:6:7:8:9:Eb:x:y:z:hv";
- string c_module(argv[1]);
- // const char *shortOptions ="j1:2:R:W:C:D:o:5:8:E:Jaf:r:Z:z:c:d:k:Y:K:F:iQ:G:l:q:m:x:y:n:p:g:X:t:B:O:P:7e:T:3:4:L:w:M:A:9:S:s:U:u:b:0:hv";
- const char *shortOptions = "j1:2:C:D:o:c:E:Jf:r:l:q:m:x:y:n:p:g:X:t:T:3:4:L:w:hv";
- // move some uncommonly used parameters to config file
- // include RW58aZzYcdkKFiBOP7eMA9SsUub0QG
- const struct option longOptions[] = {
- // common parameter
- // input and output file
- //{"mode",1,NULL,'E'},
- {"streaming", 0, NULL, 'j'},
- {"fq1", 1, NULL, '1'},
- {"fq2", 1, NULL, '2'},
- // { "trimFq1" , 1, NULL, 'R' },//uncommonly used parameters
- // { "trimFq2" , 1, NULL, 'W' },//uncommonly used parameters
- {"cleanFq1", 1, NULL, 'C'},
- {"cleanFq2", 1, NULL, 'D'},
- {"outDir", 1, NULL, 'o'},
- {"configFile", 1, NULL, 'c'},
- // input and output file type
- // { "seqType" , 1, NULL, '5' },//uncommonly used parameters
- // {"outFileType",1,NULL,'8'},//uncommonly used parameters
- // reference for cram input
- {"ref", 1, NULL, 'E'},
- {"ada_trim", 0, NULL, 'J'},
- // {"contam_trim",0,NULL,'a'},//uncommonly used parameters
- {"adapter1", 1, NULL, 'f'},
- {"adapter2", 1, NULL, 'r'},
- // { "contam1" , 1, NULL, 'Z' },//uncommonly used parameters
- // { "contam2" , 1, NULL, 'z' },//uncommonly used parameters
- // { "ctMatchR" , 1,NULL,'Y'},//uncommonly used parameters
- //
- // { "global_contams",1,NULL,'c'},//uncommonly used parameters
- // //uncommonly used parameters
- // { "glob_cotm_mR",1,NULL,'d'},//uncommonly used parameters
- // { "glob_cotm_mM",1,NULL,'k'},//uncommonly used parameters
- // { "tile" , 1, NULL, 'K' },//uncommonly used parameters
- // { "fov" , 1, NULL, 'F' },//uncommonly used parameters
- // //index remove
- // { "index" , 0, NULL, 'i' },//uncommonly used parameters
- //
- // //base quality
- // { "qualSys" , 1, NULL, 'Q' },//uncommonly used parameters
- // { "outQualSys" , 1, NULL, 'G' },//uncommonly used parameters
- {"lowQual", 1, NULL, 'l'},
- {"qualRate", 1, NULL, 'q'},
- {"mean", 1, NULL, 'm'},
- {"trimBadHead", 1, NULL, 'x'},
- {"trimBadTail", 1, NULL, 'y'},
- // base content
- {"nRate", 1, NULL, 'n'},
- {"highA", 1, NULL, 'p'},
- {"polyG_tail", 1, NULL, 'g'},
- {"polyX", 1, NULL, 'X'},
- {"trim", 1, NULL, 't'},
- // { "TtoU" , 0, &TtoU, 1 },
- // { "UtoT" , 0, &UtoT, 1 },
- // {"baseConvert",1,NULL,'B'},//uncommonly used parameters
- // //{ "small" , 0, NULL, 'S' },
- // //PE reads
- // { "overlap" , 1, NULL, 'O' },//uncommonly used parameters
- // { "mis" , 1, NULL, 'P' },//uncommonly used parameters
- // { "pe_info" , 0, NULL, '7' },//uncommonly used parameters
- // //computer resource
- // { "patch" , 1, NULL, 'e' },//uncommonly used parameters
- {"thread", 1, NULL, 'T'},
- //{ "split_line",1,NULL, '6'},
- // read length limit
- // {"maxReadLen",1,NULL,'3'},//uncommonly used parameters
- {"minReadLen", 1, NULL, '4'},
- // reads number limit
- // {"'totalReadsNum'" , 1, NULL, 'c' },
- // {"totalReadsNum",1,NULL,'L'},
- {"output_clean", 1, NULL, 'w'},
- // {"adaMis",1,NULL,'M'},//uncommonly used parameters
- // {"adaMR",1,NULL,'A'},//uncommonly used parameters
- // {"adaEdge",1,NULL,'9'},//uncommonly used parameters
- //
- // {"adaRCtg",1,NULL,'S'},//uncommonly used parameters
- // {"adaRAr",1,NULL,'s'},//uncommonly used parameters
- // {"adaRMa",1,NULL,'U'},//uncommonly used parameters
- // {"adaREr",1,NULL,'u'},//uncommonly used parameters
- // {"adaRMm",1,NULL,'b'},//uncommonly used parameters
- // { "append" , 1, NULL, 'a' },
- // { "log",1,NULL,'0'},//uncommonly used parameters
- {"help", 0, NULL, 'h'},
- {"version", 0, NULL, 'v'},
- {0, 0, 0, 0}};
- int nextOpt;
- gp.module_name = argv[1];
- if (gp.module_name == "filtersRNA")
- {
- gp.min_read_length = 18;
- gp.max_read_length = 49;
- }
- gp.log = "log";
- // int error=0;
- while (-1 != (nextOpt = getopt_long(argc, argv, shortOptions, longOptions, NULL)))
- {
- switch (nextOpt)
- {
- case 'E':
- gp.reference.assign(optarg);
- break;
- case 'j':
- gp.is_streaming = true;
- break;
- case '1':
- {
- gp.fq1_path.assign(optarg);
- if (gp.fq1_path.rfind(".gz") == gp.fq1_path.size() - 3)
- {
- gp.inputGzformat = true;
- }
- else
- {
- gp.inputGzformat = false;
- }
- break;
- }
- case '2':
- gp.fq2_path.assign(optarg);
- break;
- // case 'R':{
- // gp.trim_fq1.assign(optarg);
- // if(gp.trim_fq1.rfind(".gz")==gp.trim_fq1.size()-3){
- // gp.trimOutGzformat=true;
- // }else{
- // gp.trimOutGzformat=false;
- // }
- // break;
- // }
- // case 'W':gp.trim_fq2.assign(optarg);break;
- case 'C':
- {
- gp.clean_fq1.assign(optarg);
- if (gp.clean_fq1.rfind(".gz") == gp.clean_fq1.size() - 3)
- {
- gp.cleanOutGzFormat = true;
- }
- else
- {
- gp.cleanOutGzFormat = false;
- }
- break;
- }
- case 'D':
- gp.clean_fq2.assign(optarg);
- break;
- case 'o':
- gp.output_dir.assign(optarg);
- break;
- // case '5':gp.seq_type.assign(optarg);break;
- // case '8':gp.output_file_type.assign(optarg);break;
- case 'J':
- gp.adapter_discard_or_trim = "trim";
- break;
- // case 'a':gp.contam_discard_or_trim="trim";break;
- case 'f':
- {
- string validSeq = "ACGTacgtNn";
- ifstream ifAda1(optarg);
- if (!ifAda1)
- {
- gp.adapter1_seq.assign(optarg);
- gp.ada1s.push_back(gp.adapter1_seq);
- for (int i = 0; i < gp.adapter1_seq.size(); i++)
- {
- if (validSeq.find(gp.adapter1_seq[i]) == string::npos)
- {
- cerr << "Error:invalid character found in adapter:" << gp.adapter1_seq[i]
- << ". Only ACGTacgtNn are supported" << endl;
- exit(1);
- }
- }
- break;
- }
- else
- {
- cout << "input adapter1 list file:" << optarg << endl;
- string adaLine;
- while (getline(ifAda1, adaLine))
- {
- gp.ada1s.push_back(adaLine);
- }
- }
- ifAda1.close();
- break;
- }
- case 'r':
- {
- // gp.adapter2_seq.assign(optarg);break;
- string validSeq = "ACGTacgtNn";
- ifstream ifAda2(optarg);
- if (!ifAda2)
- {
- gp.adapter2_seq.assign(optarg);
- gp.ada2s.push_back(gp.adapter2_seq);
- for (int i = 0; i < gp.adapter2_seq.size(); i++)
- {
- if (validSeq.find(gp.adapter2_seq[i]) == string::npos)
- {
- cerr << "Error:invalid character found in adapter:" << gp.adapter2_seq[i]
- << ". Only ACGTacgtNn are supported" << endl;
- exit(1);
- }
- }
- break;
- }
- else
- {
- cout << "input adapter2 list file:" << optarg << endl;
- string adaLine;
- while (getline(ifAda2, adaLine))
- {
- gp.ada2s.push_back(adaLine);
- }
- }
- ifAda2.close();
- break;
- }
- // case 'Z':gp.contam1_seq.assign(optarg);break;
- case 'z':
- gp.contam2_seq.assign(optarg);
- break;
- // case 'c':gp.global_contams.assign(optarg);break;
- case 'c':
- initFromConfigFile(gp, optarg);
- break; //-c means config file path ,no longer for global contams
- // case 'd':gp.g_mrs.assign(optarg);break;
- // case 'k':gp.g_mms.assign(optarg);break;
- // case 'Y':gp.ctMatchR.assign(optarg);break;
- // case 'K':gp.tile.assign(optarg);break;
- // case 'F':gp.fov.assign(optarg);break;
- // case 'i':gp.index_remove = true;break;
- // case 'Q':{
- // gp.qualityPhred=atoi(optarg);
- // if(gp.qualityPhred==1){
- // gp.qualityPhred=64;
- // }else if(gp.qualityPhred==2){
- // gp.qualityPhred=33;
- // }
- // break;
- // }
- // case 'G':{
- // gp.outputQualityPhred=atoi(optarg);
- // if(gp.outputQualityPhred==1){
- // gp.outputQualityPhred=64;
- // }else if(gp.outputQualityPhred==2){
- // gp.outputQualityPhred=33;
- // }
- // break;
- // }
- case 'l':
- gp.lowQual = atoi(optarg);
- break;
- case 'q':
- gp.lowQualityBaseRatio = atof(optarg);
- break;
- case 'm':
- gp.meanQuality = atoi(optarg);
- break;
- case 'x':
- gp.trimBadHead.assign(optarg);
- break;
- case 'y':
- gp.trimBadTail.assign(optarg);
- break;
- case 'n':
- gp.n_ratio = atof(optarg);
- break;
- case 'p':
- gp.highA_ratio = atof(optarg);
- break;
- case 'g':
- gp.polyG_tail = atof(optarg);
- break;
- case 'X':
- gp.polyX_num = atof(optarg);
- break;
- case 't':
- gp.trim.assign(optarg);
- break;
- // case 'B':gp.base_convert.assign(optarg);break;
- // case 'O':gp.overlap_length=atoi(optarg);break;
- // case 'P':gp.peMismatchRatio=atof(optarg);break;
- // case '7':gp.whether_add_pe_info=true;break;
- // case 'e':gp.patchSize=atoi(optarg);break;
- case 'T':
- gp.threads_num = atoi(optarg);
- break;
- // case '6':gp.split_line=atoi(optarg);break;
- // case '3':gp.max_read_length=atoi(optarg);break;
- case '4':
- gp.min_read_length = atoi(optarg);
- break;
- // case 'L':{
- // string tmp_str;
- // tmp_str.assign(optarg);
- // if(tmp_str.find("head")==string::npos){
- // gp.total_reads_num_random=true;
- // //gp.catWhenrunning=false;
- // for(int i=0;i!=tmp_str.size();i++){
- // if(!isdigit(tmp_str[i]) && tmp_str[i]!='.'){
- // cerr<<"Error:-L value should be a positive integer or float"<<endl;
- // exit(1);
- // }
- // }
- // }else{
- // gp.total_reads_num_random=false;
- // tmp_str.erase(tmp_str.find("head"),4);
- // if(tmp_str.find(".")!=string::npos){
- // cerr<<"Error:-L value should be a integer when with head suffix"<<endl;
- // exit(1);
- // }else{
- // for(int i=0;i!=tmp_str.size();i++){
- // if(!isdigit(tmp_str[i])){
- // cerr<<"Error:-L value should be an integer when with head suffix"<<endl;
- // exit(1);
- // }
- // }
- // }
- // }
- //
- // float tmp_val=atof(optarg);
- // if(tmp_val==0){
- // cerr<<"Error:-L value should be a positive integer or float"<<endl;
- // exit(1);
- // }
- // gp.total_reads_num=tmp_val;
- // if(tmp_val<1){
- // gp.f_total_reads_ratio=tmp_val;
- // }else{
- // istringstream is_str(tmp_str);
- // is_str>>gp.l_total_reads_num;
- // }
- // if(gp.f_total_reads_ratio>0 && gp.l_total_reads_num>0){
- // cerr<<"Error:reads number and ratio should not be both assigned at the same time"<<endl;
- // exit(1);
- // }
- // break;
- // }
- case 'w':
- {
- string paraCheck(optarg);
- for (int i = 0; i != paraCheck.size(); i++)
- {
- if (!isdigit(paraCheck[i]))
- {
- cerr << "Error:-w value should be a positive integer" << endl;
- exit(1);
- }
- }
- gp.cleanOutSplit = atoi(paraCheck.c_str());
- if (gp.cleanOutSplit == 0)
- {
- cerr << "Error:-w value should be a positive integer" << endl;
- exit(1);
- }
- break;
- }
- // case 'M':{
- // wrong_paras["filtersRNA"].emplace_back("-M|--adaMis");
- // string tmp_str;
- // tmp_str.assign(optarg);
- // if(tmp_str.find(",")==string::npos){
- // gp.adaMis=atoi(optarg);
- // gp.adaMis2=gp.adaMis;
- // }else{
- // vector<string> values;
- // line_split(tmp_str,',',values);
- // if(values.size()<2){
- // cerr<<"Error:expected two values in -M parameter"<<endl;
- // exit(1);
- // }
- // gp.adaMis=atoi(values[0].c_str());
- // gp.adaMis2=atoi(values[1].c_str());
- // }
- // break;
- // }
- // case 'A':{
- // wrong_paras["filtersRNA"].emplace_back("-A|adaMR");
- // string tmp_str;
- // tmp_str.assign(optarg);
- // if(tmp_str.find(",")==string::npos){
- // gp.adaMR=atof(optarg);
- // gp.adaMR2=gp.adaMR;
- // }else{
- // vector<string> values;
- // line_split(tmp_str,',',values);
- // if(values.size()<2){
- // cerr<<"Error:expected two values in -A parameter"<<endl;
- // exit(1);
- // }
- // gp.adaMR=atof(values[0].c_str());
- // gp.adaMR2=atof(values[1].c_str());
- // }
- // break;
- // }
- // case '9':{
- // wrong_paras["filtersRNA"].emplace_back("-9|--adaEdge");
- // string tmp_str;
- // tmp_str.assign(optarg);
- // if(tmp_str.find(",")==string::npos){
- // gp.adaEdge=atoi(optarg);
- // gp.adaEdge2=gp.adaEdge;
- // }else{
- // vector<string> values;
- // line_split(tmp_str,',',values);
- // if(values.size()<2){
- // cerr<<"Error:expected two values in -9 parameter"<<endl;
- // exit(1);
- // }
- // gp.adaEdge=atoi(values[0].c_str());
- // gp.adaEdge2=atoi(values[1].c_str());
- // }
- // break;
- // }
- // case 'S':gp.adaRCtg=atoi(optarg);wrong_paras["filter"].emplace_back("-S|--adaRCtg");break;
- // case 's':gp.adaRAr=atof(optarg);wrong_paras["filter"].emplace_back("-s|--adaRAr");break;
- // case 'U':gp.adaRMa=atoi(optarg);wrong_paras["filter"].emplace_back("-U|--adaRMa");break;
- // case 'u':gp.adaREr=atof(optarg);wrong_paras["filter"].emplace_back("-u|--adaREr");break;
- // case 'b':gp.adaRMm=atoi(optarg);wrong_paras["filter"].emplace_back("-b|--adaRMm");break;
- // // case 'd':gp.rmdup = true;break;
- // case '0':gp.log.assign(optarg);break;
- case 'v':
- printVersion();
- return 1;
- case 'h':
- printUsage(c_module);
- return 1;
- default:
- {
- exit(1);
- }
- }
- }
- if (argc != optind + 1)
- {
- cerr << "Error:please check the options" << endl;
- exit(1);
- }
- if (!gp.rmdup || gp.cleanOutSplit <= 0)
- {
- }
- else
- {
- cerr << "Warning:generating split files(-w was set) would become slower when rmdup function was on" << endl;
- }
- if (gp.log.find("/") == string::npos)
- {
- gp.log = gp.output_dir + "/" + gp.log;
- }
- if (gp.fq1_path.rfind(".gz") != gp.fq1_path.size() - 3)
- {
- gp.mode = "ssd";
- }
- if (gp.patchSize == 0)
- {
- gp.patchSize = gp.threads_num * 20000 / 8;
- }
- /*
- int min_adapter_length=gp.adapter1_seq.size()>gp.adapter2_seq.size()?gp.adapter2_seq.size():gp.adapter1_seq.size();
- if(min_adapter_length>20){
- gp.adaEdge=min_adapter_length*ADA_RATIO;
- }
- */
- return 0;
- }
- bool check_parameter(int argc, char *argv[], C_global_parameter &gp)
- {
- // 对于filterHts模块不再做检查
- bool pe_data = false;
- if (gp.module_name != "filterHts")
- {
- if (!gp.fq1_path.empty())
- {
- if (file_exist_and_not_empty(gp.fq1_path) == 0)
- {
- cerr << "Error:input fastq1 is required" << endl;
- exit(1);
- }
- }
- else
- {
- cerr << "Error:input fastq1 is required" << endl;
- exit(1);
- }
- if (gp.output_dir.empty())
- {
- cerr << "Error:output directory is required" << endl;
- exit(1);
- }
- if (!gp.fq2_path.empty())
- {
- pe_data = true;
- if (file_exist_and_not_empty(gp.fq2_path) == 0)
- {
- cerr << "Error:input fastq2 is required" << endl;
- exit(1);
- }
- if (gp.fq1_path == gp.fq2_path)
- {
- cerr << "Error:input fq1 and fq2 are the same,please check the parameters" << endl;
- exit(1);
- }
- }
- if (gp.clean_fq1.empty())
- {
- cerr << "Error:output clean fastq is required" << endl;
- exit(1);
- }
- else
- {
- if (pe_data)
- {
- if (gp.clean_fq2.empty())
- {
- cerr << "Error:output clean fastq2 is required" << endl;
- exit(1);
- }
- if (!(
- gp.clean_fq1.rfind(".gz") == gp.clean_fq1.size() - 3 && gp.clean_fq2.rfind(".gz") == gp.clean_fq2.size() - 3) &&
- !(
- gp.clean_fq1.rfind(".gz") != gp.clean_fq1.size() - 3 && gp.clean_fq2.rfind(".gz") != gp.clean_fq2.size() - 3))
- {
- cerr << "Error:the format of clean fastq1 is inconsistent with fastq2" << endl;
- exit(1);
- }
- if (gp.cleanOutSplit > 0 || gp.total_reads_num > 0)
- {
- if (gp.clean_fq1.rfind(".gz") != gp.clean_fq1.size() - 3 && gp.clean_fq2.rfind(".gz") != gp.clean_fq2.size() - 3)
- {
- cerr << "Error:the clean out fastq should be non-gz format when clean output reads are limited"
- << endl;
- exit(1);
- }
- }
- }
- }
- if (!pe_data && gp.module_name != "filtersRNA")
- {
- if (!gp.adapter2_seq.empty())
- {
- cerr << "Error:no need adapter2" << endl;
- exit(1);
- }
- }
- if (!pe_data)
- {
- if (!gp.trim_fq2.empty() || !gp.clean_fq2.empty())
- {
- cerr << "Error:input file is not pe data" << endl;
- exit(1);
- }
- }
- else
- {
- if (!(
- gp.fq1_path.rfind(".gz") == gp.fq1_path.size() - 3 && gp.fq2_path.rfind(".gz") == gp.fq2_path.size() - 3) &&
- !(
- gp.fq1_path.rfind(".gz") != gp.fq1_path.size() - 3 && gp.fq2_path.rfind(".gz") != gp.fq2_path.size() - 3))
- {
- cerr << "Error:the format of input fastq1 is inconsistent with fastq2" << endl;
- exit(1);
- }
- }
- if (gp.seq_type != "0" && gp.seq_type != "1")
- {
- cerr << "Error:seq_type value should be 0 or 1" << endl;
- exit(1);
- }
- if (gp.output_file_type != "fastq" && gp.output_file_type != "fasta")
- {
- cerr << "Error:output_file_type value should be fastq or fasta" << endl;
- exit(1);
- }
- }
- if (gp.module_name == "filterStLFR")
- {
- // check barcode list file
- if (gp.barcodeListPath == "")
- {
- cerr << "Error:barcode list not assigned" << endl;
- exit(1);
- }
- else
- {
- ifstream bl(gp.barcodeListPath);
- if (!bl)
- {
- cerr << "Error:cannot open such file," << gp.barcodeListPath << endl;
- exit(1);
- }
- bl.close();
- }
- // check barcode region format
- if (gp.barcodeRegionStr.find("_") == string::npos)
- {
- cerr << "Error:barcode region format error, it should be set as 101_10,117_10,133_10" << endl;
- exit(1);
- }
- else
- {
- vector<string> eles;
- line_split(gp.barcodeRegionStr, ',', eles);
- if (eles.size() != 3)
- {
- cerr << "Error:barcode region format error, it should be set as 101_10,117_10,133_10" << endl;
- exit(1);
- }
- for (vector<string>::iterator ix = eles.begin(); ix != eles.end(); ix++)
- {
- vector<string> eles2;
- line_split(*ix, '_', eles2);
- if (eles2.size() != 2)
- {
- cerr << "Error:barcode region format error, it should be set as 101_10,117_10,133_10" << endl;
- exit(1);
- }
- }
- }
- }
- if (!gp.adapter_discard_or_trim.empty())
- {
- if (gp.adapter_discard_or_trim != "trim" && gp.adapter_discard_or_trim != "discard")
- {
- cerr << "Error:adapter_discard_or_trim value should be trim or discard" << endl;
- exit(1);
- }
- }
- if (!gp.tile.empty())
- {
- if (gp.tile.find("-") != string::npos)
- {
- vector<string> tmp_eles;
- line_split(gp.tile, '-', tmp_eles);
- string start, end;
- for (string::size_type ix = tmp_eles[0].size() - 1; ix >= 0; ix--)
- {
- if (!isalpha(tmp_eles[0][ix]))
- {
- start.insert(start.begin(), tmp_eles[0][ix]);
- }
- }
- for (string::size_type ix = tmp_eles[1].size() - 1; ix >= 0; ix--)
- {
- if (!isalpha(tmp_eles[1][ix]))
- {
- end.insert(end.begin(), tmp_eles[1][ix]);
- }
- }
- if (atoi(start.c_str()) > atoi(end.c_str()))
- {
- cerr << "Error:tile value format error" << endl;
- exit(1);
- }
- }
- for (string::size_type ix = 0; ix != gp.tile.size(); ix++)
- {
- if (!isalnum(gp.tile[ix]) && gp.tile[ix] != '-' && gp.tile[ix] != ',')
- {
- cerr << "Error:tile value format error" << endl;
- exit(1);
- }
- }
- }
- if (gp.qualityPhred != 64 && gp.qualityPhred != 33)
- {
- cerr << "Error:qualityPhred value error" << endl;
- exit(1);
- }
- if (gp.outputQualityPhred != 64 && gp.outputQualityPhred != 33)
- {
- cerr << "Error:outputQualityPhred value error" << endl;
- exit(1);
- }
- if (gp.module_name == "filter" || gp.module_name == "filterMeta")
- {
- if (wrong_paras["filter"].size() > 0)
- {
- cerr << "Error:these parameters should not appear in the module," << join_vector(wrong_paras["filter"], ',')
- << endl;
- exit(1);
- }
- }
- else
- {
- if (gp.module_name == "filtersRNA")
- {
- // adaMis,adaMR;
- if (wrong_paras["filtersRNA"].size() > 0)
- {
- cerr << "Error:these parameters should not appear in the module,"
- << join_vector(wrong_paras["filtersRNA"], ',') << endl;
- exit(1);
- }
- }
- }
- if (gp.cleanOutSplit != 0 && gp.cleanOutSplit < gp.patchSize)
- {
- cerr << "Error: output reads in each clean fastq file(-w) should be more than patch size(-e)" << endl;
- exit(1);
- }
- if (gp.module_name != "filterHts")
- {
- if (!gp.trim.empty())
- {
- vector<string> tmp_eles;
- line_split(gp.trim, ',', tmp_eles);
- if (pe_data)
- {
- if (tmp_eles.size() != 4)
- {
- cerr << "Error:trim value format error" << endl;
- exit(1);
- }
- }
- else
- {
- if (tmp_eles.size() != 2)
- {
- cerr << "Error:trim value format error" << endl;
- exit(1);
- }
- }
- for (int i = 0; i < gp.trim.size(); i++)
- {
- if (!isdigit(gp.trim[i]) && gp.trim[i] != ',')
- {
- cerr << "Error:trim value format error:" << gp.trim << endl;
- cerr << "e.g.: -t 10 2 10 2" << endl;
- exit(1);
- }
- }
- }
- if (!gp.trimBadHead.empty())
- {
- vector<string> tmp_eles;
- line_split(gp.trimBadHead, ',', tmp_eles);
- if (pe_data)
- {
- if (tmp_eles.size() != 2)
- {
- cerr << "Error:trimBadHead value format error" << endl;
- exit(1);
- }
- }
- else
- {
- if (tmp_eles.size() != 1)
- {
- cerr << "Error:trimBadHead value format error" << endl;
- exit(1);
- }
- }
- }
- if (!gp.trimBadTail.empty())
- {
- vector<string> tmp_eles;
- line_split(gp.trimBadTail, ',', tmp_eles);
- if (pe_data)
- {
- if (tmp_eles.size() != 2)
- {
- cerr << "Error:trimBadTail value format error" << endl;
- exit(1);
- }
- }
- else
- {
- if (tmp_eles.size() != 1)
- {
- cerr << "Error:trimBadTail value format error" << endl;
- exit(1);
- }
- }
- }
- }
- if (!gp.base_convert.empty())
- {
- set<string> acgt_s;
- string tmp_s = "ACGTacgt";
- string tmp_single;
- for (string::size_type ix = 0; ix != tmp_s.size(); ix++)
- {
- tmp_single.insert(tmp_single.end(), tmp_s[ix]);
- acgt_s.insert(tmp_single);
- tmp_single = "";
- }
- if (gp.base_convert.find("TO") == string::npos && gp.base_convert.find("2") == string::npos)
- {
- cerr << "Error:base_convert value format error" << endl;
- exit(1);
- }
- else
- {
- string firstC = gp.base_convert.substr(0, 1);
- string lastC = gp.base_convert.substr(gp.base_convert.size() - 1, 1);
- if (acgt_s.find(firstC) == acgt_s.end() || acgt_s.find(lastC) == acgt_s.end())
- {
- cerr << "Error:base_convert value format error" << endl;
- exit(1);
- }
- }
- }
- if (gp.cleanOutSplit > 0 && gp.total_reads_num > 0)
- {
- cerr << "Error:-w and -L cannot be both assigned" << endl;
- exit(1);
- }
- if (gp.cleanOutSplit > 0)
- {
- gp.clean_file_reads = gp.cleanOutSplit;
- }
- else if (gp.l_total_reads_num > 0)
- {
- gp.clean_file_reads = gp.l_total_reads_num;
- }
- if (gp.threads_num > get_nprocs())
- {
- gp.threads_num = get_nprocs();
- cerr << "Warning:threads number exceeds the system cpu number" << endl;
- // exit(1);
- }
- if (gp.patchSize > 5000000)
- {
- cerr << "Error:patchSize cannot exceed 5M considering memory usage" << endl;
- exit(1);
- }
- return 0;
- }
- void printModule()
- {
- cout << endl;
- cout << "Program: SOAPnuke\n";
- cout << "Version: " << PACKAGEVERSION << "." << MINORVERSION << endl;
- cout << "Contact: GongChun<[email hidden]> ChenYuXin<[email hidden]>" << endl;
- cout << "Command:\n";
- cout << " filter preprocessing normal Fastq files\n";
- #ifdef _PROCESSHTS
- cout << " filterHts preprocessing BAM/CRAM files\n";
- #endif
- cout << " filterStLFR preprocessing stLFR Fastq files\n";
- cout << " filtersRNA preprocessing sRNA Fastq files\n";
- // cout << " filterDGE preprocessing DGE sequences\n"; //not include filterDGE in thie version
- cout << " filterMeta preprocessing Meta Fastq files\n";
- cout << endl;
- exit(1);
- }
- void printHtsUsage()
- {
- cout << "Usage: "
- << "filterHts"
- << " [OPTION]... \n";
- cout << "\ncommonly used parameters\n";
- cout << "\t-E, --ref\t\tFILE\t\treference file(required when process cram format)\n";
- cout << "\t-1, \t\t\tFILE\t\tinput bam/cram file(required)\n";
- cout << "\t-2, \t\t\tFILE\t\toutput bam/cram file(required)\n";
- cout << "\t-o, --outDir\tSTR\t\toutput directory, directory must exists\n";
- cout << "\n";
- cout << "\t-f, --adapter1\t\tSTR\t\tadapter sequence or list file of read1\n";
- cout << "\t-r, --adapter2\t\tSTR\t\tadapter sequence or list file of read2 (if PE)\n";
- cout << "\t-J, --ada_trim\t\t\t\ttrim read when find adapter[default:discard]\n";
- cout << "\t-T, --thread\t\tINT\t\tthreads number used in process[6]\n";
- cout
- << "\t-c, --configFile\tSTR\t\tconfig file which include uncommonly used parameters. Each line contains a parameter, for value needed parameter: adaMis=2, for bool parameter:contam_trim, which means change mode from discard to trim\n";
- cout << "\t-l, --lowQual\t\tINT\t\tlow quality threshold [default:5]\n";
- cout << "\t-q, --qualRate\t\tFLOAT\t\tlow quality rate [default:0.5]\n";
- cout << "\t-n, --nRate\t\tFLOAT\t\tN rate threshold [default:0.05]\n";
- cout << "\t-m, --mean\t\tFLOAT\t\tfilter reads with low average quality\n";
- cout << "\t-p, --highA\t\tFLOAT\t\tfilter reads if ratio of A in a read exceed [FLOAT]\n";
- cout << "\t-g, --polyG_tail\tFLOAT\t\tfilter reads if found polyG in tail [INT]\n";
- cout << "\t-X, --polyX\t\tINT\t\tfilter reads if a read contains polyX [INT]\n";
- cout << "\t-i, --index\t\t\t\tremove index\n";
- cout
- << "\t-L, --totalReadsNum\tINT/FLOAT\tnumber/fraction of reads you want to keep in the output clean fq file(cannot be assigned when -w is given).\n";
- cout
- << "\t \t\t\t\t\tIt will extract reads randomly through the total clean fq file by default, you also can get the head reads\n";
- cout << "\t \t\t\t\t\tfor save time by add head suffix to the integer(e.g. -L 10000000head)\n";
- cout << "\t-4, --minReadLen\tINT\t\tread min length,default 18 for filtersRNA,30 for other modules\n";
- cout << "\t-h, --help\t\t\t\thelp" << endl;
- cout << "\t-v, --version\t\t\t\tshow version" << endl;
- cout
- << "\tExample: ./SOAPnuke filterHts -l 10 -q 0.1 -n 0.01 -f AAGTCGGAGGCCAAGCGGTCTTAGGAAGACAA -r AAGTCGGATCGTAGCCATGTCGTTCTGTGAGCCAAGGAGTTG --ref chr21.fa -1 input.bam -2 output.cram -o result"
- << endl;
- cout << "\n";
- cout << "uncommonly used parameters, which should be set in config file" << endl;
- // cout << "\tcontam1\t\tSTR\t\tcontaminant sequence(s) for read1, split by comma\n";
- // cout << "\tcontam2\t\tSTR\t\tcontaminant sequence(s) for read2, split by comma\n";
- cout << "\tctMatchR\tFLOAT/STR\tcontam's shortest consistent matching ratio [default:0.2]\n";
- // cout << "\tglobal_contams\tSTR\t\tglobal contaminant sequences which need to be detected, split by comma if more than 1\n";
- // cout << "\tglob_cotm_mR\tSTR\t\tminimum match ratio in global contaminant sequences detection\n";
- // cout << "\tglob_cotm_mM\tSTR\t\tmaximum mismatch number in global contaminant sequences detection\n";
- cout << "\tseqType\t\tINT\t\tSequence fq name type, 0->old fastq name, 1->new fastq name [0]\n";
- cout << "\t\t\t\t\t\t\t\told fastq name: @FCD1PB1ACXX:4:1101:1799:2201#GAAGCACG/2\n";
- cout << "\t\t\t\t\t\t\t\tnew fastq name: @HISEQ:310:C5MH9ANXX:1:1101:3517:2043 2:N:0:TCGGTCAC\n";
- cout << "\ttile\t\tSTR\t\ttile number to ignore reads, such as [1101-1104,1205]\n";
- cout << "\tfov\t\tSTR\t\tfov number to ignore reads (only for zebra-platform data), such as [C001R003,C003R004]\n";
- cout << "\tAdapter related:\n";
- // cout << "\tcontam_trim\t\t\ttrim read when find contam[default:discard]\n";
- cout << "\tadaMis\t\tINT,[INT]\tthe max mismatch number when match the adapter (depend on -f/-r).If different values are required for fq1 and fq2, you can set two values seperated by comma,e.g. 1,2 (same as -A/-9)[1]\n";
- cout << "\tadaMR\t\tFLOAT,[FLOAT]\tadapter's shortest match ratio (depend on -f/-r) [0.5]\n";
- cout << "\tadaEdge\t\tINT,[INT]\tthe min length for segmental alignment [6]\n";
- cout << endl;
- cout << "\toverlap\t\tINT\t\tfilter the small insert size.Not filter until the value exceed 1[-1]\n";
- cout << "\tmis\t\tFLOAT\t\tthe maximum mismatch ratio when find overlap between PE reads(depend on -O)[0.1]\n";
- cout << "\n";
- cout << "\tpatch\t\tINT\t\treads number of a patch processed[400000]\n";
- cout << "\n";
- cout << "\tqualSys\t\tINT\t\tquality system 1:64, 2:33[default:2]\n";
- cout << "\toutQualSys\tINT\t\tout quality system 1:64, 2:33[default:2]\n";
- cout << "\tmaxReadLen\tINT\t\tread max length,default 49 for filtersRNA\n";
- cout << "\n";
- cout << "\tpe_info\t\t\t\tAdd /1, /2 at the end of fastq name.[default:not add]\n";
- cout << "\tbaseConvert\tSTR\t\tconvert base when write data,example:TtoU, means convert base T to base U in the output\n";
- cout << "\tlog\t\tSTR\t\tlog file\n";
- cout << "\n";
- exit(1);
- }
- void printUsage(string c_module)
- {
- cout << "Usage: " << c_module << " [OPTION]... \n";
- cout << "\ncommonly used parameters\n";
- // cout << "\t-E, --mode\t\tSTR\t\tif pigz software is available,you can assign ssd mode for accelerate(-E ssd). Default is non SSD\n";
- cout << "\t-1, --fq1\t\tFILE\t\tfq1 file(required), .gz or normal text format are both supported(required)\n";
- cout << "\t-2, --fq2\t\tFILE\t\tfq2 file(used when process PE data), format should be same as fq1 file, both are gz or both are normal text\n";
- cout << "\t-C, --cleanFq1\t\tSTR\t\treads which passed QC from fq1 file would output to this file\n";
- cout << "\t-D, --cleanFq2\t\tSTR\t\treads which passed QC from fq2 file would output to this file\n";
- cout << "\t-o, --outDir\t\tSTR\t\tOutput directory. Processed fq files and statistical results would be output to here\n";
- cout << "\t-f, --adapter1\t\tSTR\t\tadapter sequence or list file of read1\n";
- cout << "\t-r, --adapter2\t\tSTR\t\tadapter sequence or list file of read2 (if PE)\n";
- cout << "\t-J, --ada_trim\t\t\t\ttrim read when find adapter[default:discard]\n";
- cout << "\t-T, --thread\t\tINT\t\tthreads number used in process[6]\n";
- cout << "\t-c, --configFile\tSTR\t\tconfig file which include uncommonly used parameters. Each line contains a parameter, for value needed parameter: adaMis=2, for bool parameter:contam_trim, which means change mode from discard to trim\n";
- cout << "\t-l, --lowQual\t\tINT\t\tlow quality threshold [default:5]\n";
- cout << "\t-q, --qualRate\t\tFLOAT\t\tlow quality rate [default:0.5]\n";
- cout << "\t-n, --nRate\t\tFLOAT\t\tN rate threshold [default:0.05]\n";
- cout << "\t-m, --mean\t\tFLOAT\t\tfilter reads with low average quality\n";
- cout << "\t-p, --highA\t\tFLOAT\t\tfilter reads if ratio of A in a read exceed [FLOAT]\n";
- cout << "\t-g, --polyG_tail\tFLOAT\t\tfilter reads if found polyG in tail [INT]\n";
- cout << "\t-X, --polyX\t\tINT\t\tfilter reads if a read contains polyX [INT]\n";
- cout << "\t-4, --minReadLen\tINT\t\tread min length,default 18 for filtersRNA,30 for other modules\n";
- cout << "\t-w, --cleanOutSplit\tINT\t\tmax reads number in each output clean fastq file\n";
- cout << "\t-h, --help\t\t\t\thelp" << endl;
- cout << "\t-v, --version\t\t\t\tshow version" << endl;
- if (c_module == "filter")
- {
- cout
- << "\tExample: ./SOAPnuke filter -l 10 -q 0.1 -n 0.01 -f AAGTCGGAGGCCAAGCGGTCTTAGGAAGACAA -r AAGTCGGATCGTAGCCATGTCGTTCTGTGAGCCAAGGAGTTG -1 test.r1.fq.gz -2 test.r2.fq.gz -C clean_1.fq.gz -D clean_2.fq.gz -o result -T 8"
- << endl;
- }
- cout << "\n";
- cout << "uncommonly used parameters, which should be set in config file" << endl;
- // cout << "\tcontam1\t\tSTR\t\tcontaminant sequence(s) for fq1 file, split by comma\n";
- // cout << "\tcontam2\t\tSTR\t\tcontaminant sequence(s) for fq2 file, split by comma. The two parameters is similar to -f/-r, but support a list of sequences\n";
- cout << "\tAdapter related:\n";
- cout << "\tctMatchR\tFLOAT/STR\tcontam's shortest consistent matching ratio [default:0.2]\n";
- // cout << "\tglobal_contams\tSTR\t\tglobal contaminant sequences which need to be detected, split by comma if more than 1\n";
- // cout << "\tglob_cotm_mR\tSTR\t\tminimum match ratio in global contaminant sequences detection\n";
- // cout << "\tglob_cotm_mM\tSTR\t\tmaximum mismatch number in global contaminant sequences detection\n";
- cout << "\tseqType\t\tINT\t\tSequence fq name type, 0->old fastq name, 1->new fastq name [0]\n";
- cout << "\t\t\t\t\t\t\t\told fastq name: @FCD1PB1ACXX:4:1101:1799:2201#GAAGCACG/2\n";
- cout << "\t\t\t\t\t\t\t\tnew fastq name: @HISEQ:310:C5MH9ANXX:1:1101:3517:2043 2:N:0:TCGGTCAC\n";
- cout << "\ttrimFq1\t\tSTR\t\ttrim fq1 file name(gz format)[optional]\n";
- cout
- << "\ttrimFq2\t\tSTR\t\ttrim fq2 file name[optional]. If trim related parameters were set on, these output files would include the total reads which only do trimming. For example, if read A failed QC after trimming, it will still output to -R/-W, but not to -C/-D\n";
- cout << "\ttile\t\tSTR\t\ttile number to ignore reads, such as [1101-1104,1205]\n";
- cout << "\tfov\t\tSTR\t\tfov number to ignore reads (only for zebra-platform data), such as [C001R003,C003R004]\n";
- // cout << "\tcontam_trim\t\t\ttrim read when find contam[default:discard]\n";
- if (c_module == "filter" || c_module == "filtermeta")
- {
- // cout << "filter and filtermeta module adapter related parameter\n";
- cout
- << "\tadaMis\t\tINT,[INT]\tthe max mismatch number when match the adapter (depend on -f/-r).If different values are required for fq1 and fq2, you can set two values seperated by comma,e.g. 1,2 (same as -A/-9)[1]\n";
- cout << "\tadaMR\t\tFLOAT,[FLOAT]\tadapter's shortest match ratio (depend on -f/-r) [0.5]\n";
- cout << "\tadaEdge\t\tINT,[INT]\tthe min length for segmental alignment [6]\n";
- }
- else if (c_module == "filtersRNA")
- {
- // cout << "filtersRNA module adapter related parameter\n";
- cout << " find 5' adapter\n";
- cout << "\tadaRCtg\tINT\t\tmini 5' adapter continuous alignment length (default: 6)\n";
- cout << "\tadaRAr\tFLOAT\t\tmini alignment rate when find 5' adapter: alignment/tag (default: 0.8)\n";
- cout << " find 3' adapter\n";
- cout << "\tadaRMa\tINT\t\tmini alignment length when find 3' adapter (default: 5)\n";
- cout << "\tadaREr\tFLOAT\t\tMax error rate when find 3' adapter (mismatch/match) (default: 0.4)\n";
- cout << "\tadaRMm\tINT\t\tMax mismatch number when find 3' adapter (default: 4)" << endl;
- }
- else if (c_module == "filterStLFR")
- {
- /*if(para=="barcodeListPath"){
- gp.barcodeListPath.assign(value.c_str());
- }
- if(para=="barcodeRegionStr"){
- gp.barcodeRegionStr.assign(value.c_str());
- }
- if(para=="notCutNoLFR"){
- gp.notCutNoLFR=true;
- }*/
- cout << "\tbarcodeListPath\tSTR\t\tbarcode list of two columns:sequence and barcodeID\n";
- cout
- << "\tbarcodeRegionStr\tSTR\t\tbarcode regions, such as: 101_10,117_10,145_10 or 101_10,117_10,133_10\n";
- cout << "\tnotCutNoLFR\t\t\t\tdo not cut sequence when fail found barcode\n";
- cout << "\tinputAsList\t\t\t\tinput file list not a file\n";
- cout << "\ttenX\t\t\t\t\toutput tenX format\n";
- }
- cout << "\toutFileType\tSTR\t\toutput file format: fastq or fasta[fastq]\n";
- cout << endl;
- if (c_module == "filterStLFR" || c_module == "filter")
- {
- cout
- << "\trmdup\t\t\tremove duplicate reads. The function contains a certain false positive rate which means a small number of non-duplicate reads would be marked as duplication, and limited in large reads number\n";
- // cout<<"\tapproximateReadsNum\tSTR/LONG\tapproximate reads number. We suggest you set this parameter if you know. e.g. 100m"<<endl;
- // cout<<"\tmemSizeUsedInRmdup\tSTR/LONG\tmaximum memory size used in rmdup. e.g. 1g\n";
- // cout<<"\texpectedFalsePositive\tFLOAT\texpected false positive rate which means maybe a <expectedFalsePositive> of reads would be marked as duplication which actually not. e.g. 1e-7"<<endl;
- }
- cout << "\tindex\t\t\t\tremove index\n";
- cout
- << "\ttotalReadsNum\tINT/FLOAT\tnumber/fraction of reads you want to keep in the output clean fq file(cannot be assigned when -w is given).\n";
- cout
- << "\t \t\t\t\t\tIt will extract reads randomly through the total clean fq file by default, you also can get the head reads\n";
- cout << "\t \t\t\t\t\tfor save time by add head suffix to the integer(e.g. totalReadsNum=10000000head)\n";
- cout << "\ttrim\t\tINT,INT,INT,INT\n";
- cout
- << "\t \t\t\t\t\ttrim some bp of the read's head and tail, they means: (PE type:read1's head and tail and read2's head and tail [0,0,0,0]; SE type:read head and tail [0,0])\n";
- cout
- << "\ttrimBadHead\tINT,INT\t\tTrim from head ends until meeting high-quality base or reach the length threshold, set (quality threshold,MaxLengthForTrim) [0,0]\n";
- cout
- << "\ttrimBadTail\tINT,INT\t\tTrim from tail ends until meeting high-quality base or reach the length threshold, set (quality threshold,MaxLengthForTrim) [0,0]\n";
- cout << "\n";
- cout << "\toverlap\t\tINT\t\tfilter the small insert size.Not filter until the value exceed 1[-1]\n";
- cout << "\tmis\t\tFLOAT\t\tthe maximum mismatch ratio when find overlap between PE reads(depend on -O)[0.1]\n";
- cout << "\n";
- // cout << "\tsplit_line\tINT\t\tsplit raw fastq by <split_line>, default 10M reads per file (if ssd mode is open)\n";
- cout << "\tpatch\t\tINT\t\treads number of a patch processed[400000]\n";
- cout << "\n";
- cout << "\tqualSys\t\tINT\t\tquality system 1:64, 2:33[default:2]\n";
- cout << "\toutQualSys\tINT\t\tout quality system 1:64, 2:33[default:2]\n";
- cout << "\tmaxReadLen\tINT\t\tread max length,default 49 for filtersRNA\n";
- // cout << "\tcleanOutSplit\tINT\t\tmax reads number in each output clean fastq file\n";
- // cout << "\tappend STR the log's output place : console or file [console]\n";
- cout << "\n";
- cout << "\tpe_info\t\t\t\tAdd /1, /2 at the end of fastq name.[default:not add]\n";
- cout
- << "\tbaseConvert\tSTR\t\tconvert base when write data,example:TtoU, means convert base T to base U in the output\n";
- cout << "\tmaxBaseQuality\tINT\t\tmaximum base quality[42]\n";
- cout << "\tlog\t\tSTR\t\tlog file\n";
- cout << "\n";
- exit(1);
- }
- void printVersion()
- {
- cerr << "SOAPnuke filter tools version " << PACKAGEVERSION << "." << MINORVERSION << "\n";
- exit(1);
- }
- void initFromConfigFile(C_global_parameter &gp, char *configFile)
- {
- set<string> legalParas, boolParas;
- legalParas.insert("trimFq1");
- legalParas.insert("trimFq2");
- legalParas.insert("seqType");
- legalParas.insert("outFileType");
- legalParas.insert("contam_trim");
- legalParas.insert("contam1");
- legalParas.insert("contam2");
- legalParas.insert("ctMatchR");
- legalParas.insert("global_contams");
- legalParas.insert("glob_cotm_mR");
- legalParas.insert("glob_cotm_mM");
- legalParas.insert("tile");
- legalParas.insert("fov");
- legalParas.insert("index");
- legalParas.insert("qualSys");
- legalParas.insert("outQualSys");
- legalParas.insert("baseConvert");
- legalParas.insert("maxBaseQuality");
- legalParas.insert("overlap");
- legalParas.insert("mis");
- legalParas.insert("pe_info");
- legalParas.insert("patch");
- legalParas.insert("maxReadLen");
- legalParas.insert("adaMis");
- legalParas.insert("adaMR");
- legalParas.insert("adaEdge");
- legalParas.insert("adaRCtg");
- legalParas.insert("adaRAr");
- legalParas.insert("adaRMa");
- legalParas.insert("adaREr");
- legalParas.insert("adaRMm");
- legalParas.insert("log");
- legalParas.insert("totalReadsNum");
- legalParas.insert("cleanOutSplit");
- legalParas.insert("trim");
- legalParas.insert("trimBadHead");
- legalParas.insert("trimBadTail");
- // stLFR
- legalParas.insert("barcodeListPath");
- legalParas.insert("barcodeRegionStr");
- legalParas.insert("notCutNoLFR");
- legalParas.insert("inputAsList");
- legalParas.insert("tenX");
- legalParas.insert("rmdup");
- // legalParas.insert("approximateReadsNum");
- // legalParas.insert("memSizeUsedInRmdup");
- // legalParas.insert("expectedFalsePositive");
- boolParas.insert("index");
- boolParas.insert("pe_info");
- boolParas.insert("contam_trim");
- // stLFR
- boolParas.insert("notCutNoLFR");
- boolParas.insert("inputAsList");
- boolParas.insert("tenX");
- boolParas.insert("rmdup");
- string configFilePath(configFile);
- ifstream ifConfig;
- ifConfig.open(configFilePath.c_str());
- if (!ifConfig)
- {
- cerr << "Error:cannot open such file," << configFile << endl;
- exit(1);
- }
- string line;
- while (getline(ifConfig, line))
- {
- string para, value;
- if (line.find("#") == 0)
- {
- continue;
- }
- if (line.find("=") != string::npos)
- {
- vector<string> eles;
- line_split(line, '=', eles);
- if (eles.size() != 2)
- {
- cerr << "Error:unrecgonized format parameter," << line << endl;
- exit(1);
- }
- para = eles[0];
- value = eles[1];
- chomp_space(para, "all");
- chomp_space(value, "all");
- }
- else
- {
- para = line;
- if (boolParas.find(para) == boolParas.end())
- {
- cerr << "Error:this parameter should set a value," << para << endl;
- exit(1);
- }
- }
- if (legalParas.find(para) == legalParas.end())
- {
- cerr << "Error:no such parameter," << para << endl;
- exit(1);
- }
- if (para == "trimFq1")
- {
- gp.trim_fq1.assign(value);
- if (gp.trim_fq1.rfind(".gz") == gp.trim_fq1.size() - 3)
- {
- gp.trimOutGzformat = true;
- }
- else
- {
- gp.trimOutGzformat = false;
- }
- }
- if (para == "trimFq2")
- {
- gp.trim_fq2.assign(value);
- }
- if (para == "seqType")
- {
- gp.seq_type.assign(value);
- }
- if (para == "outFileType")
- {
- gp.output_file_type.assign(value);
- }
- if (para == "contam_trim")
- {
- gp.contam_discard_or_trim = "trim";
- }
- if (para == "contam1")
- {
- gp.contam1_seq.assign(value);
- }
- if (para == "contam2")
- {
- gp.contam2_seq.assign(value);
- }
- if (para == "ctMatchR")
- {
- gp.ctMatchR.assign(value.c_str());
- }
- if (para == "global_contams")
- {
- gp.global_contams.assign(value.c_str());
- }
- if (para == "glob_cotm_mR")
- {
- gp.g_mrs.assign(value.c_str());
- }
- if (para == "glob_cotm_mM")
- {
- gp.g_mms.assign(value.c_str());
- }
- if (para == "tile")
- {
- gp.tile.assign(value.c_str());
- }
- if (para == "fov")
- {
- gp.fov.assign(value.c_str());
- }
- if (para == "index")
- {
- gp.index_remove = true;
- }
- if (para == "qualSys")
- {
- gp.qualityPhred = atoi(value.c_str());
- if (gp.qualityPhred == 1)
- {
- gp.qualityPhred = 64;
- }
- else if (gp.qualityPhred == 2)
- {
- gp.qualityPhred = 33;
- }
- }
- if (para == "outQualSys")
- {
- gp.outputQualityPhred = atoi(value.c_str());
- if (gp.outputQualityPhred == 1)
- {
- gp.outputQualityPhred = 64;
- }
- else if (gp.outputQualityPhred == 2)
- {
- gp.outputQualityPhred = 33;
- }
- }
- if (para == "baseConvert")
- {
- gp.base_convert.assign(value.c_str());
- }
- if (para == "maxBaseQuality")
- {
- gp.maxBaseQuality = atoi(value.c_str());
- }
- if (para == "overlap")
- {
- gp.overlap_length = atoi(value.c_str());
- }
- if (para == "mis")
- {
- gp.peMismatchRatio = atof(value.c_str());
- }
- if (para == "pe_info")
- {
- gp.whether_add_pe_info = true;
- }
- if (para == "patch")
- {
- gp.patchSize = atoi(value.c_str());
- }
- if (para == "maxReadLen")
- {
- gp.max_read_length = atoi(value.c_str());
- }
- if (para == "adaMis")
- {
- wrong_paras["filtersRNA"].emplace_back("-M|--adaMis");
- string tmp_str;
- tmp_str.assign(value.c_str());
- if (tmp_str.find(",") == string::npos)
- {
- gp.adaMis = atoi(value.c_str());
- gp.adaMis2 = gp.adaMis;
- }
- else
- {
- vector<string> values;
- line_split(tmp_str, ',', values);
- if (values.size() < 2)
- {
- cerr << "Error:expected two values in -M parameter" << endl;
- exit(1);
- }
- gp.adaMis = atoi(values[0].c_str());
- gp.adaMis2 = atoi(values[1].c_str());
- }
- }
- if (para == "adaMR")
- {
- wrong_paras["filtersRNA"].emplace_back("-A|adaMR");
- string tmp_str;
- tmp_str.assign(value.c_str());
- if (tmp_str.find(",") == string::npos)
- {
- gp.adaMR = atof(value.c_str());
- gp.adaMR2 = gp.adaMR;
- }
- else
- {
- vector<string> values;
- line_split(tmp_str, ',', values);
- if (values.size() < 2)
- {
- cerr << "Error:expected two values in -A parameter" << endl;
- exit(1);
- }
- gp.adaMR = atof(values[0].c_str());
- gp.adaMR2 = atof(values[1].c_str());
- }
- }
- if (para == "adaEdge")
- {
- wrong_paras["filtersRNA"].emplace_back("-9|--adaEdge");
- string tmp_str;
- tmp_str.assign(value.c_str());
- if (tmp_str.find(",") == string::npos)
- {
- gp.adaEdge = atoi(value.c_str());
- gp.adaEdge2 = gp.adaEdge;
- }
- else
- {
- vector<string> values;
- line_split(tmp_str, ',', values);
- if (values.size() < 2)
- {
- cerr << "Error:expected two values in -9 parameter" << endl;
- exit(1);
- }
- gp.adaEdge = atoi(values[0].c_str());
- gp.adaEdge2 = atoi(values[1].c_str());
- }
- }
- if (para == "adaRCtg")
- {
- gp.adaRCtg = atoi(value.c_str());
- wrong_paras["filter"].emplace_back("-S|--adaRCtg");
- }
- if (para == "adaRAr")
- {
- gp.adaRAr = atof(value.c_str());
- wrong_paras["filter"].emplace_back("-s|--adaRAr");
- }
- if (para == "adaRMa")
- {
- gp.adaRMa = atoi(value.c_str());
- wrong_paras["filter"].emplace_back("-U|--adaRMa");
- }
- if (para == "adaREr")
- {
- gp.adaREr = atof(value.c_str());
- wrong_paras["filter"].emplace_back("-u|--adaREr");
- }
- if (para == "adaRMm")
- {
- gp.adaRMm = atoi(value.c_str());
- wrong_paras["filter"].emplace_back("-b|--adaRMm");
- }
- if (para == "log")
- {
- gp.log.assign(value.c_str());
- }
- if (para == "totalReadsNum")
- {
- string tmp_str;
- tmp_str.assign(value.c_str());
- if (tmp_str.find("head") == string::npos)
- {
- gp.total_reads_num_random = true;
- // gp.catWhenrunning=false;
- for (int i = 0; i != tmp_str.size(); i++)
- {
- if (!isdigit(tmp_str[i]) && tmp_str[i] != '.')
- {
- cerr << "Error:-L value should be a positive integer or float" << endl;
- exit(1);
- }
- }
- }
- else
- {
- gp.total_reads_num_random = false;
- tmp_str.erase(tmp_str.find("head"), 4);
- if (tmp_str.find(".") != string::npos)
- {
- cerr << "Error:-L value should be a integer when with head suffix" << endl;
- exit(1);
- }
- else
- {
- for (int i = 0; i != tmp_str.size(); i++)
- {
- if (!isdigit(tmp_str[i]))
- {
- cerr << "Error:-L value should be an integer when with head suffix" << endl;
- exit(1);
- }
- }
- }
- }
- float tmp_val = atof(value.c_str());
- if (tmp_val == 0)
- {
- cerr << "Error:-L value should be a positive integer or float" << endl;
- exit(1);
- }
- gp.total_reads_num = tmp_val;
- if (tmp_val < 1)
- {
- gp.f_total_reads_ratio = tmp_val;
- }
- else
- {
- istringstream is_str(tmp_str);
- is_str >> gp.l_total_reads_num;
- }
- if (gp.f_total_reads_ratio > 0 && gp.l_total_reads_num > 0)
- {
- cerr << "Error:reads number and ratio should not be both assigned at the same time" << endl;
- exit(1);
- }
- }
- if (para == "cleanOutSplit")
- {
- string paraCheck = value;
- for (int i = 0; i != paraCheck.size(); i++)
- {
- if (!isdigit(paraCheck[i]))
- {
- cerr << "Error:-w value should be a positive integer" << endl;
- exit(1);
- }
- }
- gp.cleanOutSplit = atoi(paraCheck.c_str());
- if (gp.cleanOutSplit == 0)
- {
- cerr << "Error:-w value should be a positive integer" << endl;
- exit(1);
- }
- }
- if (para == "trim")
- {
- gp.trim = value;
- }
- if (para == "trimBadHead")
- {
- gp.trimBadHead = value;
- }
- if (para == "trimBadTail")
- {
- gp.trimBadTail = value;
- }
- /*legalParas.insert("cleanOutSplit");
- legalParas.insert("trim");
- legalParas.insert("trimBadHead");
- legalParas.insert("trimBadTail");
- */
- // stLFR
- /*string barcodeListPath;
- string barcodeRegionStr;
- bool notCutNoLFR;
- */
- if (para == "barcodeListPath")
- {
- gp.barcodeListPath.assign(value.c_str());
- }
- if (para == "barcodeRegionStr")
- {
- gp.barcodeRegionStr.assign(value.c_str());
- }
- if (para == "notCutNoLFR")
- {
- gp.notCutNoLFR = true;
- }
- if (para == "inputAsList")
- {
- gp.inputAsList = true;
- }
- if (para == "tenX")
- {
- gp.tenX = true;
- }
- if (para == "rmdup")
- {
- gp.rmdup = true;
- }
- // if(para=="approximateReadsNum"){
- // if(isdigit(value[value.size()-1])){
- // gp.approximateReadsNum=atol(value.c_str());
- // }else if(value[value.size()-1]=='M' || value[value.size()-1]=='m'){
- // string realValue=value.substr(0,value.size()-1);
- // gp.approximateReadsNum=atol(realValue.c_str())*1024*1024;
- // }else if(value[value.size()-1]=='G' || value[value.size()-1]=='g') {
- // string realValue = value.substr(0, value.size() - 1);
- // gp.approximateReadsNum = atol(realValue.c_str()) * 1024 * 1024 * 1024;
- // }else{
- // cerr<<"Error:cannot recognize value,"<<value<<endl;
- // exit(1);
- // }
- // }
- // if(para=="memSizeUsedInRmdup"){
- // if(isdigit(value[value.size()-1])){
- // gp.memSizeUsedInRmdup=atol(value.c_str());
- // }else if(value[value.size()-1]=='M' || value[value.size()-1]=='m'){
- // string realValue=value.substr(0,value.size()-1);
- // gp.memSizeUsedInRmdup=atol(realValue.c_str())*1024*1024;
- // }else if(value[value.size()-1]=='G' || value[value.size()-1]=='g') {
- // string realValue = value.substr(0, value.size() - 1);
- // gp.memSizeUsedInRmdup = atol(realValue.c_str()) * 1024 * 1024 * 1024;
- // }else{
- // cerr<<"Error:cannot recognize value,"<<value<<endl;
- // exit(1);
- // }
- // }
- // if(para=="expectedFalsePositive"){
- // gp.expectedFalsePositive=stof(value.c_str());
- // if(gp.expectedFalsePositive==0 || gp.expectedFalsePositive==1){
- // cout<<"Warning:expected FP you set is "<<gp.expectedFalsePositive<<", please check the parameter"<<endl;
- // }
- // }
- }
- }
process_argv.cpp at commit 2d5b727, under GPL-3.0 · at the source
Overview
- Shandong Provincial Key Laboratory of Development and Regeneration, School of Life Sciences, Shandong University, Qingdao, China
Abstract
During metamorphic development from larva to adult, insect brains exhibit cell proliferation; however, the molecular mechanisms governing this process remain poorly understood. Employing the lepidopteran insect Helicoverpa armigera (cotton bollworm), an agricultural pest, as a model system, this study demonstrates that the steroid hormone 20-hydroxyecdysone (20E) regulates neural cell proliferation during imaginal brain development by upregulating the expression of SOX12 and DELTA via nuclear receptor EcRA. SOX12 exhibits significantly elevated expression and is localized in the brain during metamorphosis. Overexpression of SOX12-GFP in the H. armigera epidermal cell line (HaEpi) promotes cell proliferation. RNA interference (RNAi)-mediated knockdown of Sox12 in larvae leads to lethality, delayed pupation, impaired imaginal brain development, downregulation of cell proliferation-related genes, and reduced neural cell proliferation in the brain. CRISPR/
Reproduced under the paper's license (CC BY), from the paper cited above.
Repository
Its files are read in the Code ↔ Paper reader above, with 1 match between paragraphs and lines of code.
BGI-flexlab/SOAPnuke
2d5b727d6a7451f6188a46360a55bacf7baff158, 28 March 2024Availability: 2 checks, the latest on 28 October 2026: the link answers
- 28 October 2026: the link answers
- 27 September 2026: the link answers
34 files
- src/
BloomFilter.cpp , C++, 162 lines - src/
BloomFilter.h , C/C++, 37 lines - src/
ReverseBloomFilter.cpp , C++, 61 lines - src/
ReverseBloomFilter.h , C/C++, 29 lines - src/
Rscripts/ , R, 36 linesQ20Q30.R - src/
Rscripts/ , R, 55 linesbase.R - src/
Rscripts/ , R, 64 linesquality.R - src/
gc.cpp , C++, 657 lines - src/
gc.h , C/C++, 57 lines - src/
global_parameter.h , C/C++, 192 lines - src/
global_variable.cpp , C++, 102 lines - src/
global_variable.h , C/C++, 144 lines - src/
mGzip.cpp , C++, 232 lines - src/
mGzip.h , C/C++, 45 lines - src/
main.cpp , C++, 68 lines - src/
peFilterTmpOut.h , C/C++, 28 lines - src/
peprocess.cpp , C++, 3,807 lines - src/
peprocess.h , C/C++, 150 lines - src/
processHts.cpp , C++, 2,297 lines - src/
processHts.h , C/C++, 156 lines - src/
processStLFR.cpp , C++, 653 lines - src/
processStLFR.h , C/C++, 33 lines - src/
process_argv.cpp , C++, 1,638 lines, 1 match - src/
process_argv.h , C/C++, 25 lines - src/
read_filter.cpp , C++, 1,088 lines - src/
read_filter.h , C/C++, 27 lines - src/
rmdup.cpp , C++, 215 lines - src/
rmdup.h , C/C++, 31 lines - src/
seprocess.cpp , C++, 2,744 lines - src/
seprocess.h , C/C++, 192 lines - src/
sequence.cpp , C++, 404 lines - src/
sequence.h , C/C++, 117 lines - COPYING, License, 241 lines
- Readme.md, Text, 456 lines
Tracing map
Proposed by the machine: these links were found in the paper and verified at the source, without human review. The map will receive a Zenodo DOI once one of the paper's authors has validated it with their ORCID.
What the map holds:
- 1 repository of the authors' code, each at its verified commit, with its license and how the link was found in the paper;
- 32 scripts, each with its path and the digest of its content;
- 1 match between paragraphs of the paper and lines of the code (method lexical-v1);
- neither the text of the paper nor the code itself.
Its JSON (tracing-map.json) is deposited on Zenodo with its DOI once the map is validated.
Data
No dataset and no data link were found in the paper.
Data availability
All data are contained within the article. The raw RNA-seq data generated from this study have been deposited in the Sequence Read Archive with the accession number PRJNA1498007. This article contains supporting information.
Reproduced under the paper's license (CC BY), from the paper cited above.
Versions
The history of this record: each version stored by the harvester or made by a correction of its authors or of the maintainers of its code, and what changed in its facts. The texts of the paper (its abstract, its availability statements) are not part of it; versions that changed only those are not listed.
Version 1, 27 September 2026: the first record
Recorded: type, language, journal, volume, issue, pages, dates, 6 authors, 5 keywords, 1 funder, 54 references, 3 RRIDs.
Cite
This paper
Wang, L., Liang, L.-Q., Feng, P.-Y., Li, Y., Wang, J.-X., & Zhao, X.-F. (2026). SOX12 and DELTA mediate ecdysone-driven adult neural cell proliferation during metamorphosis. The Journal of biological chemistry, 302(9), 113409.
BibTeX
@article{wang2026sox12,
author = {Wang, Lin and Liang, Li-Qiang and Feng, Pei-Yao and Li, Yan and Wang, Jin-Xing and Zhao, Xiao-Fan},
title = {{SOX12 and DELTA mediate ecdysone-driven adult neural cell proliferation during metamorphosis}},
journal = {The Journal of biological chemistry},
year = {2026},
month = aug,
volume = {302},
number = {9},
pages = {113409},
publisher = {American Society for Biochemistry and Molecular Biology},
issn = {0021-9258},
pmcid = {PMC13553576}
}
RIS
TY - JOUR
AU - Wang, Lin
AU - Liang, Li-Qiang
AU - Feng, Pei-Yao
AU - Li, Yan
AU - Wang, Jin-Xing
AU - Zhao, Xiao-Fan
TI - SOX12 and DELTA mediate ecdysone-driven adult neural cell proliferation during metamorphosis
T2 - The Journal of biological chemistry
J2 - J Biol Chem
PY - 2026
DA - 2026/
VL - 302
IS - 9
SP - 113409
SN - 0021-9258
PB - American Society for Biochemistry and Molecular Biology
LA - en
ER -
CSL-JSON
{
"id": "pmcid:PMC13553576",
"type": "article-journal",
"title": "SOX12 and DELTA mediate ecdysone-driven adult neural cell proliferation during metamorphosis",
"container-title": "The Journal of biological chemistry",
"author": [
{
"family": "Wang",
"given": "Lin"
},
{
"family": "Liang",
"given": "Li-Qiang"
},
{
"family": "Feng",
"given": "Pei-Yao"
},
{
"family": "Li",
"given": "Yan"
},
{
"family": "Wang",
"given": "Jin-Xing"
},
{
"family": "Zhao",
"given": "Xiao-Fan"
}
],
"container-title-short":
"volume": "302",
"issue": "9",
"page": "113409",
"PMCID": "PMC13553576",
"ISSN": "0021-9258",
"publisher": "American Society for Biochemistry and Molecular Biology",
"language": "en",
"issued": {
"date-parts": [
[
2026,
8,
7
]
]
}
}
The tracing map gets a citation of its own once an author has validated it and it has a DOI.
Similar papers
The papers with a page that share the most with this one: the tools found in their code, their categories, datasets, cited references and authors, the rarest counting most.
- [1] doi:10.7554/elife.90136 [code]
- Notch signaling and Bsh homeodomain activity are integrated to diversify <i>Drosophila</
i> lamina neuron types. Journal: eLifeIn common: cellular / molecular, 3 references - [2] doi:10.1038/s42003-025-09344-6
- A new system for studying neuronal remodeling and its relation to behavior in Drosophila.Journal: Communications biologyIn common: 3 references
- [3] doi:10.1371/journal.pone.0289435
- A familial Alzheimer's disease associated mutation in presenilin-1 mediates amyloid-beta independent cell specific neurodegeneration.Journal: PloS oneIn common: cellular / molecular, 2 references
- [4] doi:10.4252/wjsc.v13.i10.1417
- SOX transcription factors and glioma stem cells: Choosing between stemness and differentiation.Journal: World journal of stem cellsIn common: cellular / molecular, 2 references
- [5] doi:10.1038/s41556-025-01813-8 [code]
- Modelling co-development between the somites and neural tube in human trunk-like structures.Journal: Nature cell biologyIn common: 2 references
- [6] doi:10.1098/rsif.2022.0339 [code]
- Dynamic switching of lateral inhibition spatial patterns.Journal: Journal of the Royal Society, InterfaceIn common: 2 references
- [7] doi:10.1159/000536574
- Genetic Variability of <i>SOX10</
i>-Related Disorders within an Italian Family: Straddling the Line between Kallmann and Waardenburg Syndrome. Journal: Molecular syndromologyIn common: 2 references - [8] doi:10.1016/j.stemcr.2024.09.007
- Targeting glioblastoma with a brain-penetrant drug that impairs brain tumor stem cells via NLE1-Notch1 complex.Journal: Stem cell reportsIn common: cellular / molecular, 2 references
- [9] doi:10.1038/s41586-026-10797-w [code]
- A global molecular code for birth order and neuronal identity in Drosophila.Journal: NatureIn common: cellular / molecular, 2 references
- [10] doi:10.1126/sciadv.abo2416
- Homologous gene regulatory networks control development of apical organs and brains in Bilateria.Journal: Science advancesIn common: 2 references
Contribute
The authors of this paper can claim it, correct its record and validate its tracing map, and the maintainers of its code (its owner, or a public member of its organization) correct what it says of their repository; anyone signed in can ask for its removal. Every request goes to OSCR's own machine, which answers it; your account page follows them.
Sign in with ORCID to claim this paper as one of its authors, correct its record or validate its tracing map: when the paper's metadata lists your ORCID iD, you are recognized at once. Maintainers of its code: sign in with GitHub, then claim the repository on your account page.
Claim this paper
Correct its record
Say what each link of this record is, remove the ones that are not the paper's, add the ones that are missing. The correction becomes a new version of the record, in its Versions section.
Validate its tracing map
You validate the map as this page shows it: 1 repository of the authors' code, each at its verified commit and with its license, 32 scripts, and 1 match between paragraphs and code (see the Code and Map sections). It then receives a DOI on Zenodo, with you (your ORCID iD) and OSCR as its creators; the code itself is not deposited.
The map's fingerprint: sha256:d4882ad3518fa894…
Add the badge to the code's README
If you are an author or a maintainer of this paper's code, you can add this badge. It says what OSCR knows of the paper (its code, its validated tracing map) and links the code to this page. Paste one of these snippets under the README's title. Keep the two marks around it, so that the badge can be replaced in place and is never added twice. OSCR changes nothing in your repository.
Markdown
<!-- oscr-badge:start -->
[](https://openscicode.org/badge/repo/github.com/bgi-flexlab/soapnuke)
<!-- oscr-badge:end -->reStructuredText
.. oscr-badge:start
.. image:: https://openscicode.org/badge/repo/github.com/bgi-flexlab/soapnuke.svg
:target: https://openscicode.org/badge/repo/github.com/bgi-flexlab/soapnuke
:alt: OSCR
.. oscr-badge:endHTML
<!-- oscr-badge:start -->
<a href="https://openscicode.org/badge/repo/github.com/bgi-flexlab/soapnuke"><img src="https://openscicode.org/badge/repo/github.com/bgi-flexlab/soapnuke.svg" alt="OSCR"></a>
<!-- oscr-badge:end -->On GitHub, open the README, choose Edit (the pencil), paste the snippet under the title, then "Commit changes".
If you choose to, you can have the badge kept up to date for you, with oscr badge --write from the command line or with the GitHub Action in your repository's workflows. Every other form and option (a card, AsciiDoc, LaTeX, shields.io) is on the badge page.
Request its removal
To ask OSCR to remove this record, the copies of its authors' scripts or its tracing map, use the removal request page: signed in, you say who you are, what to remove and why, then review and confirm the request. Published rules decide every request (how).
Discussion, reproductions, activity
Discussion: code errors and mismatches between the code and the paper about this paper and its code, from readers and its authors, beside the paper and its tracing map.
Report a mismatch between the code and the paper · Report a code error (signed in)
Reproductions: reports from readers who ran the authors' code and did not get the paper's result, what they ran, with which environment, commit and data.
Report a reproduction failure (signed in)
Versions of its code: the releases of its code tied to a version of this paper (the preprint, the accepted manuscript, the version of record…), each with the tracing map versioned with it.
Activity: what happens around this paper: new versions of its record, its map's validation, discussions and reproductions. It opens with sign-in.
