Intrathecal (G<sub>4</sub>C<sub>2</sub>)<sub>149</sub> delivery in C9orf72-deficient mice yields mild motor dysfunction and ALS/FTD pathological hallmarks.
One block of code here has a permanent identifier (oscr:b:…), listed with the matches below: citable for good, with a page of its own. Select a match and press Cite to copy it. What a block identifier is.
The 2 matches
- [1] § Results › Mild hyperactivity observed in the open field; anxiety remains unchanged ↔ KAR_Acta_Neuro_Comm_v1.13.Rmd, lines 135 to 180 · score 0.70 · perimeter zone, center zone, open field, episodes, immobile, speed · block
oscr:b:9T63SBFDN3VQ8-B· Report a mismatch - [2] § Results › Gait analysis identifies subtle signatures of motor dysfunction ↔ KAR_Acta_Neuro_Comm_v1.13.Rmd, lines 135 to 180 · score 0.61 · Paw Drag, body mass, Propel, Swing, Stance, Stride · block
oscr:b:9T63SBFDN3VQ8-B· Report a mismatch
Paper
Loaded from Europe PMC by your browser; OSCR does not store it: doi.org · Europe PMC
The paper is loaded when this pane is shown.
The authors' code
R Markdown · 1,195 lines · 40 KB · CC-BY-4.0 · 2 matches
- ---
- title: "20260620_Plotting_variables_and_groups_v1.12"
- author: "Aaron Haeusler"
- date: "`r Sys.Date()`"
- output: html_document
- ---
- ```{r setup, include=FALSE}
- if (!require("pacman")) install.packages("pacman")
- pacman::p_load(
- readr,
- dplyr,
- ggplot2,
- forcats,
- ggnewscale,
- RColorBrewer,
- reshape2,
- scales
- )
- wd <- getwd()
- data <- read_csv("Combined_Intrathecal_Data.csv")
- # Fix column names for merging (remove any stray spaces)
- colnames(data) <- gsub(" ", "_", colnames(data))
- # Ensure numeric and merge expression columns
- data <- data %>%
- mutate(
- across(c(Expression_12m, Expression_9m, Expression_6m), as.numeric),
- Expression_Merged = coalesce(Expression_12m, Expression_9m, Expression_6m, 0),
- Expression_Merged = ifelse(Treatment %in% c("None", "Control"), 0, Expression_Merged)
- )
- # Calculate quartiles (excluding zero)
- qtiles <- quantile(data$Expression_Merged[data$Expression_Merged > 0], probs = seq(0, 1, 0.25), na.rm = TRUE)
- data <- data %>%
- mutate(
- Expression_Quartile = case_when(
- is.na(Expression_Merged) | Expression_Merged == 0 ~ "0",
- Expression_Merged > 0 & Expression_Merged <= qtiles[2] ~ "Q1",
- Expression_Merged > qtiles[2] & Expression_Merged <= qtiles[3] ~ "Q2",
- Expression_Merged > qtiles[3] & Expression_Merged <= qtiles[4] ~ "Q3",
- Expression_Merged > qtiles[4] ~ "Q4"
- ),
- Expression_Quartile = factor(Expression_Quartile, levels = c("0", "Q1", "Q2", "Q3", "Q4"), ordered = TRUE)
- )
- # Set up your grayscale palette
- grayscale_pal <- c(
- "0" = "#FFFFFF", # white
- "Q1" = "#CECECE", # very light gray
- "Q2" = "#ABABAB", # light gray
- "Q3" = "#7D7D7D", # medium gray
- "Q4" = "#222222" # near black
- )
- # Set factors for better color/shape control
- data <- data %>%
- mutate(
- Genotype = factor(Genotype, levels = c("WT", "Het", "Homo")),
- Treatment = factor(Treatment, levels = c("Control", "Repeats", "None")),
- Sex = factor(Sex, levels = c("Female", "Male")),
- Condition = as.factor(Condition)
- )
- data <- data %>%
- mutate(
- distribution = case_when(
- Unit == "LBF" ~ "gaussian",
- Unit == "cm" ~ "gaussian",
- Unit == "coefficient" ~ "gaussian",
- Unit == "degrees" ~ "gaussian",
- Unit == "metric" ~ "gaussian",
- Unit == "percentage" ~ "gaussian",
- Unit == "cm_squared" ~ "Gamma",
- Unit == "cm_squared_per_sec" ~ "Gamma",
- Unit == "meters" ~ "Gamma",
- Unit == "meters_per_second" ~ "Gamma",
- Unit == "steps_per_sec" ~ "Gamma",
- Unit == "seconds" ~ "Gamma",
- Unit == "ratio" ~ "Gamma",
- Unit == "total_degrees" ~ "Gamma",
- Unit == "count" ~ "poisson",
- Unit == "mV" ~ "gaussian",
- Unit == "mV*ms" ~ "Gamma",
- Unit == "ms" ~ "gaussian",
- Unit == "mm" ~ "gaussian",
- StatsVariable == "All latency variables" ~ "Gamma",
- all(Value == floor(Value), na.rm = TRUE) ~ "poisson",
- TRUE ~ "gaussian"
- )
- )
- library(dplyr)
- # 1. Split Digigait from all other experiments
- digigait <- data %>% filter(Exp == "Digigait")
- data_other <- data %>% filter(Exp != "Digigait")
- # 2. Aggregate Digigait Left/Right by Fore/Hind, rename Side as Both
- digigait_agg <- digigait %>%
- filter(Side %in% c("Left", "Right"), Limb %in% c("Fore", "Hind")) %>%
- group_by(across(-c(Value, Stdev, SEM, Side, Condition))) %>%
- summarise(
- Value = mean(Value, na.rm = TRUE),
- Stdev = sd(Value, na.rm = TRUE),
- SEM = sd(Value, na.rm = TRUE) / sqrt(sum(!is.na(Value))),
- .groups = "drop"
- ) %>%
- mutate(Side = "Both",
- Condition = Limb
- )
- # 3. Remove original Left/Right Fore/Hind Digigait rows
- digigait_rest <- digigait %>%
- filter(!(Side %in% c("Left", "Right") & Limb %in% c("Fore", "Hind")))
- # 4. Combine everything back together
- data_combined <- bind_rows(data_other, digigait_rest, digigait_agg)
- # 5. (optional) Arrange for easy viewing
- data <- data_combined %>%
- arrange(Ear_Tag, Time_month, Exp, Limb, Side)
- # Now data_combined is your updated dataset
- df <- data
- write_csv(data, "combined_intrathecal_data_ave_digigait.csv")
- ```
- ``` {r publication_boxplots, include=FALSE}
- library(dplyr)
- library(ggplot2)
- library(ggnewscale)
- library(purrr)
- library(RColorBrewer)
- library(scales)
- library(tibble)
- df <- data # Replace with your actual data object name
- # ---- Subset Table ----
- subset_table <- tribble(
- ~Exp, ~Time_month, ~Condition, ~StatsVariable,
- "Grip", 12, NA, "Grip_Strength",
- "CMAP", 12, "Ankle", "Amplitude",
- "CMAP", 12, "Hip", "Area_Under_Curve",
- "OpenField", 10, NA, "Total_distance_travelled",
- "OpenField", 10, NA, "Average_speed",
- "OpenField", 10, NA, "Total_time_mobile",
- "OpenField", 10, NA, "Total_immobile episodes",
- "OpenField", 10, NA, "Average_speed_in_the_Perimeter_zone",
- "OpenField", 10, NA, "Time_in_the_Center_zone",
- "OpenField", 10, NA, "Distance_travelled_in_the_Perimeter_zone",
- "Rotarod", 12, NA, "Latency_to_Fall",
- "Body_mass", 12, NA, "Weight_grams",
- "Digigait", 12, "Hind", "Stride",
- "Digigait", 12, "Hind", "Swing",
- "Digigait", 12, "Hind", "Stance",
- "Digigait", 12, "Hind", "Stance/Swing",
- "Digigait", 12, "Hind", "PawDrag",
- "Digigait", 12, "Hind", "PercentSharedStance",
- "Digigait", 12, "Hind", "AbsolutePawAngle",
- "Digigait", 12, "Hind", "Propel",
- "GA", 12, NA, "Normalized_Area",
- "GP", 12, NA, "Normalized_Area",
- "GR", 12, NA, "Normalized_Area",
- "GFAP", 12, NA, "Normalized_Area",
- "Iba1", 12, NA, "Normalized_Area",
- "NeuN", 12, NA, "Normalized_Area",
- "pTDP43", 12, NA, "Normalized_Area",
- "TDP_CE", 12, NA, "Sort1_CE_normalized",
- "NeuN_count", 12, NA, "Mean_Total_Count",
- "spleen", 12, NA, "Weight_mg",
- )
- # ---- Subset and Clean ----
- plot_data <- pmap_dfr(subset_table, function(Exp, Time_month, Condition, StatsVariable) {
- df %>%
- filter(
- Exp == !!Exp,
- Time_month == !!Time_month,
- StatsVariable == !!StatsVariable,
- (is.na(Condition) & is.na(.data$Condition)) |
- (!is.na(Condition) & Condition == .data$Condition),
- !(Exp == "Digigait" & Limb == "Fore")
- )
- }) %>%
- mutate(
- Treatment_Combined = ifelse(Treatment %in% c("None", "Control"), "Control", "Repeats"),
- Treatment_Shape = factor(Treatment, levels = c("None", "Control", "Repeats")),
- Genotype = factor(Genotype, levels = c("WT", "Het", "Homo")),
- Sex = factor(Sex, levels = c("Female", "Male")),
- Genotype_Tx = factor(
- interaction(Genotype, Treatment_Combined, sep = "_"),
- levels = c("WT_Control", "Het_Control", "Homo_Control",
- "WT_Repeats", "Het_Repeats", "Homo_Repeats")
- ),
- facet_id = paste(Exp, Condition, StatsVariable, sep = "_")
- )
- # ---- Split Body_mass by Sex ----
- body_split <- plot_data %>%
- filter(Exp == "Body_mass") %>%
- mutate(facet_id = paste0("Body_mass_", Sex, "_Weight_grams"))
- plot_data <- plot_data %>%
- filter(!(Exp == "Body_mass" & StatsVariable == "Weight_grams")) %>%
- bind_rows(body_split)
- # ---- Additional filter ----
- imaging_exps <- c("GA", "GP", "GR", "GFAP", "Iba1", "NeuN", "pTDP43", "NeuN_count", "TDP_CE")
- plot_data <- plot_data %>%
- filter(
- !(Exp %in% imaging_exps & Genotype == "Het" & Treatment_Combined == "Repeats") |
- (Exp %in% imaging_exps & Genotype == "Het" & Treatment_Combined == "Repeats" &
- Expression_Quartile %in% c("Q2", "Q3"))
- )
- # ---- Facet Fillers ----
- facet_combinations <- plot_data %>%
- distinct(facet_id, Exp, Condition, StatsVariable)
- num_facets <- nrow(facet_combinations)
- num_per_page <- 12
- num_pages <- ceiling(num_facets / num_per_page)
- fillers_needed <- (num_pages * num_per_page) - num_facets
- if (fillers_needed > 0) {
- filler_data <- tibble(
- facet_id = paste0("filler_", seq_len(fillers_needed)),
- Exp = "Filler", Condition = NA, StatsVariable = "Empty",
- Genotype_Tx = factor(NA, levels = levels(plot_data$Genotype_Tx)),
- Value = NA
- )
- facet_combinations <- bind_rows(facet_combinations, filler_data)
- plot_data <- bind_rows(plot_data, filler_data)
- }
- # ---- Aesthetics ----
- sex_colors <- c("Female" = "red", "Male" = "blue")
- shape_values <- c("None" = 22, "Control" = 23, "Repeats" = 21)
- custom_fill_colors <- c(
- "WT_Repeats" = "#f15b60", # red
- "Het_Repeats" = "#f79151", # orange
- "Homo_Repeats" = "#ffcb38", # yellow
- "WT_Control" = "#00b04f", # green
- "Het_Control" = "#109ab3", # blue
- "Homo_Control" = "#8a77aa" # purple
- )
- # ---- Plot Loop ----
- pdf("Subset_Boxplot_GenoTx_SunsetOceanOrchid_3x4_Fillers.pdf", width = 5.5, height = 7)
- for (page in seq_len(num_pages)) {
- start_idx <- (page - 1) * num_per_page + 1
- end_idx <- min(page * num_per_page, nrow(facet_combinations))
- page_facets <- facet_combinations$facet_id[start_idx:end_idx]
- pd <- plot_data %>% filter(facet_id %in% page_facets) %>% droplevels()
- p <- ggplot(pd, aes(
- x = Genotype_Tx,
- y = Value,
- group = Genotype_Tx,
- fill = Genotype_Tx
- )) +
- geom_boxplot(
- position = position_dodge(width = 0.8),
- outlier.shape = NA,
- alpha = 1,
- width = 0.65
- ) +
- scale_fill_manual(values = custom_fill_colors, name = "Genotype × Treatment") +
- ggnewscale::new_scale_fill() +
- geom_jitter(
- aes(fill = Sex, shape = Treatment_Shape),
- color = "black", size = 1, stroke = 0.5, alpha = 0.85,
- position = position_jitter(width = 0.18, height = 0)
- ) +
- scale_fill_manual(values = sex_colors, name = "Sex") +
- scale_shape_manual(values = shape_values, name = "Original Treatment") +
- scale_x_discrete(drop = FALSE, na.translate = FALSE) +
- ylab("Value") +
- xlab("Genotype × Treatment Group") +
- facet_wrap(~ facet_id, scales = "free_y", ncol = 3, nrow = 4) +
- theme_classic(base_size = 8) +
- theme(
- strip.background = element_rect(fill = "grey90", color = "black"),
- strip.text = element_text(face = "bold", size = 4),
- axis.text.x = element_text(angle = 45, hjust = 1),
- legend.position = "right",
- axis.ticks.y = element_line(size = 0.3)
- )
- print(p)
- }
- dev.off()
- ```
- ```{r scatter_expression_correlations_publication, include=FALSE}
- ### -----------------------------------------------------------
- ### FACETED SCATTER PLOT WITH R², p, p_adj • 4×6 PAGE LAYOUT
- ### Genotype × Treatment Coloring (Repeats Only) + Fillers
- ### -----------------------------------------------------------
- library(dplyr)
- library(ggplot2)
- library(broom)
- library(purrr)
- library(tidyr)
- # ---- Subset and Clean ----
- plot_data <- pmap_dfr(subset_table, function(Exp, Time_month, Condition, StatsVariable) {
- df %>%
- filter(
- Exp == !!Exp,
- Time_month == !!Time_month,
- StatsVariable == !!StatsVariable,
- (is.na(Condition) & is.na(.data$Condition)) |
- (!is.na(Condition) & Condition == .data$Condition),
- !(Exp == "Digigait" & Limb == "Fore")
- )
- }) %>%
- mutate(
- Treatment_Combined = ifelse(Treatment %in% c("None", "Control"), "Control", "Repeats"),
- Treatment_Shape = factor(Treatment, levels = c("None", "Control", "Repeats")),
- Genotype = factor(Genotype, levels = c("WT", "Het", "Homo")),
- Sex = factor(Sex, levels = c("Female", "Male")),
- Genotype_Tx = factor(
- interaction(Genotype, Treatment_Combined, sep = "_"),
- levels = c("WT_Control", "Het_Control", "Homo_Control",
- "WT_Repeats", "Het_Repeats", "Homo_Repeats")
- ),
- facet_id = paste(Exp, Condition, StatsVariable, sep = "_")
- )
- # ---- Split Body_mass by Sex ----
- body_split <- plot_data %>%
- filter(Exp == "Body_mass") %>%
- mutate(facet_id = paste0("Body_mass_", Sex, "_Weight_grams"))
- plot_data <- plot_data %>%
- filter(!(Exp == "Body_mass" & StatsVariable == "Weight_grams")) %>%
- bind_rows(body_split)
- ### -----------------------------------------------------------
- ### 1. Prepare data with Genotype × Treatment factor
- ### -----------------------------------------------------------
- scatter_data <- plot_data %>%
- mutate(
- Treatment_Combined = ifelse(Treatment %in% c("None", "Control"),
- "Control", "Repeats"),
- Genotype_Tx = factor(
- interaction(Genotype, Treatment_Combined, sep = "_"),
- levels = c("WT_Control","Het_Control","Homo_Control",
- "WT_Repeats","Het_Repeats","Homo_Repeats")
- )
- ) %>%
- filter(
- Treatment == "Repeats",
- !is.na(Expression_Merged),
- Expression_Merged > 0,
- !is.na(Value)
- ) %>%
- mutate(
- Expression = as.numeric(Expression_Merged),
- Expression_log2 = log2(Expression_Merged)
- )
- ### -----------------------------------------------------------
- ### 2. Compute LM stats per facet (R², p, FDR)
- ### -----------------------------------------------------------
- facet_stats <- scatter_data %>%
- group_by(facet_id) %>%
- do({
- m <- lm(Value ~ Expression_log2, data = .)
- tibble(
- r2 = summary(m)$r.squared,
- p = glance(m)$p.value
- )
- }) %>%
- ungroup() %>%
- mutate(
- p_adj = p.adjust(p, method = "BH"),
- label = sprintf("R² = %.2f\np = %.3g\nFDR = %.3g",
- r2, p, p_adj)
- )
- scatter_plot_data <- scatter_data %>%
- left_join(facet_stats, by = "facet_id")
- ### -----------------------------------------------------------
- ### 3. Pagination + Fillers (4×6 = 24 plots per page)
- ### -----------------------------------------------------------
- facets <- sort(unique(scatter_plot_data$facet_id))
- n_per_page <- 24 # 4 columns × 6 rows
- n_pages <- ceiling(length(facets) / n_per_page)
- # Add filler facets to fill last page to 24 slots
- fillers_needed <- n_pages * n_per_page - length(facets)
- if (fillers_needed > 0) {
- filler_ids <- paste0("Filler_", seq_len(fillers_needed))
- # Create filler entries with NA values
- filler_df <- tibble(
- facet_id = rep(filler_ids, each = 1),
- Value = NA,
- Expression_log2 = NA,
- Genotype_Tx = factor(NA, levels = levels(scatter_plot_data$Genotype_Tx)),
- label = ""
- )
- facets <- c(facets, filler_ids)
- }
- ### -----------------------------------------------------------
- ### 4. Genotype × Treatment colors
- ### -----------------------------------------------------------
- genoTx_colors <- c(
- "WT_Repeats" = "#f15b60",
- "Het_Repeats" = "#f79151",
- "Homo_Repeats" = "#ffcb38",
- "WT_Control" = "#00b04f",
- "Het_Control" = "#109ab3",
- "Homo_Control" = "#8a77aa"
- )
- ### -----------------------------------------------------------
- ### 5. PDF loop (each page is 4×6 facets)
- ### -----------------------------------------------------------
- pdf("GenotypeTx_vs_Expression_log2_FacetedScatter_Paginated.pdf",
- width = 9, height = 10)
- for (page in seq_len(n_pages)) {
- start <- (page - 1) * n_per_page + 1
- end <- page * n_per_page
- these_facets <- facets[start:end]
- page_data <- scatter_plot_data %>%
- filter(facet_id %in% these_facets) %>%
- bind_rows(filler_df %>% filter(facet_id %in% these_facets)) %>%
- mutate(facet_id = factor(facet_id, levels = these_facets))
- p <- ggplot(page_data,
- aes(x = Expression_log2, y = Value)) +
- geom_point(
- aes(color = Genotype_Tx),
- size = 1.6, alpha = 0.85, na.rm = TRUE
- ) +
- geom_smooth(
- method = "lm", se = FALSE,
- color = "black", linewidth = 0.6, na.rm = TRUE
- ) +
- geom_text(
- aes(label = label),
- x = -Inf, y = Inf,
- hjust = -0.1, vjust = 1.1,
- size = 3, color = "black",
- lineheight = 0.9
- ) +
- facet_wrap(~ facet_id, ncol = 4, nrow = 6, scales = "free_y") +
- scale_color_manual(
- values = genoTx_colors,
- name = "Genotype × Treatment",
- na.translate = FALSE
- ) +
- scale_x_continuous(
- breaks = pretty(range(scatter_plot_data$Expression_log2), 5),
- labels = function(x) round(2^x, 1),
- name = "Expression (raw units, log2 scale)"
- ) +
- labs(
- y = "Phenotype Value",
- title = paste0("Genotype × Treatment Effects vs log2(Expression) — Page ", page)
- ) +
- theme_bw(base_size = 6) +
- theme(
- plot.title = element_text(face = "bold", size = 14, hjust = 0.5),
- strip.background = element_rect(fill = "white"),
- strip.text = element_text(face = "bold", size = 5),
- legend.position = "bottom",
- panel.grid = element_blank(),
- panel.spacing = unit(1.1, "lines")
- )
- print(p)
- }
- dev.off()
- ```
- ```{r correlation_matrix_dot_pot_publication, include=FALSE}
- library(dplyr)
- library(tidyr)
- library(ggplot2)
- library(reshape2)
- library(purrr)
- df <- data # Replace with your actual data object name
- # ---- Subset Table ----
- subset_table <- tribble(
- ~Exp, ~Time_month, ~Condition, ~StatsVariable,
- "Grip", 12, NA, "Grip_Strength",
- "CMAP", 12, "Ankle", "Amplitude",
- #"CMAP", 12, "Hip", "Area_Under_Curve",
- #"OpenField", 10, NA, "Total_distance_travelled",
- "OpenField", 10, NA, "Average_speed",
- #"OpenField", 10, NA, "Total_time_mobile",
- #"OpenField", 10, NA, "Total_immobile episodes",
- #"OpenField", 10, NA, "Average_speed_in_the_Perimeter_zone",
- "OpenField", 10, NA, "Time_in_the_Center_zone",
- #"OpenField", 10, NA, "Distance_travelled_in_the_Perimeter_zone",
- "Rotarod", 12, NA, "Latency_to_Fall",
- "Body_mass", 12, NA, "Weight_grams",
- "Digigait", 12, "Hind", "Stride",
- #"Digigait", 12, "Hind", "Swing",
- "Digigait", 12, "Hind", "Stance",
- #"Digigait", 12, "Hind", "StanceOverSwing",
- #"Digigait", 12, "Hind", "PawDrag",
- #"Digigait", 12, "Hind", "PercentSharedStance",
- #"Digigait", 12, "Hind", "AbsolutePawAngle",
- "GA", 12, NA, "Normalized_Area",
- "GP", 12, NA, "Normalized_Area",
- "GR", 12, NA, "Normalized_Area",
- "GFAP", 12, NA, "Normalized_Area",
- "Iba1", 12, NA, "Normalized_Area",
- "NeuN", 12, NA, "Normalized_Area",
- #"pTDP43", 12, NA, "Normalized_Area",
- "TDP_CE", 12, NA, "Sort1_CE_normalized",
- "NeuN_count", 12, NA, "Mean_Total_Count",
- #"NeuN_count", 12, NA, "Mean_Area_um2",
- )
- # ---- Subset and Clean ----
- plot_data <- pmap_dfr(subset_table, function(Exp, Time_month, Condition, StatsVariable) {
- df %>%
- filter(
- Exp == !!Exp,
- Time_month == !!Time_month,
- StatsVariable == !!StatsVariable,
- (is.na(Condition) & is.na(.data$Condition)) |
- (!is.na(Condition) & Condition == .data$Condition),
- !(Exp == "Digigait" & Limb == "Fore")
- )
- }) %>%
- mutate(
- Treatment_Combined = ifelse(Treatment %in% c("None", "Control"), "Control", "Repeats"),
- Treatment_Shape = factor(Treatment, levels = c("None", "Control", "Repeats")),
- Genotype = factor(Genotype, levels = c("WT", "Het", "Homo")),
- Sex = factor(Sex, levels = c("Female", "Male")),
- Genotype_Tx = factor(
- interaction(Genotype, Treatment_Combined, sep = "_"),
- levels = c("WT_Control", "Het_Control", "Homo_Control",
- "WT_Repeats", "Het_Repeats", "Homo_Repeats")
- ),
- facet_id = paste(Exp, Condition, StatsVariable, sep = "_")
- )
- #---------------------------------------------------------------#
- # 1. Summarize each Exp + StatsVariable to one value per mouse
- #---------------------------------------------------------------#
- exp_summary <- plot_data %>%
- mutate(Expression_Merged = ifelse(Treatment != "Repeats", NA, Expression_Merged)) %>%
- group_by(Ear_Tag, Exp, StatsVariable) %>%
- summarise(Exp_Value = mean(Value, na.rm = TRUE), .groups = "drop") %>%
- mutate(ExpVar = paste(Exp, StatsVariable, sep = "_")) %>%
- select(Ear_Tag, ExpVar, Exp_Value) %>%
- pivot_wider(
- names_from = ExpVar,
- values_from = Exp_Value
- )
- #---------------------------------------------------------------#
- # 2. Attach Expression_Merged directly (not summarized)
- #---------------------------------------------------------------#
- expr_values <- plot_data %>%
- distinct(Ear_Tag, Expression_Merged)
- combined_df <- exp_summary %>%
- left_join(expr_values, by = "Ear_Tag")
- #---------------------------------------------------------------#
- # 3. Prepare numeric vars (drop ID, keep sufficient non-NA vars)
- #---------------------------------------------------------------#
- numeric_vars <- combined_df %>%
- select(where(is.numeric)) %>%
- select(-Ear_Tag) %>% # ⭐ REMOVE EAR_TAG ⭐
- select(where(~ sum(!is.na(.)) >= 3))
- #---------------------------------------------------------------#
- # 4. Correlation + P-values
- #---------------------------------------------------------------#
- corr_mat <- cor(numeric_vars, use = "pairwise.complete.obs", method = "pearson")
- p_mat <- matrix(NA, ncol = ncol(numeric_vars), nrow = ncol(numeric_vars))
- colnames(p_mat) <- rownames(p_mat) <- colnames(numeric_vars)
- for (i in seq_len(ncol(numeric_vars))) {
- for (j in seq_len(ncol(numeric_vars))) {
- x <- numeric_vars[[i]]
- y <- numeric_vars[[j]]
- if (sum(complete.cases(x, y)) >= 3) {
- p_mat[i, j] <- cor.test(x, y)$p.value
- }
- }
- }
- # Adjusted p-values
- padj_mat <- matrix(
- p.adjust(as.vector(p_mat), method = "BH"),
- nrow = ncol(numeric_vars),
- dimnames = list(colnames(numeric_vars), colnames(numeric_vars))
- )
- #---------------------------------------------------------------#
- # 5. Melt matrices + hierarchical order
- #---------------------------------------------------------------#
- hc <- hclust(dist(corr_mat))
- ord <- hc$order
- corr_ord <- corr_mat[ord, ord]
- padj_ord <- padj_mat[ord, ord]
- df_plot <- reshape2::melt(corr_ord) %>%
- rename(Var1 = Var1, Var2 = Var2, cor = value) %>%
- mutate(
- padj = as.vector(padj_ord),
- size_value = -log10(padj), # ⭐ new transform
- size_value = pmin(size_value, 3) # ⭐ optional: cap extremes
- ) %>%
- filter(as.numeric(Var1) < as.numeric(Var2)) %>%
- filter(!is.na(cor))
- #---------------------------------------------------------------#
- # 6. Dot plot
- #---------------------------------------------------------------#
- p <- ggplot(df_plot, aes(Var1, Var2, color = cor, size = size_value)) +
- geom_point(alpha = 0.9) +
- scale_color_gradient2(
- low = "#b2182b",
- mid = "#f7f7f7",
- high = "#1f78b4",
- midpoint = 0,
- limits = c(-1, 1),
- name = "Correlation"
- ) +
- scale_size(
- range = c(2, 10),
- name = expression("-log"[10]*"(adj p)"),
- limits = c(0, 5) # explicitly bound scale
- ) +
- coord_fixed() +
- labs(title = "Correlation Matrix Across Experiment × Variable + Expression_Merged") +
- theme_minimal(base_size = 16) +
- theme(
- axis.title = element_blank(),
- axis.text.x = element_text(angle = 45, hjust = 1),
- axis.text.y = element_text(size = 12),
- panel.grid.major = element_line(color = "gray85", linewidth = 0.3),
- plot.title = element_text(size = 20, face = "bold", hjust = 0.5)
- )
- #---------------------------------------------------------------#
- # 7. Export as PDF
- #---------------------------------------------------------------#
- ggsave(
- filename = "correlation_matrix_experiment_variable_pairs.pdf",
- plot = p,
- width = 9,
- height = 9,
- units = "in",
- dpi = 300
- )
- ```
- ```{r plot_signifcant_correlations_publication,include=FALSE}
- ### -----------------------------------------------------------
- ### SIGNIFICANT PHENOTYPE–PHENOTYPE SCATTER PLOTS (R²-based)
- ### Paginated 4×6 Faceting + Fillers • Colored by Genotype × Treatment
- ### -----------------------------------------------------------
- library(dplyr)
- library(ggplot2)
- library(broom)
- library(purrr)
- library(tidyr)
- alpha <- 0.05 # FDR significance cutoff
- ### -----------------------------------------------------------
- ### 1. Identify significant NON-expression pairs
- ### -----------------------------------------------------------
- sig_pairs <- df_plot %>%
- filter(padj < alpha) %>%
- filter(!grepl("Expression", Var1),
- !grepl("Expression", Var2)) %>%
- select(Var1, Var2, cor, padj)
- if (nrow(sig_pairs) == 0) stop("No significant phenotype–phenotype correlations found.")
- ### -----------------------------------------------------------
- ### 2. Build phenotype matrix with Genotype × Treatment mapping
- ### -----------------------------------------------------------
- geno_tx_map <- plot_data %>%
- mutate(
- Treatment_Combined = ifelse(Treatment %in% c("None", "Control"), "Control", "Repeats"),
- Genotype_Tx = factor(
- interaction(Genotype, Treatment_Combined, sep = "_"),
- levels = c("WT_Control", "Het_Control", "Homo_Control",
- "WT_Repeats", "Het_Repeats", "Homo_Repeats")
- )
- ) %>%
- distinct(Ear_Tag, Genotype_Tx)
- scatter_wide <- exp_summary %>%
- left_join(geno_tx_map, by = "Ear_Tag")
- ### -----------------------------------------------------------
- ### 3. Build long format for each significant pair (with SAFETY CHECKS)
- ### -----------------------------------------------------------
- scatter_list <- list()
- for (i in seq_len(nrow(sig_pairs))) {
- v1 <- sig_pairs$Var1[i]
- v2 <- sig_pairs$Var2[i]
- # safety: skip comparisons whose variables are missing
- if (!(v1 %in% colnames(scatter_wide)) | !(v2 %in% colnames(scatter_wide))) {
- message("Skipping pair (missing column): ", v1, " -- ", v2)
- next
- }
- tmp <- scatter_wide %>%
- select(Ear_Tag, Genotype_Tx, all_of(v1), all_of(v2)) %>%
- rename(Value_x = all_of(v1),
- Value_y = all_of(v2)) %>%
- filter(!is.na(Value_x) & !is.na(Value_y)) %>%
- mutate(
- Var1 = v1,
- Var2 = v2,
- cor_original = sig_pairs$cor[i], padj_original = sig_pairs$padj[i], facet_id = paste(v1, "vs", v2)
- )
- scatter_list[[length(scatter_list) + 1]] <- tmp
- }
- scatter_df <- bind_rows(scatter_list)
- ### -----------------------------------------------------------
- ### 4. Compute R² per facet, but use original FDR from df_plot
- ### -----------------------------------------------------------
- pair_stats <- scatter_df %>%
- group_by(facet_id) %>%
- do({
- m <- lm(Value_y ~ Value_x, data = .)
- tibble(
- r2 = summary(m)$r.squared,
- p = glance(m)$p.value,
- cor_original = unique(.$cor_original),
- padj_original = unique(.$padj_original)
- )
- }) %>%
- ungroup() %>%
- mutate(
- label = sprintf(
- "R² = %.2f\np = %.3g\nFDR = %.3g",
- r2, p, padj_original
- )
- )
- scatter_df <- left_join(scatter_df, pair_stats, by = "facet_id")
- ### -----------------------------------------------------------
- ### 5. Genotype × Treatment Colors
- ### -----------------------------------------------------------
- genoTx_colors <- c(
- "WT_Repeats" = "#f15b60",
- "Het_Repeats" = "#f79151",
- "Homo_Repeats" = "#ffcb38",
- "WT_Control" = "#00b04f",
- "Het_Control" = "#109ab3",
- "Homo_Control" = "#8a77aa"
- )
- ### -----------------------------------------------------------
- ### 6. PAGINATION + FILLERS (4×6 layout)
- ### -----------------------------------------------------------
- facet_ids <- unique(scatter_df$facet_id)
- n_per_page <- 24 # 4 columns × 6 rows
- n_pages <- ceiling(length(facet_ids) / n_per_page)
- # filler facets to complete the last page
- fillers_needed <- n_pages * n_per_page - length(facet_ids)
- filler_df <- tibble()
- if (fillers_needed > 0) {
- filler_ids <- paste0("Filler_", seq_len(fillers_needed))
- filler_df <- tibble(
- facet_id = filler_ids,
- Value_x = NA,
- Value_y = NA,
- Genotype_Tx = factor(NA, levels = levels(scatter_df$Genotype_Tx)),
- label = ""
- )
- facet_ids <- c(facet_ids, filler_ids)
- }
- ### -----------------------------------------------------------
- ### 7. PDF output (each page is 4×6)
- ### -----------------------------------------------------------
- pdf("Significant_PhenotypePhenotype_ScatterPlots_R2_GenoTx_Paginated.pdf",
- width = 9, height = 10.5)
- for (page in seq_len(n_pages)) {
- start <- (page - 1) * n_per_page + 1
- end <- page * n_per_page
- these_facets <- facet_ids[start:end]
- page_data <- scatter_df %>%
- filter(facet_id %in% these_facets) %>%
- bind_rows(filler_df %>% filter(facet_id %in% these_facets)) %>%
- mutate(facet_id = factor(facet_id, levels = these_facets))
- p_page <- ggplot(page_data, aes(x = Value_x, y = Value_y)) +
- geom_point(aes(color = Genotype_Tx),
- size = 1.8, alpha = 0.85, na.rm = TRUE) +
- geom_smooth(method = "lm",
- se = FALSE,
- color = "black",
- linewidth = 0.7,
- na.rm = TRUE) +
- geom_text(
- aes(label = label),
- x = -Inf, y = Inf,
- hjust = -0.1, vjust = 1.2,
- size = 3,
- lineheight = 0.9,
- color = "black"
- ) +
- facet_wrap(~ facet_id, ncol = 4, nrow = 6, scales = "free") +
- scale_color_manual(
- name = "Genotype × Treatment",
- values = genoTx_colors,
- na.translate = FALSE
- ) +
- labs(
- title = paste("Significant Phenotype–Phenotype Scatter Plots (Page", page, ")"),
- x = "Phenotype A",
- y = "Phenotype B"
- ) +
- theme_bw(base_size = 6) +
- theme(
- plot.title = element_text(size = 14, face = "bold", hjust = 0.5),
- strip.background = element_rect(fill = "white", color = "black"),
- strip.text = element_text(size = 5, face = "bold"),
- legend.position = "bottom",
- panel.grid = element_blank()
- )
- print(p_page)
- }
- dev.off()
- ```
- ``` {r select_publication_boxplots_over_time}
- library(dplyr)
- library(ggplot2)
- library(ggnewscale)
- library(tibble)
- # --- Set parameters
- target_exps <- c("Iba1", "GR", "GP", "GFAP", "NeuN", "GA", "TDP_CE")
- target_stats <- c("Normalized_Area", "Sort1_CE_normalized")
- facet_ids_expected <- expand.grid(Exp = target_exps, StatsVariable = target_stats) %>%
- mutate(facet_id = paste(Exp, StatsVariable, sep = "_")) %>%
- pull(facet_id)
- # --- Filter + format base data
- plot_data <- data %>%
- filter(
- Exp %in% target_exps,
- Genotype == "Het",
- StatsVariable %in% target_stats
- ) %>%
- mutate(
- Treatment_Combined = ifelse(Treatment %in% c("None", "Control"), "Control", "Repeats"),
- Genotype_Tx = factor(interaction(Genotype, Treatment_Combined, sep = "_"),
- levels = c("Het_Control", "Het_Repeats")),
- Treatment_Shape = factor(Treatment, levels = c("None", "Control", "Repeats")),
- Sex = factor(Sex, levels = c("Female", "Male")),
- Time_month = factor(Time_month, levels = sort(unique(Time_month))),
- facet_id = paste(Exp, StatsVariable, sep = "_")
- ) %>%
- # ---- NEW FILTER: Keep only Het + Repeats imaging with Expression_Merged between 30–630 ----
- filter(
- # Keep ALL non-imaging OR non-Repeats rows
- !(Exp %in% imaging_exps & Treatment_Combined == "Repeats") |
- # Apply the 30–630 filter *only* for imaging × Repeats × Het rows
- (Exp %in% imaging_exps &
- Treatment_Combined == "Repeats" &
- Expression_Merged >= 30 &
- Expression_Merged <= 630)
- )
- # --- Fill in missing facets to ensure 3x4 layout
- existing_facets <- unique(plot_data$facet_id)
- missing_facets <- setdiff(facet_ids_expected, existing_facets)
- if (length(missing_facets) > 0) {
- filler_data <- tibble(
- Exp = gsub("_.*", "", missing_facets),
- StatsVariable = gsub(".*_", "", missing_facets),
- facet_id = missing_facets,
- Time_month = factor(NA, levels = levels(plot_data$Time_month)),
- Value = NA,
- Genotype_Tx = factor(NA, levels = c("Het_Control", "Het_Repeats")),
- Treatment_Shape = NA,
- Sex = NA
- )
- plot_data <- bind_rows(plot_data, filler_data)
- }
- # --- Add additional fillers to reach 12 panels (3x4)
- total_panels <- 12
- current_panels <- length(unique(plot_data$facet_id))
- if (current_panels < total_panels) {
- extra_fillers <- tibble(
- Exp = "Filler",
- StatsVariable = "Empty",
- facet_id = paste0("filler_", seq_len(total_panels - current_panels)),
- Time_month = factor(NA, levels = levels(plot_data$Time_month)),
- Value = NA,
- Genotype_Tx = factor(NA, levels = c("Het_Control", "Het_Repeats")),
- Treatment_Shape = NA,
- Sex = NA
- )
- plot_data <- bind_rows(plot_data, extra_fillers)
- }
- # --- Aesthetics
- custom_fill_colors <- c("Het_Control" = "#109ab3", "Het_Repeats" = "#f79151")
- sex_colors <- c("Female" = "red", "Male" = "blue")
- shape_values <- c("None" = 22, "Control" = 23, "Repeats" = 21)
- plot_data <- plot_data %>%
- mutate(
- facet_id = case_when(
- facet_id == "Iba1_Normalized_Area" ~ "Iba1\nNormalized\nArea",
- facet_id == "Iba1_Normalized_Count" ~ "Iba1\nNormalized\nCount",
- facet_id == "GR_Normalized_Area" ~ "GR\nNormalized\nArea",
- facet_id == "GR_Normalized_Count" ~ "GR\nNormalized\nCount",
- facet_id == "GFAP_Normalized_Area" ~ "GFAP\nNormalized\nArea",
- facet_id == "GFAP_Normalized_Count" ~ "GFAP\nNormalized\nCount",
- TRUE ~ facet_id
- )
- )
- # --- Plot
- pdf("Iba1_GR_GFAP_Het_AcrossTime_FIXED_3x4.pdf", width = 7, height = 9)
- p <- ggplot(plot_data, aes(
- x = Time_month,
- y = Value,
- fill = Genotype_Tx
- )) +
- geom_boxplot(
- aes(group = interaction(Time_month, Genotype_Tx)),
- position = position_dodge2(width = 0.75, preserve = "single"),
- outlier.shape = NA,
- width = 1,
- alpha = 0.9
- ) +
- scale_fill_manual(values = custom_fill_colors, name = "Genotype × Treatment") +
- ggnewscale::new_scale_fill() +
- geom_jitter(
- aes(
- fill = Sex,
- shape = Treatment_Shape,
- group = interaction(Time_month, Genotype_Tx)
- ),
- color = "black",
- size = 1.5,
- stroke = 0.5,
- alpha = 0.8,
- position = position_jitterdodge(dodge.width = 0.75, jitter.width = 0.2)
- ) +
- scale_fill_manual(values = sex_colors, name = "Sex") +
- scale_shape_manual(values = shape_values, name = "Original Treatment") +
- facet_wrap(~ facet_id, scales = "free_y", ncol = 3, nrow = 4) +
- labs(x = "Time (months)", y = "Value") +
- theme_classic(base_size = 10) +
- theme(
- strip.background = element_rect(fill = "grey90", color = "black"),
- strip.text = element_text(face = "bold", size = 9),
- axis.text.x = element_text(angle = 45, hjust = 1),
- legend.position = "right"
- )
- print(p)
- dev.off()
- ```
- ```{r Expression_distribution_plot_publication, include=FALSE}
- library(dplyr)
- library(tidyr)
- library(ggplot2)
- # ---------------------------------------------------------------
- # 1. PREPARE DATA (unique mice, log2-transform, compute stats)
- # ---------------------------------------------------------------
- repeats_data <- data %>%
- filter(
- Treatment == "Repeats",
- Expression_Merged > 0
- )
- # Extract Expression_* columns
- expression_cols <- grep("^Expression_", colnames(repeats_data), value = TRUE)
- repeats_data <- repeats_data %>%
- mutate(across(all_of(expression_cols), as.numeric))
- # Pivot Expression_* → one column, then keep UNIQUE mice
- unique_expression <- repeats_data %>%
- pivot_longer(
- cols = all_of(expression_cols),
- names_to = "Timepoint",
- values_to = "Expression"
- ) %>%
- filter(!is.na(Expression), Expression > 0) %>%
- distinct(Ear_Tag, .keep_all = TRUE) %>%
- select(Ear_Tag, Expression)
- # Raw-scale summary stats
- min_exp <- min(unique_expression$Expression)
- max_exp <- max(unique_expression$Expression)
- quart_raw <- quantile(unique_expression$Expression, probs = c(.25, .50, .75))
- mean_expression <- mean(unique_expression$Expression)
- median_expression <- median(unique_expression$Expression)
- # Convert everything to log2 space for plotting
- unique_expression <- unique_expression %>%
- mutate(Expression_log2 = log2(Expression))
- min_log <- log2(min_exp)
- max_log <- log2(max_exp)
- quart_log <- log2(quart_raw)
- mean_log <- log2(mean_expression)
- median_log <- log2(median_expression)
- # Dynamic bin width for histogram
- log_range <- max_log - min_log
- n_bins <- 20
- bin_width <- log_range / n_bins
- # ---------------------------------------------------------------
- # 2. HISTOGRAM PDF OUTPUT
- # ---------------------------------------------------------------
- pdf("Expression_Histogram_UniqueMice_log2.pdf", width = 3, height = 2)
- hist_plot <- ggplot(unique_expression, aes(x = Expression_log2)) +
- geom_rect(aes(xmin = min_log, xmax = quart_log[1], ymin = 0, ymax = Inf),
- fill = "lightblue", alpha = 0.4, inherit.aes = FALSE) +
- geom_rect(aes(xmin = quart_log[1], xmax = quart_log[2], ymin = 0, ymax = Inf),
- fill = "lightgreen", alpha = 0.4, inherit.aes = FALSE) +
- geom_rect(aes(xmin = quart_log[2], xmax = quart_log[3], ymin = 0, ymax = Inf),
- fill = "lightyellow", alpha = 0.4, inherit.aes = FALSE) +
- geom_rect(aes(xmin = quart_log[3], xmax = max_log, ymin = 0, ymax = Inf),
- fill = "lightpink", alpha = 0.4, inherit.aes = FALSE) +
- geom_histogram(binwidth = bin_width,
- color = "black", fill = "steelblue", alpha = 0.75) +
- geom_vline(xintercept = mean_log, color = "red", linetype = "dashed", linewidth = 1) +
- geom_vline(xintercept = median_log, color = "darkgreen", linetype = "dashed", linewidth = 1) +
- annotate("text", x = mean_log, y = 0,
- label = paste0("Mean: ", round(mean_expression,1)),
- hjust = -0.1, vjust = -1.5, color = "red", size = 3) +
- annotate("text", x = median_log, y = 0,
- label = paste0("Median: ", round(median_expression,1)),
- hjust = -0.1, vjust = -3, color = "darkgreen", size = 3) +
- scale_x_continuous(
- breaks = pretty(c(min_log, max_log), n = 5),
- labels = function(x) round(2^x, 1)
- ) +
- theme_classic() +
- labs(
- title = "Expression Histogram (Unique Mice, Repeats Only)",
- x = "Expression (raw units, log2 axis)",
- y = "Count"
- )
- print(hist_plot)
- dev.off()
- # ---------------------------------------------------------------
- # 3. DENSITY PDF OUTPUT
- # ---------------------------------------------------------------
- pdf("Expression_Density_UniqueMice_log2.pdf", width = 3, height = 2)
- density_plot <- ggplot(unique_expression, aes(x = Expression_log2)) +
- geom_rect(aes(xmin = min_log, xmax = quart_log[1], ymin = 0, ymax = Inf),
- fill = "lightblue", alpha = 0.4, inherit.aes = FALSE) +
- geom_rect(aes(xmin = quart_log[1], xmax = quart_log[2], ymin = 0, ymax = Inf),
- fill = "lightgreen", alpha = 0.4, inherit.aes = FALSE) +
- geom_rect(aes(xmin = quart_log[2], xmax = quart_log[3], ymin = 0, ymax = Inf),
- fill = "lightyellow", alpha = 0.4, inherit.aes = FALSE) +
- geom_rect(aes(xmin = quart_log[3], xmax = max_log, ymin = 0, ymax = Inf),
- fill = "lightpink", alpha = 0.4, inherit.aes = FALSE) +
- geom_density(fill = "steelblue", alpha = 0.6) +
- geom_vline(xintercept = mean_log, color = "red", linetype = "dashed", linewidth = 1) +
- geom_vline(xintercept = median_log, color = "darkgreen", linetype = "dashed", linewidth = 1) +
- annotate("text", x = mean_log, y = 0.01,
- label = paste0("Mean: ", round(mean_expression, 1)),
- hjust = -0.1, color = "red", size = 4) +
- annotate("text", x = median_log, y = 0.015,
- label = paste0("Median: ", round(median_expression, 1)),
- hjust = -0.1, color = "darkgreen", size = 4) +
- scale_x_continuous(
- breaks = pretty(c(min_log, max_log), n = 5),
- labels = function(x) round(2^x, 1)
- ) +
- theme_classic() +
- labs(
- title = "Expression Density (Unique Mice, Repeats Only)",
- x = "Expression (raw units, log2 axis)",
- y = "Density"
- )
- print(density_plot)
- dev.off()
- ```
KAR_Acta_Neuro_Comm_v1.13.Rmd, under CC-BY-4.0 · at the source
Overview
- Department of Neuroscience, Vickie and Jack Farber Institute for Neuroscience, Thomas Jefferson University, Philadelphia, PA 19107 USA
- Jefferson Weinberg ALS Center, Vickie and Jack Farber Institute for Neuroscience, Thomas Jefferson University, Philadelphia, PA 19107 USA
- Department of Neurology, Johns Hopkins University School of Medicine, Baltimore, MD 21205 USA
- Brain Science Institute, Johns Hopkins University School of Medicine, Baltimore, MD 21205 USA
Abstract
The abstract is not reproduced here: the paper's license (CC BY-NC-ND) does not allow it. Read it in the paper, at the publisher or on Europe PMC.
Repository
Its files are read in the Code ↔ Paper reader above, with 2 matches between paragraphs and lines of code.
figshare 32825642
Availability: 1 check, the latest on 27 September 2026: the link answers (HTTP 200)
- 27 September 2026: the link answers (HTTP 200)
1 file
- KAR_Acta_Neuro_Comm_v1.1
3.Rmd , R, 1,195 lines, 2 matches
Code availability statement
The paper has a code availability statement. Its license (CC BY-NC-ND) does not allow reproducing it here; in short, from what the harvester recognized in it:
- it points to the authors' code: figshare 32825642
Read it in the paper: doi.org/10.1186/s40478-026-02341-8.
Tracing map
Proposed by the machine: these links were found in the paper and verified at the source, without human review. The map will receive a Zenodo DOI once one of the paper's authors has validated it with their ORCID.
What the map holds:
- 1 repository of the authors' code, each at its verified commit, with its license and how the link was found in the paper;
- 1 script, each with its path and the digest of its content;
- 2 matches between paragraphs of the paper and lines of the code (method lexical-v1);
- neither the text of the paper nor the code itself.
Its JSON (tracing-map.json) is deposited on Zenodo with its DOI once the map is validated.
Data
Data links
- figshare:32825642, figshare; found in “Code availability”; this record also holds the authors' code (see Code)
Data availability statement
The paper has a data availability statement. Its license (CC BY-NC-ND) does not allow reproducing it here; in short, from what the harvester recognized in it:
- it points to a dataset: figshare 32825642
- it says that the data are available on request
Read it in the paper: doi.org/10.1186/s40478-026-02341-8.
Versions
The history of this record: each version stored by the harvester or made by a correction of its authors or of the maintainers of its code, and what changed in its facts. The texts of the paper (its abstract, its availability statements) are not part of it; versions that changed only those are not listed.
Version 1, 27 September 2026: the first record
Recorded: type, language, journal, volume, issue, pages, dates, 8 authors, 8 keywords, 16 MeSH terms, 5 funders, 94 references.
Cite
This paper
Russell, K. A., Shahrabi, A. A., Akerman, S. C., Byrne, M. D., Rothstein, J. D., Trotti, D., Jensen, B. K., & Haeusler, A. R. (2026). Intrathecal (G&
BibTeX
@article{russell2026intr
author = {Russell, Katelyn A and Shahrabi, Amelia A and Akerman, Suleyman C and Byrne, Matthew D and Rothstein, Jeffrey D and Trotti, Davide and Jensen, Brigid K and Haeusler, Aaron R},
title = {{Intrathecal (G\&
journal = {Acta neuropathologica communications},
year = {2026},
month = jun,
volume = {14},
number = {1},
pages = {167},
publisher = {BMC},
issn = {2051-5960},
doi = {10.1186/
url = {https://
pmid = {42316301},
pmcid = {PMC13476920}
}
RIS
TY - JOUR
AU - Russell, Katelyn A
AU - Shahrabi, Amelia A
AU - Akerman, Suleyman C
AU - Byrne, Matthew D
AU - Rothstein, Jeffrey D
AU - Trotti, Davide
AU - Jensen, Brigid K
AU - Haeusler, Aaron R
TI - Intrathecal (G&
T2 - Acta neuropathologica communications
J2 - Acta Neuropathol Commun
PY - 2026
DA - 2026/
VL - 14
IS - 1
SP - 167
SN - 2051-5960
PB - BMC
DO - 10.1186/
UR - https://
LA - en
ER -
CSL-JSON
{
"id": "10.1186/
"type": "article-journal",
"title": "Intrathecal (G&
"container-title": "Acta neuropathologica communications",
"author": [
{
"family": "Russell",
"given": "Katelyn A"
},
{
"family": "Shahrabi",
"given": "Amelia A"
},
{
"family": "Akerman",
"given": "Suleyman C"
},
{
"family": "Byrne",
"given": "Matthew D"
},
{
"family": "Rothstein",
"given": "Jeffrey D"
},
{
"family": "Trotti",
"given": "Davide"
},
{
"family": "Jensen",
"given": "Brigid K"
},
{
"family": "Haeusler",
"given": "Aaron R"
}
],
"container-title-short":
"volume": "14",
"issue": "1",
"page": "167",
"DOI": "10.1186/
"PMID": "42316301",
"PMCID": "PMC13476920",
"ISSN": "2051-5960",
"publisher": "BMC",
"URL": "https://
"language": "en",
"issued": {
"date-parts": [
[
2026,
6,
18
]
]
}
}
The tracing map gets a citation of its own once an author has validated it and it has a DOI.
Similar papers
The papers with a page that share the most with this one: the tools found in their code, their categories, datasets, cited references and authors, the rarest counting most.
- [1] doi:10.1073/pnas.2307814121
- Reversal of &
lt;i& gt;C9orf72& lt;/ i& gt; mutation-induced transcriptional dysregulation and pathology in cultured human neurons by allele-specific excision. Journal: Proceedings of the National Academy of Sciences of the United States of AmericaIn common: Alzheimer's / dementia, other condition, cellular / molecular, 13 references - [2] doi:10.3389/fncel.2023.1179796
- Moderate intrinsic phenotypic alterations in <i>C9orf72</
i> ALS/ FTD iPSC-microglia despite the presence of C9orf72 pathological features. Journal: Frontiers in cellular neuroscienceIn common: Alzheimer's / dementia, other condition, cellular / molecular, 13 references - [3] doi:10.1038/s41593-025-02075-1 [code]
- C9orf72 hexanucleotide repeat expansions impair microglial response in ALS.Journal: Nature neuroscienceIn common: ggplot2, tidyverse, other condition, mouse, cellular / molecular, 11 references
- [4] doi:10.1126/science.adv2600 [code]
- Blocking RAN translation without altering repeat RNAs rescues &
lt;i& gt;C9ORF72& lt;/ i& gt;-related ALS and FTD phenotypes. Journal: Science (New York, N.Y.)In common: Alzheimer's / dementia, other condition, mouse, 1 other category, 12 references - [5] doi:10.1038/s41467-022-33332-7
- CRISPR/
Cas9-mediated excision of ALS/ FTD-causing hexanucleotide repeat expansion in C9ORF72 rescues major disease mechanisms in vivo and in vitro. Journal: Nature communicationsIn common: Alzheimer's / dementia, other condition, mouse, 1 other category, 11 references - [6] doi:10.1038/s41593-024-01589-4 [code]
- PolyGR and polyPR knock-in mice reveal a conserved neuroprotective extracellular matrix signature in C9orf72 ALS/
FTD neurons. Journal: Nature neuroscienceIn common: Alzheimer's / dementia, other condition, mouse, 1 other category, 10 references - [7] doi:10.1186/s40478-024-01857-1 [code]
- Molecular pathology, developmental changes and synaptic dysfunction in (pre-) symptomatic human C9ORF72-ALS/
FTD cerebral organoids. Journal: Acta neuropathologica communicationsIn common: Alzheimer's / dementia, other condition, 10 references - [8] doi:10.1186/s40478-022-01322-x [code]
- Proximity proteomics of C9orf72 dipeptide repeat proteins identifies molecular chaperones as modifiers of poly-GA aggregation.Journal: Acta neuropathologica communicationsIn common: ggplot2, tidyverse, Alzheimer's / dementia, other condition, cellular / molecular, 8 references
- [9] doi:10.1093/brain/awaf340
- PU.1 restores microglial dysfunction caused by C9ORF72 repeat expansions in neural organoids.Journal: Brain : a journal of neurologyIn common: Alzheimer's / dementia, other condition, cellular / molecular, 9 references
- [10] doi:10.1038/s41467-024-55548-5
- A high-fidelity CRISPR-Cas13 system improves abnormalities associated with C9ORF72-linked ALS/
FTD. Journal: Nature communicationsIn common: Alzheimer's / dementia, other condition, mouse, 1 other category, 9 references
Contribute
The authors of this paper can claim it, correct its record and validate its tracing map, and the maintainers of its code (its owner, or a public member of its organization) correct what it says of their repository; anyone signed in can ask for its removal. Every request goes to OSCR's own machine, which answers it; your account page follows them.
Sign in with ORCID to claim this paper as one of its authors, correct its record or validate its tracing map: when the paper's metadata lists your ORCID iD, you are recognized at once. Maintainers of its code: sign in with GitHub, then claim the repository on your account page.
Claim this paper
Correct its record
Say what each link of this record is, remove the ones that are not the paper's, add the ones that are missing. The correction becomes a new version of the record, in its Versions section.
Validate its tracing map
You validate the map as this page shows it: 1 repository of the authors' code, each at its verified commit and with its license, 1 script, and 2 matches between paragraphs and code (see the Code and Map sections). It then receives a DOI on Zenodo, with you (your ORCID iD) and OSCR as its creators; the code itself is not deposited.
The map's fingerprint: sha256:ab569f601e2ee978…
Add the badge to the code's README
If you are an author or a maintainer of this paper's code, you can add this badge. It says what OSCR knows of the paper (its code, its validated tracing map) and links the code to this page. Paste one of these snippets under the README's title. Keep the two marks around it, so that the badge can be replaced in place and is never added twice. OSCR changes nothing in your repository.
Markdown
<!-- oscr-badge:start -->
[](https://openscicode.org/badge/doi/10.1186/s40478-026-02341-8)
<!-- oscr-badge:end -->reStructuredText
.. oscr-badge:start
.. image:: https://openscicode.org/badge/doi/10.1186/s40478-026-02341-8.svg
:target: https://openscicode.org/badge/doi/10.1186/s40478-026-02341-8
:alt: OSCR
.. oscr-badge:endHTML
<!-- oscr-badge:start -->
<a href="https://openscicode.org/badge/doi/10.1186/s40478-026-02341-8"><img src="https://openscicode.org/badge/doi/10.1186/s40478-026-02341-8.svg" alt="OSCR"></a>
<!-- oscr-badge:end -->If you choose to, you can have the badge kept up to date for you, with oscr badge --write from the command line or with the GitHub Action in your repository's workflows. Every other form and option (a card, AsciiDoc, LaTeX, shields.io) is on the badge page.
Request its removal
To ask OSCR to remove this record, the copies of its authors' scripts or its tracing map, use the removal request page: signed in, you say who you are, what to remove and why, then review and confirm the request. Published rules decide every request (how).
Discussion, reproductions, activity
Discussion: code errors and mismatches between the code and the paper about this paper and its code, from readers and its authors, beside the paper and its tracing map.
Report a mismatch between the code and the paper · Report a code error (signed in)
Reproductions: reports from readers who ran the authors' code and did not get the paper's result, what they ran, with which environment, commit and data.
Report a reproduction failure (signed in)
Activity: what happens around this paper: new versions of its record, its map's validation, discussions and reproductions. It opens with sign-in.
